Pages without language links
The following pages do not link to other language versions.
Showing below up to 500 results in range #501 to #1,000.
View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)
- Boot sequence (Maya)
- Boot sequence (Naon)
- Booting Linux Kernel
- Booting from NAND flash on i.MX6-based platforms
- Booting from NFS (XELK)
- Booting options (SBC Diva)
- Booting options (SBC Lynx)
- Booting the system via NFS (BELK/BXELK)
- Booting the system via NFS (DIVELK)
- Bootstrap settings (NaonEVB-Lite)
- Bootstrap settings (NaonEVB-Mid)
- BoraEVB
- BoraEVB-Lite
- BoraLite Adapter for the BoraXEVB carrier board
- BoraLite Embedded Linux Kit (BELK)
- BoraXEVB
- BoraX Embedded Linux Kit (BXELK)
- Bora Embedded Linux Kit (BELK)
- Bora Pages Updates
- Build system (BELK/BXELK)
- Building Linux kernel (BELK/BXELK)
- Building Linux kernel (DIVELK)
- Building Linux kernel (SDVX)
- Building Linux kernel (XELK)
- Building Linux kernel (XUELK)
- Building U-Boot (BELK/BXELK)
- Building U-Boot (DIVELK)
- Building U-Boot (SDVX)
- Building U-Boot (XELK)
- Building U-Boot (XUELK)
- Building the Yocto BSP (BELK/BXELK)
- Building the Yocto BSP (DIVELK)
- Building the Yocto BSP (SDVX)
- Building the Yocto BSP (XELK)
- Building the Yocto BSP (XUELK)
- Button Pressing Emulation On Android
- CAN interfaces (Naon)
- Carrier board design guidelines (SOM)
- Change Default U-Boot Console (Naon)
- Change Linux Command Line Parameter from U-boot
- ConfigID (XELK)
- ConfigID (XUELK)
- ConfigID and UniqueID
- ConfigID management (BELK/BXELK)
- Configuring UART3-4-5 (Naon)
- Connecting an LVDS display (Lizard)
- Connectors, buttons and switches (SBC Lynx)
- Creating a RFS with Buildroot
- Creating and building example Vivado project (BELK/BXELK)
- Customizing the splash screen (Axel)
- Cyber Security Services
- DESK-MP1-L
- DESK-MP1-L/Deployment/Customizing the splash screen
- DESK-MP1-L/Deployment/How to configure the network interfaces
- DESK-MP1-L/Deployment/MAC Address programming
- DESK-MP1-L/Development/Asymmetric Multiprocessing (AMP) with OpenAMP
- DESK-MP1-L/Development/Building Boot image
- DESK-MP1-L/Development/Building Linux kernel
- DESK-MP1-L/Development/Building the Yocto BSP
- DESK-MP1-L/Development/Hello World example
- DESK-MP1-L/Development/How to create a bootable microSD card
- DESK-MP1-L/Development/Management of prebuilt packages
- DESK-MP1-L/Development/Synchronizing git repositories
- DESK-MP1-L/Development/Using the STM32CubeMX Configuration file (.ioc)
- DESK-MP1-L/General/Booting from NFS
- DESK-MP1-L/General/ConfigID
- DESK-MP1-L/General/ConfigID and UniqueID
- DESK-MP1-L/General/Managed Virtual Machine (MVM)
- DESK-MP1-L/General/Release Notes
- DESK-MP1-L/Peripherals/DWS
- DESK-MP1-L/Peripherals/Ethernet
- DESK-MP1-L/Peripherals/GPIOs
- DESK-MP1-L/Peripherals/LCD
- DESK-MP1-L/Peripherals/RTC
- DESK-MP1-L/Peripherals/Touchscreen
- DESK-MP1-L/Peripherals/UARTs
- DESK-MP1-L/Peripherals/USB Host
- DESK-MP1-L/Peripherals/USB OTG
- DESK-MP1-L/Peripherals/micro SD
- DESK-MP1-L/pdf
- DESK-MX-L-AN-0005: How to synchronize date/time
- DESK-MX-L-AN-0006: Debugging with Eclipse
- DESK-MX-L-AN-0007: Getting Started With QT Creator
- DESK-MX-L-AN-0008: How to use UUU update utility
- DESK-MX6-L
- DESK-MX6-L-AN-0001: Crank Storyboard engine and application
- DESK-MX6-L-AN-0002:Getting started with Qt Creator
- DESK-MX6-L-AN-0003: Package Management with Yocto and DNF
- DESK-MX6-L-AN-0004: Capturing framebuffer screenshots
- DESK-MX6-L-AN-0008: Using USB Ethernet adapter as a second ethernet interface
- DESK-MX6-L-AN-0009: Comparing Java Virtual Machines
- DESK-MX6-L-AN-0010: User interaction with leds and pushbuttons
- DESK-MX6-L/Deployment/Booting from NAND flash
- DESK-MX6-L/Deployment/Customizing the splash screen
- DESK-MX6-L/Deployment/How to configure the network interfaces
- DESK-MX6-L/Deployment/Standalone boot
- DESK-MX6-L/Development/Building Linux kernel
- DESK-MX6-L/Development/Building U-Boot
- DESK-MX6-L/Development/Building the Yocto BSP
- DESK-MX6-L/Development/Hello word example
- DESK-MX6-L/Development/How to create a bootable microSD card
- DESK-MX6-L/Development/Synchronizing git repositories
- DESK-MX6-L/General/Booting from NFS
- DESK-MX6-L/General/ConfigID
- DESK-MX6-L/General/ConfigID and UniqueID
- DESK-MX6-L/General/DVDK Virtual Machine
- DESK-MX6-L/General/Release Notes
- DESK-MX6-L/Pheripherals/Audio
- DESK-MX6-L/Pheripherals/CAN
- DESK-MX6-L/Pheripherals/Ethernet
- DESK-MX6-L/Pheripherals/GPIOs
- DESK-MX6-L/Pheripherals/HDMI
- DESK-MX6-L/Pheripherals/LVDS
- DESK-MX6-L/Pheripherals/MIPI
- DESK-MX6-L/Pheripherals/PCI express
- DESK-MX6-L/Pheripherals/SD
- DESK-MX6-L/Pheripherals/UART
- DESK-MX6-L/Pheripherals/USB Host
- DESK-MX6-L/Pheripherals/USB OTG
- DESK-MX6-L/pdf
- DESK-MX6UL-AN-0002: Getting started with Qt Creator
- DESK-MX6UL-AN-0004: Using Python for Embedded applications
- DESK-MX6UL-AN-0005: Using DART for embedded applications
- DESK-MX6UL-L
- DESK-MX6UL-L-TN-0001: Using a 4G IoT modem
- DESK-MX6UL-L/Deployment/Booting from NAND flash
- DESK-MX6UL-L/Deployment/Customizing the splash screen
- DESK-MX6UL-L/Deployment/How to configure the network interfaces
- DESK-MX6UL-L/Deployment/Standalone boot
- DESK-MX6UL-L/Development/Building Linux kernel
- DESK-MX6UL-L/Development/Building U-Boot
- DESK-MX6UL-L/Development/Building the Yocto BSP
- DESK-MX6UL-L/Development/Hello word example
- DESK-MX6UL-L/Development/How to create a bootable microSD card
- DESK-MX6UL-L/Development/Synchronizing git repositories
- DESK-MX6UL-L/General/Booting from NFS
- DESK-MX6UL-L/General/ConfigID
- DESK-MX6UL-L/General/ConfigID and UniqueID
- DESK-MX6UL-L/General/DVDK Virtual Machine
- DESK-MX6UL-L/General/Release Notes
- DESK-MX6UL-L/Peripherals/Audio
- DESK-MX6UL-L/Peripherals/CAN
- DESK-MX6UL-L/Peripherals/Ethernet
- DESK-MX6UL-L/Peripherals/GPIOs
- DESK-MX6UL-L/Peripherals/LCD
- DESK-MX6UL-L/Peripherals/SD
- DESK-MX6UL-L/Peripherals/UART
- DESK-MX6UL-L/Peripherals/USB Host
- DESK-MX6UL-L/Peripherals/USB OTG
- DESK-MX6UL-L/pdf
- DESK-MX8M-AN-0001: Package Management with apt-get
- DESK-MX8M-AN-0002: Adding an audio interface with an USB bluetooth audio transmitter
- DESK-MX8M-AN-0003: Add an external RTC to SBC ORCA
- DESK-MX8M-AN-0004: Using DART for embedded applications
- DESK-MX8M-L
- DESK-MX8M-L/DESK-MX8M-L/Development/Synchronizing git repositories
- DESK-MX8M-L/Deployment/Boot from different storage devices
- DESK-MX8M-L/Deployment/Customizing the splash screen
- DESK-MX8M-L/Deployment/How to configure the network interfaces
- DESK-MX8M-L/Deployment/MAC Address programming
- DESK-MX8M-L/Deployment/Standalone boot
- DESK-MX8M-L/Development/Building Boot Image
- DESK-MX8M-L/Development/Building Linux kernel
- DESK-MX8M-L/Development/Building U-Boot
- DESK-MX8M-L/Development/Building the Yocto BSP
- DESK-MX8M-L/Development/Hello World example
- DESK-MX8M-L/Development/How to create a bootable microSD card
- DESK-MX8M-L/Development/Package management with apt-get
- DESK-MX8M-L/Development/Synchronizing git repositories
- DESK-MX8M-L/General/Booting from NFS
- DESK-MX8M-L/General/ConfigID
- DESK-MX8M-L/General/ConfigID and UniqueID
- DESK-MX8M-L/General/Managed Virtual Machine (MVM)
- DESK-MX8M-L/General/Release Notes
- DESK-MX8M-L/Peripherals/Audio
- DESK-MX8M-L/Peripherals/Ethernet
- DESK-MX8M-L/Peripherals/GPIOs
- DESK-MX8M-L/Peripherals/HDMI
- DESK-MX8M-L/Peripherals/LVDS
- DESK-MX8M-L/Peripherals/MIPI
- DESK-MX8M-L/Peripherals/PCI express
- DESK-MX8M-L/Peripherals/SD
- DESK-MX8M-L/Peripherals/UART
- DESK-MX8M-L/Peripherals/USB-C
- DESK-MX8M-L/Peripherals/USB1 OTG
- DESK-MX8M-L/Peripherals/USB2 OTG
- DESK-MX8M-L/Peripherals/WiFI
- DESK-MX8M-L/Pheripherals/CAN
- DESK-MX8M-L/pdf
- DESK-MX8M-TN-0001: Running Flutter on SBC ORCA
- DESK-MX9-L
- DESK-MX9-L/Deployment/Booting from different storage devices
- DESK-MX9-L/Deployment/Configuring the network interfaces
- DESK-MX9-L/Deployment/MAC Address programming
- DESK-MX9-L/Deployment/Power Manager
- DESK-MX9-L/Development/Building Boot Image
- DESK-MX9-L/Development/Building Linux kernel
- DESK-MX9-L/Development/Building the Yocto BSP
- DESK-MX9-L/Development/Hello World example
- DESK-MX9-L/Development/How to create a bootable microSD card
- DESK-MX9-L/Development/Package management with apt-get
- DESK-MX9-L/Development/Synchronizing git repositories
- DESK-MX9-L/General/Booting from nfs
- DESK-MX9-L/General/ConfigID
- DESK-MX9-L/General/ConfigID and UniqueID
- DESK-MX9-L/General/DVDK Virtual Machine
- DESK-MX9-L/General/Release Notes
- DESK-MX9-L/Peripherals/Audio
- DESK-MX9-L/Peripherals/CAN
- DESK-MX9-L/Peripherals/Ethernet
- DESK-MX9-L/Peripherals/GPIOs
- DESK-MX9-L/Peripherals/LVDS
- DESK-MX9-L/Peripherals/MIPI
- DESK-MX9-L/Peripherals/SD
- DESK-MX9-L/Peripherals/UART
- DESK-MX9-L/Peripherals/USB1 OTG
- DESK-MX9-L/Peripherals/USB2 OTG
- DESK-MX9-L/pdf
- DESK-XZ7-L
- DESK-XZ7-L-AN-0001: Using a VirtualBox Ubuntu 20.04 Virtual Machine
- DESK-XZ7-L-AN-0002: Asymmetric Multiprocessing (AMP) on Bora with OpenAMP
- DESK-XZ7-L-AN-0003: Using PXE protocol for boot
- DESK-XZ7-L-AN-0004: Using Python with BORA
- DESK-XZ7-L-AN-0005: Enabling dual Gigabit Ethernet support on BoraEVB/BoraXEVB
- DESK-XZ7-L-AN-0006: Package Management with Yocto and DNF
- DESK-XZ7-L/Deployment/How to configure the network interfaces
- DESK-XZ7-L/Deployment/Restoring U-Boot on NOR flash
- DESK-XZ7-L/Deployment/Standalone boot
- DESK-XZ7-L/Development/Creating and building the Petalinux project
- DESK-XZ7-L/Development/Creating and building the Vivado project
- DESK-XZ7-L/Development/Hello World example
- DESK-XZ7-L/Development/How to create a bootable microSD card
- DESK-XZ7-L/Development/Synchronizing git repositories
- DESK-XZ7-L/General/Booting from NFS
- DESK-XZ7-L/General/Build host
- DESK-XZ7-L/General/ConfigID
- DESK-XZ7-L/General/ConfigID and UniqueID
- DESK-XZ7-L/General/Release Notes
- DESK-XZ7-L/Peripherals/CAN
- DESK-XZ7-L/Peripherals/Console
- DESK-XZ7-L/Peripherals/Ethernet
- DESK-XZ7-L/Peripherals/NAND
- DESK-XZ7-L/Peripherals/NOR
- DESK-XZ7-L/Peripherals/Power meter
- DESK-XZ7-L/Peripherals/SD
- DESK-XZ7-L/Peripherals/Temperature sensor
- DESK-XZ7-L/Peripherals/UART
- DESK-XZ7-L/Peripherals/USB OTG
- DESK-XZ7-L/pdf
- DESK naming
- DIDO SOM Longevity Program
- DIVA SOM Longevity Program
- DIVELK-AN-001: Package Management with Yocto
- DIVELK-AN-002: Using Qt Creator
- DIVELK-AN-003: Using WiFi-Bluetooth combo plugin with SBCD
- DWM ADD-ON
- DWM ADD-ON/DWM Hardware
- DWM ADD-ON/DWM Hardware/Electrical Thermal and Mechanical Features/Mechanical specifications
- DWM ADD-ON/DWM Hardware/Electrical Thermal and Mechanical Features/Operational characteristics
- DWM ADD-ON/DWM Hardware/General Information/Chipset
- DWM ADD-ON/DWM Hardware/Hardware versioning and tracking
- DWM ADD-ON/DWM Hardware/Integration guide
- DWM ADD-ON/DWM Hardware/Pinout Table
- DWM ADD-ON/DWM Hardware/pdf
- DWM ADD-ON/Part number composition
- DWS ADD-ON
- DWS ADD-ON/DWS Hardware
- DWS ADD-ON/DWS Hardware/Electrical Thermal and Mechanical Features/Mechanical specifications
- DWS ADD-ON/DWS Hardware/Electrical Thermal and Mechanical Features/Operational characteristics
- DWS ADD-ON/DWS Hardware/General Information/Chipset
- DWS ADD-ON/DWS Hardware/Hardware versioning and tracking
- DWS ADD-ON/DWS Hardware/Integration guide
- DWS ADD-ON/DWS Hardware/Pinout Table
- DWS ADD-ON/DWS Hardware/pdf
- DWS ADD-ON/Part number composition
- DWS ADD-ON/Regulatory domain setup
- Dacu
- Dacu for the Axel SOM
- Dacu for the Diva SOM
- Dacu for the Lizard SOM
- Data integrity and I/O performance tests (DUL)
- Dave Developer's Wiki Conventions
- Dave Hardware Manuals
- Debugging Techniques For Embedded Linux Applications
- Deploying Embedded Linux Systems
- Design Overview (AxelLite)
- Design Overview (AxelUltra)
- Design overview (AXEL ULite)
- Developing the software for the target (DIVELK)
- Developing the software for the target (SDVX)
- Developing the software for the target (XUELK)
- Development Environment HowTo (NELK)
- Development Kits Identification Codes
- Dido Pages Updates
- Display-adapter-SBCAL10
- Display-adapter-SBCAL200
- Display-adapter-SBCAL300
- Display-adapter-SBCAL310
- Display-adapter-SBCAL320
- DivaEVB-Lite
- Diva Embedded Linux Kit (DIVELK)
- Diva Pages Updates
- EEPROM (BoraLite)
- ETRA SBC
- ETRA SBC/Electrical and Mechanical Documents/Mechanicals Specifications
- ETRA SBC/Electrical and Mechanical Documents/Schematics
- ETRA SBC/General Information/Block Diagram and Features
- ETRA SBC/General Information/Product Highlights
- ETRA SBC/Getting started/Boot Configurations
- ETRA SBC/Getting started/Connections and first boot
- ETRA SBC/Getting started/Reset Button
- ETRA SBC/Getting started/Unboxing
- ETRA SBC/Hello world example
- ETRA SBC/Interfaces and Connectors/AUX
- ETRA SBC/Interfaces and Connectors/CPU connector
- ETRA SBC/Interfaces and Connectors/Console
- ETRA SBC/Interfaces and Connectors/DWM
- ETRA SBC/Interfaces and Connectors/DWS
- ETRA SBC/Interfaces and Connectors/Ethernet
- ETRA SBC/Interfaces and Connectors/GPIOs
- ETRA SBC/Interfaces and Connectors/JTAG
- ETRA SBC/Interfaces and Connectors/LCD
- ETRA SBC/Interfaces and Connectors/MIPI
- ETRA SBC/Interfaces and Connectors/Power Supply
- ETRA SBC/Interfaces and Connectors/RTC
- ETRA SBC/Interfaces and Connectors/Touchscreen
- ETRA SBC/Interfaces and Connectors/UARTs
- ETRA SBC/Interfaces and Connectors/USB ports
- ETRA SBC/Interfaces and Connectors/WDT
- ETRA SBC/Interfaces and Connectors/micro SD
- ETRA SBC/Longevity program
- ETRA SBC/Part number composition
- ETRA SBC/pdf
- ETRA SOM
- ETRA SOM/ETRA Evaluation Kit
- ETRA SOM/ETRA Evaluation Kit/Electrical and Mechanical Documents/Mechanicals Specifications
- ETRA SOM/ETRA Evaluation Kit/Electrical and Mechanical Documents/Schematics
- ETRA SOM/ETRA Evaluation Kit/General Information/Block Diagram and Features
- ETRA SOM/ETRA Evaluation Kit/General Information/Product Highlights
- ETRA SOM/ETRA Evaluation Kit/Getting started/Boot Configurations
- ETRA SOM/ETRA Evaluation Kit/Getting started/Connections and first boot
- ETRA SOM/ETRA Evaluation Kit/Getting started/Kit Identification Codes
- ETRA SOM/ETRA Evaluation Kit/Getting started/Reset Button
- ETRA SOM/ETRA Evaluation Kit/Getting started/Unboxing
- ETRA SOM/ETRA Evaluation Kit/Integration guide
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/AUX
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/CPU connector
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/Console
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/DWM
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/DWS
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/Ethernet
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/GPIOs
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/JTAG
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/LCD
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/MIPI
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/Power Supply
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/RTC
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/Touchscreen
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/UARTs
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/USB ports
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/WDT
- ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/micro SD
- ETRA SOM/ETRA Evaluation Kit/Layout and Design guidelines
- ETRA SOM/ETRA Evaluation Kit/pdf
- ETRA SOM/ETRA Hardware
- ETRA SOM/ETRA Hardware/Electrical Thermal and Mechanical Features/Mechanical specifications
- ETRA SOM/ETRA Hardware/Electrical Thermal and Mechanical Features/Operational characteristics
- ETRA SOM/ETRA Hardware/Electrical Thermal and Mechanical Features/Thermal management and heat dissipation
- ETRA SOM/ETRA Hardware/General Information/Hardware versioning and tracking
- ETRA SOM/ETRA Hardware/General Information/Processor and memory subsystem
- ETRA SOM/ETRA Hardware/Part number composition
- ETRA SOM/ETRA Hardware/Peripherals/ADC
- ETRA SOM/ETRA Hardware/Peripherals/Audio
- ETRA SOM/ETRA Hardware/Peripherals/CAN
- ETRA SOM/ETRA Hardware/Peripherals/DAC
- ETRA SOM/ETRA Hardware/Peripherals/DCMI
- ETRA SOM/ETRA Hardware/Peripherals/DSI
- ETRA SOM/ETRA Hardware/Peripherals/Ethernet
- ETRA SOM/ETRA Hardware/Peripherals/GPIOs
- ETRA SOM/ETRA Hardware/Peripherals/HDMI-CEC
- ETRA SOM/ETRA Hardware/Peripherals/I2C
- ETRA SOM/ETRA Hardware/Peripherals/IO expander
- ETRA SOM/ETRA Hardware/Peripherals/LCD
- ETRA SOM/ETRA Hardware/Peripherals/QUADSPI
- ETRA SOM/ETRA Hardware/Peripherals/Real Time Clock
- ETRA SOM/ETRA Hardware/Peripherals/SDMMC
- ETRA SOM/ETRA Hardware/Peripherals/SPI
- ETRA SOM/ETRA Hardware/Peripherals/USART
- ETRA SOM/ETRA Hardware/Peripherals/USB Host
- ETRA SOM/ETRA Hardware/Peripherals/USB OTG
- ETRA SOM/ETRA Hardware/Peripherals/Watchdog
- ETRA SOM/ETRA Hardware/Pinout Table
- ETRA SOM/ETRA Hardware/Power and Reset/JTAG
- ETRA SOM/ETRA Hardware/Power and Reset/Power Supply Unit (PSU) and recommended power-up sequence
- ETRA SOM/ETRA Hardware/Power and Reset/Reset scheme and control signals
- ETRA SOM/ETRA Hardware/Power and Reset/System boot
- ETRA SOM/ETRA Hardware/pdf
- ETRA SOM/Longevity program
- ETRA SOM/Part number composition
- Embedded Android FAQs
- Embedded Design Services
- Embedded Design Services/Part Number Composition
- Embedded Linux
- Embedded Linux tips and tricks
- Embedded systems security and IoT
- Enabling I2C2 on Linux (Diva)
- Enabling SPI1 and SPI3 on Linux (Naon)
- Enabling SPI1 on Linux (Diva)
- Extra Ethernet interface (XUAE)
- FAQs (Axel)
- FAQs (Bora/BoraX/BoraLite)
- FAQs (Diva)
- FAQs (Naon)
- FAQs (XUELK)
- Flashing Images (Naon)
- Frame Buffer Management (Naon)
- General disclaimer
- Grounding (SBC Lynx)
- Hardware Manual (AXEL ULite)
- Hardware Manual (AxelLite)
- Hardware Manual (AxelUltra)
- Hardware Manual (Bora)
- Hardware Manual (Dido)
- Hardware Manual (Diva)
- Hardware Manual (Lizard)
- Hardware Manual (Maya)
- Hardware Manual (NAON)
- Hardware Manual (SBC Lynx)
- Host setup and development flow (BELK/BXELK)
- HowTo Contact Sales Support
- HowTo Contact Technical Support
- HowTo Use The Real Time Clock
- How to configure the network interfaces
- How to create a bootable microSD card (XELK)
- How to create a bootable microSD card (XUELK)
- How to install the VirtualBox Guest Additions
- How to update NELK
- I2C busses and peripherals (Maya)
- I2C busses and peripherals (Naon)
- IO-expander-SBC4K4L
- Industrial Tablet
- Integration guide (AXEL ULite)
- Integration guide (Axel)
- Integration guide (AxelUltra)
- Integration guide (Bora/BoraX/BoraLite)
- Integration guide (Dido)
- Integration guide (Diva)
- Integration guide (Lizard)
- Integration guide (Maya)
- Integration guide (Naon)
- Introduction to development environment (BELK/BXELK)
- IoT-WP-001: Cloud UI Design
- IoT Services
- IoT Services/Part Number Composition
- JTAG interfaces (NaonEVB-Lite)
- JTAG interfaces (NaonEVB-Mid)
- LCC USB SSD (DUL)
- LELK-AN-001: Package installation using opkg
- LELK Release Notes
- Linux and interrupt latency (Axel)
- LizardEVB-Lite
- Lizard Embedded Linux Kit (LELK)
- Lizard SOM
- Logical structure of Bora and BoraX Embedded Linux Kits (BELK/BXELK)
- MIPI and MINI PCIe expander-SBCAM
- MISC-AN-001: Creating a root file system using Buildroot
- MISC-TN-001: Triple video output on i.MX6 DualPlus-based Android platform
- MISC-TN-002: The scalability of the Axel family: a real-world example
- MISC-TN-003: Asymmetric multiprocessing on NXP i.MX6SoloX
- MISC-TN-004: Running Debian (armbian) on SBCSPG
- MISC-TN-005: Running AWS Greengrass Core on SBCSPG
- MISC-TN-006: Implementing a full Industrial IoT system with SBCSPG, Eclipse Kura™, and Eclipse Kapua™
- MISC-TN-007: Using Node-RED on SBCSPG to develop zero code applications
- MISC-TN-008: Running Debian Buster (armbian) on Mito8M
- MISC-TN-009: Characterizing the RAM bandwidth of Mito8M SoM
- MISC-TN-010: Using NXP eIQ Machine Learning Development Environment with Mito8M SoM
- MISC-TN-011: Running an Azure-generated TensorFlow Lite model on Mito8M SoM using NXP eIQ
- MISC-TN-012: Secure over-the-air (OTA) software update of IoT gateway fleet
- MISC-TN-013: Enabling node.js and electron.js for creating Javascript applications
- MISC-TN-014: Yocto and Debian packetization
- MISC-TN-015: Proof-of-Concept of an industrial, high-frame-rate video recording/streaming system
- MISC-TN-015: Yocto and git protocol error
- MISC-TN-016: Visual Studio Code and SSH remote development on Mito8M SoM
- MISC-TN-017: Persistent storage and read-write file systems
- MISC-TN-018: Visual Studio Code and SSH remote development on SBCSPG Industrial IoT Gateway
- MISC-TN-019: Post-portem analysis of embedded Linux systems — Part 1
- MISC-TN-020: Running AWS IoT Greengrass Core version 2 on SBCSPG
- MISC-TN-021: SBCSPG and ThingsBoard IoT
- MISC-TN-022: Advanced controller for DMX / RDM lighting applications
- MISC-TN-023: Altium Designer-based workflow
- MISC-TN-024: Automated test equipment (ATE) monitoring with SBCSPG gateway and ThingsBoard IoT platform
- MISC-TN-025: Running Phoronix Test Suite on SBCSPG IIoT gateway
- MISC-TN-026: Automated test equipment (ATE) monitoring with SBCSPG gateway, ThingsBoard IoT, and Fledge
- MISC-TN-027 — Qualifying a product for industrial, harsh environments: resilience against power supply anomalies
- MISC-TN-028: GitLab-based workflow
- MISC-TN-029 — A monitoring system for IoT devices with Glances, InfluxDB, and Grafana
- MISC-TN-030: Running Debian (bookworm) on RIALTO
- MISC-TN-TBD: Integrating ThingsBoard and Node-RED on SBCSPG IoT Gateway
- MITO8M-AN-001: Advanced multicore debugging, tracing, and energy profiling with Lauterbach TRACE32
- MITO 8M Mini SOM