DESK-MP1-L/Development/How to create a bootable microSD card
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | ||
|---|---|---|
| Issue Date | Notes | |
| DESK-MP1-L-1.0.0 release | ||
| 2023/08/31 | Minor changes | |
Contents
How to create a bootable microSD card[edit | edit source]
The process is relatively straightforward: it consists of writing the WIC file of interest generated by Yocto onto the SD card. There are multiple ways to do that.
The most common is to use the well-known BalenaEtcher tool (download BalenaEtcher). The following instruction explains how to use it on a Windows host. The procedure is similar when working with a Linux host.
- Download the desired binary image to flash (
*.wicor*.wic.bz2)- Among the binaries made available in the mirror there are several
*.wic.bz2files for the available releases. In particular, there is thedesk-image-qt5-openstlinux-weston-desk-mp1.wic.bz2file. This image is the one used to program the microSD card delivered along with the evaluation kit.
- Among the binaries made available in the mirror there are several
- Connect the microSD card to the PC Host
- Open BalenaEtcher tool
- Once the tool is open:
- Select the binary to flash by clicking on "Flash from file"
- Select the microSD to flash by clicking on "Select target"
- Flash the uSD by clicking o "Flash".
Flashing the microSD card with STM32CubeProgrammer[edit | edit source]
Another way is to use the STM32CubeProgrammer tool, which has a little different approach than BalenaEtcher as it allows to program the card without removing it from the target. Furthermore, STM32CubeProgrammer makes use of several files generated by Yocto instead of the WIC image. For the sake of simplicity, the following procedure shows how to run STM32CubeProgrammer on the MVM so that it can access these files directly. By default, STM32CubeProgrammer is not installed in the MVM. Please refer to the STM documentation for installation instructions. In principle, the same procedure can be executed on a Windows host as well. It is worth remembering that the programming procedure is obviously much slower when executed in a virtual machine like MVM.
First of all, execute the build with Yocto to generate the required files. See here for more information.
dvdk@vagrant:~/desk-mp1-l$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo-1 > repo
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 29945 100 29945 0 0 696k 0 --:--:-- --:--:-- --:--:-- 696k
dvdk@vagrant:~/desk-mp1-l$ chmod a+x repo
dvdk@vagrant:~/desk-mp1-l$ ./repo init -u https://git.dave.eu/git/desk-mp1-l/desk-mp1-l-bsp.git -b refs/tags/desk-mp1-l-1.0.1
...
repo has been initialized in /home/dvdk/desk-mp1-l
dvdk@vagrant:~/desk-mp1-l$ ./repo sync
...
dvdk@vagrant:~/desk-mp1-l$ EULA=1 DISTRO=openstlinux-weston MACHINE=desk-mp1 source ./desk-setup-release.sh
...
dvdk@vagrant:~/desk-mp1-l/build$ bitbake dave-image-qt5-weston
...
dvdk@vagrant:~/desk-mp1-l/build$ EULA=1 DISTRO=openstlinux-weston MACHINE=desk-mp1 source ./desk-setup-release.sh
...
dvdk@vagrant:~/desk-mp1-l/build$ bitbake dave-image-qt5-weston
Open STM32CubeProgrammer, click on Open file, and select the tsv file /home/dvdk/desk-mp1-l/build/tmp-glibc/deploy/images/desk-mp1/flashlayout_dave-image-qt5-weston/trusted/FlashLayout_sdcard_stm32mp157a-dcsb5000dd1r-trusted.tsv.
Click on Browse and select the directory with the artifacts generated by Yocto /home/dvdk/desk-mp1-l/build/tmp-glibc/deploy/images/desk-mp1/.
On the target, change the S1 DIP-switch into ON-ON-ON-OFF.
Connect the board (connector J16) to the host with a USB <-> USB OTG cable.
Add the device detected to the MVM:
Establish the connection with STM32CubeProgrammer tool:
- Select USB instead of ST-LINK.
- Make sure that the
Portvalue is notNo DFU detected. It should be something likeUSB1. - Click on
Connect.
Click on Download for programming the microSD card.
Attention: the board resets after the first programming steps, so make sure that the device remains connected to the MVM during the process. Otherwise, repeat the connection steps.
When programming ends, this message appears:
Unplug the OTG cable, power off the target, and change the DIP-switch into ON-OFF-ON-OFF.
Power on the board. If the procedure was completed properly, you will see the typical bootstrap messages on the console:
NOTICE: CPU: STM32MP157AAB Rev.B
NOTICE: Model: DAVE desk-mp1 stm32mp157a-dcsb5000dd1r
INFO: PMIC version = 0x21
INFO: Reset reason (0x14):
INFO: Pad Reset from NRST
INFO: FCONF: Reading TB_FW firmware configuration file from: 0x2ffe2000
INFO: FCONF: Reading firmware configuration information for: stm32mp_io
INFO: Using SDMMC
INFO: Instance 1
INFO: Boot used partition fsbl1
NOTICE: BL2: v2.6-stm32mp1-r2.0(debug):desk-mp1-l-1.0.0(709eafce)
NOTICE: BL2: Built : 08:34:10, Jul 25 2023
INFO: BL2: Doing platform setup
INFO: RAM: DDR3-DDR3L 16bits 533000kHz
INFO: Memory size = 0x20000000 (512 MB)
INFO: BL2: Loading image id 1
INFO: Loading image id=1 at address 0x2ffff000
INFO: Image id=1 loaded: 0x2ffff000 - 0x2ffff226
INFO: FCONF: Reading FW_CONFIG firmware configuration file from: 0x2ffff000
INFO: FCONF: Reading firmware configuration information for: dyn_cfg
INFO: FCONF: Reading firmware configuration information for: stm32mp1_firewall
INFO: BL2: Loading image id 4
INFO: Loading image id=4 at address 0x2ffc5000
INFO: Image id=4 loaded: 0x2ffc5000 - 0x2ffd9820
INFO: BL2: Skip loading image id 8
INFO: BL2: Skip loading image id 9
INFO: BL2: Loading image id 2
INFO: Loading image id=2 at address 0xc0500000
INFO: Image id=2 loaded: 0xc0500000 - 0xc0512e30
INFO: BL2: Loading image id 16
INFO: Loading image id=16 at address 0x2ffc0000
INFO: Image id=16 loaded: 0x2ffc0000 - 0x2ffc3ff5
INFO: BL2: Loading image id 5
INFO: Loading image id=5 at address 0xc0100000
INFO: Image id=5 loaded: 0xc0100000 - 0xc01e8ba0
NOTICE: BL2: Booting BL32
INFO: Entry point address = 0x2ffc5000
INFO: SPSR = 0x1d3
NOTICE: SP_MIN: v2.6-stm32mp1-r2.0(debug):desk-mp1-l-1.0.0(709eafce)
NOTICE: SP_MIN: Built : 08:34:10, Jul 25 2023
INFO: ARM GICv2 driver initialized
INFO: ETZPC: UART1 (3) could be non secure
INFO: ETZPC: SPI6 (4) could be non secure
INFO: ETZPC: RNG1 (7) could be non secure
INFO: ETZPC: HASH1 (8) could be non secure
INFO: ETZPC: CRYP1 (9) could be non secure
INFO: ETZPC: I2C6 (12) could be non secure
INFO: SP_MIN: Initializing runtime services
INFO: SP_MIN: Preparing exit to normal world
serial_stm32 serial@40010000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
U-Boot 2021.10-desk-mp1-l-1.0.0 (Jul 25 2023 - 08:53:53 +0000)
CPU: STM32MP157AAB Rev.B
Model: Dave desk-mp1 stm32mp157a-dcsb5000dd1r
Board: Etra in trusted mode (st,stm32mp157a-dcsb5000dd1r)
DRAM: 512 MiB
Clocks:
- MPU : 650 MHz
- MCU : 208.878 MHz
- AXI : 266.500 MHz
- PER : 0 MHz
- DDR : 533 MHz
WDT: Started with servicing (32s timeout)
NAND: 0 MiB
MMC: STM32 SD/MMC: 2, STM32 SD/MMC: 0, STM32 SD/MMC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
SOM ConfigID#: 00000001
SOM UniqueID#: 39303435:33385105:001e0024
CB ConfigID#: 00000001
CB UniqueID#: 0d000035:c4a4762d
Board: ETRA on SBC
Net: eth0: ethernet@5800a000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
1151 bytes read in 4 ms (280.3 KiB/s)
Running bootscript from mmc ...
## Executing script at c2000000
bootscript generated with command "./tools/mkimage -C none -A arm -T script -d boot.src.cmd boot.scr.uimg"
60967 bytes read in 6 ms (9.7 MiB/s)
8766008 bytes read in 374 ms (22.4 MiB/s)
## Booting kernel from Legacy Image at c2000000 ...
Image Name: Linux-5.15.67-desk-mp1-l-1.0.0
Created: 2023-07-25 9:04:16 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 8765944 Bytes = 8.4 MiB
Load Address: c2000040
Entry Point: c2000040
Verifying Checksum ... OK
## Flattened Device Tree blob at c4000000
Booting using the fdt blob at 0xc4000000
XIP Kernel Image
Loading Device Tree to cffee000, end cffffe26 ... OK
ETZPC: 0x54003000 node disabled, decprot 7=0
ETZPC: 0x48001000 node disabled, decprot 89=2
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.67-desk-mp1-l-1.0.0 (oe-user@oe-host) (arm-ostl-linux-gnueabi-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Tue Jul 25 09:04:16 UTC 2023
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Dave desk-mp1 stm32mp157a-dcsb5000dd1r
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mcuram2@10000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10041000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0vring1@10041000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0buffer@10042000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10048000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mcu_rsc_table@10048000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mcuram@30000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node retram@38000000, compatible id shared-dma-pool
[ 0.000000] cma: Reserved 128 MiB at 0xd8000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000c0000000-0x00000000dfffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000d3ffffff]
[ 0.000000] node 0: [mem 0x00000000d4000000-0x00000000d7ffffff]
[ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000dfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000c0000000-0x00000000dfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 17 pages/cpu s37004 r8192 d24436 u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: root=/dev/mmcblk1p10 rootwait rw console=ttySTM0,115200
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 300948K/524288K available (13312K kernel code, 1379K rwdata, 3896K rodata, 1024K init, 218K bss, 92268K reserved, 131072K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000029] Switching to timer-based delay loop, resolution 41ns
[ 0.001195] Console: colour dummy device 80x30
[ 0.001268] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001301] pid_max: default: 32768 minimum: 301
[ 0.001618] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001653] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.003036] CPU: Testing write buffer coherency: ok
[ 0.003567] /cpus/cpu@0 missing clock-frequency property
[ 0.003637] /cpus/cpu@1 missing clock-frequency property
[ 0.003670] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005405] Setting up static identity map for 0xc0100000 - 0xc0100060
[ 0.005671] rcu: Hierarchical SRCU implementation.
[ 0.008100] smp: Bringing up secondary CPUs ...
[ 0.009497] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009764] smp: Brought up 1 node, 2 CPUs
[ 0.009805] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.009824] CPU: All CPU(s) started in SVC mode.
[ 0.010806] devtmpfs: initialized
[ 0.032433] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.032846] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.032891] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.040446] pinctrl core: initialized pinctrl subsystem
[ 0.043156] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.046675] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.048584] thermal_sys: Registered thermal governor 'step_wise'
[ 0.048965] cpuidle: using governor menu
[ 0.049357] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.049390] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.049940] Serial: AMBA PL011 UART driver
[ 0.053200] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
[ 0.053255] stm32-pm-domain pm_domain: subdomain core-power-domain registered
[ 0.053277] stm32-pm-domain pm_domain: domains probed
[ 0.087638] platform panel-rgb@0: Fixing up cyclic dependency with 5a001000.display-controller
[ 0.106095] Kprobes globally optimized
[ 0.121733] SCSI subsystem initialized
[ 0.122736] usbcore: registered new interface driver usbfs
[ 0.122827] usbcore: registered new interface driver hub
[ 0.122911] usbcore: registered new device driver usb
[ 0.123328] pps_core: LinuxPPS API ver. 1 registered
[ 0.123349] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.123389] PTP clock support registered
[ 0.123744] EDAC MC: Ver: 3.0.0
[ 0.124928] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 0.125049] arm-scmi firmware:scmi: SCMI Protocol v2.0 'ST:' Firmware version 0x0
[ 0.126512] Advanced Linux Sound Architecture Driver Initialized.
[ 0.127690] Bluetooth: Core ver 2.22
[ 0.127787] NET: Registered PF_BLUETOOTH protocol family
[ 0.127806] Bluetooth: HCI device and connection manager initialized
[ 0.127832] Bluetooth: HCI socket layer initialized
[ 0.127852] Bluetooth: L2CAP socket layer initialized
[ 0.127891] Bluetooth: SCO socket layer initialized
[ 0.128960] clocksource: Switched to clocksource arch_sys_counter
[ 0.222709] NET: Registered PF_INET protocol family
[ 0.223093] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.224777] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.224852] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.224882] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.224954] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.225057] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.225207] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.225265] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.225617] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.226925] RPC: Registered named UNIX socket transport module.
[ 0.226961] RPC: Registered udp transport module.
[ 0.226975] RPC: Registered tcp transport module.
[ 0.226988] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.229353] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.231542] Initialise system trusted keyrings
[ 0.232045] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.243706] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.245211] NFS: Registering the id_resolver key type
[ 0.245398] Key type id_resolver registered
[ 0.245416] Key type id_legacy registered
[ 0.245635] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.245943] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.246841] fuse: init (API version 7.34)
[ 0.388552] NET: Registered PF_ALG protocol family
[ 0.388596] Key type asymmetric registered
[ 0.388611] Asymmetric key parser 'x509' registered
[ 0.388797] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.388825] io scheduler mq-deadline registered
[ 0.388840] io scheduler kyber registered
[ 0.398701] reg11: supplied by regulator-dummy
[ 0.399561] reg18: supplied by regulator-dummy
[ 0.400029] usb33: supplied by regulator-dummy
[ 0.404634] STM32 USART driver initialized
[ 0.427643] brd: module loaded
[ 0.438559] loop: module loaded
[ 0.447889] CAN device driver interface
[ 0.450335] pegasus: Pegasus/Pegasus II USB Ethernet driver
[ 0.450444] usbcore: registered new interface driver pegasus
[ 0.450531] usbcore: registered new interface driver asix
[ 0.450616] usbcore: registered new interface driver ax88179_178a
[ 0.450696] usbcore: registered new interface driver cdc_ether
[ 0.450782] usbcore: registered new interface driver smsc75xx
[ 0.450864] usbcore: registered new interface driver smsc95xx
[ 0.450930] usbcore: registered new interface driver net1080
[ 0.451013] usbcore: registered new interface driver cdc_subset
[ 0.451078] usbcore: registered new interface driver zaurus
[ 0.451243] usbcore: registered new interface driver cdc_ncm
[ 0.452540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.452600] ehci-platform: EHCI generic platform driver
[ 0.452879] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.452917] ohci-platform: OHCI generic platform driver
[ 0.453740] usbcore: registered new interface driver cdc_acm
[ 0.453763] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.453856] usbcore: registered new interface driver usb-storage
[ 0.458291] i2c_dev: i2c /dev entries driver
[ 0.462476] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[ 0.462512] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
[ 0.464460] sdhci: Secure Digital Host Controller Interface driver
[ 0.464488] sdhci: Copyright(c) Pierre Ossman
[ 0.464502] Synopsys Designware Multimedia Card Interface Driver
[ 0.465026] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.466320] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.466428] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 0.466683] SMCCC: SOC_ID: ID = jep106:0020:0500 Revision = 0x00002000
[ 0.467619] hid: raw HID events driver (C) Jiri Kosina
[ 0.467904] usbcore: registered new interface driver usbhid
[ 0.467928] usbhid: USB HID core driver
[ 0.476894] NET: Registered PF_PACKET protocol family
[ 0.476955] can: controller area network core
[ 0.477074] NET: Registered PF_CAN protocol family
[ 0.477096] can: raw protocol
[ 0.477114] can: broadcast manager protocol
[ 0.477135] can: netlink gateway - max_hops=1
[ 0.477579] Bluetooth: RFCOMM TTY layer initialized
[ 0.477626] Bluetooth: RFCOMM socket layer initialized
[ 0.477680] Bluetooth: RFCOMM ver 1.11
[ 0.478143] lib80211: common routines for IEEE802.11 drivers
[ 0.478693] Key type dns_resolver registered
[ 0.478822] ThumbEE CPU extension supported.
[ 0.478855] Registering SWP/SWPB emulation handler
[ 0.479523] registered taskstats version 1
[ 0.479562] Loading compiled-in X.509 certificates
[ 0.519231] stm32-mdma 58000000.dma-controller: STM32 MDMA driver registered
[ 0.522591] stm32-dma 48000000.dma-controller: no dma pool: can't use MDMA: 0
[ 0.524312] stm32-dma 48000000.dma-controller: STM32 DMA driver registered
[ 0.533158] stm_thermal 50028000.thermal: stm_thermal_probe: Driver initialized successfully
[ 0.540358] /soc/interrupt-controller@5000d000: bank0
[ 0.540416] /soc/interrupt-controller@5000d000: bank1
[ 0.540447] /soc/interrupt-controller@5000d000: bank2
[ 0.542491] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOA bank added
[ 0.543238] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOB bank added
[ 0.543954] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOC bank added
[ 0.544657] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOD bank added
[ 0.545412] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOE bank added
[ 0.546143] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOF bank added
[ 0.546883] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOG bank added
[ 0.547546] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOH bank added
[ 0.547627] stm32mp157-pinctrl soc:pinctrl@50002000: Pinctrl STM32 initialized
[ 0.548624] stm32mp157-pinctrl soc:pinctrl@54004000: at least one GPIO bank is required
[ 0.548659] stm32mp157-pinctrl: probe of soc:pinctrl@54004000 failed with error -22
[ 0.550723] LCD_5V: supplied by vin
[ 0.551536] wlan-en-regulator: supplied by vin
[ 0.555478] stm32-usart 4000f000.serial: interrupt mode for rx (no dma)
[ 0.555519] stm32-usart 4000f000.serial: interrupt mode for tx (no dma)
[ 0.555558] 4000f000.serial: ttySTM1 at MMIO 0x4000f000 (irq = 49, base_baud = 4000000) is a stm32-usart
[ 0.557765] stm32-usart 40010000.serial: interrupt mode for rx (no dma)
[ 0.557802] stm32-usart 40010000.serial: interrupt mode for tx (no dma)
[ 0.557839] 40010000.serial: ttySTM0 at MMIO 0x40010000 (irq = 50, base_baud = 4000000) is a stm32-usart
[ 1.850996] printk: console [ttySTM0] enabled
[ 1.857628] stm32-usart 40018000.serial: interrupt mode for rx (no dma)
[ 1.863016] stm32-usart 40018000.serial: interrupt mode for tx (no dma)
[ 1.869560] 40018000.serial: ttySTM3 at MMIO 0x40018000 (irq = 51, base_baud = 4000000) is a stm32-usart
[ 1.881281] stm32-usart 40019000.serial: interrupt mode for rx (no dma)
[ 1.886575] stm32-usart 40019000.serial: interrupt mode for tx (no dma)
[ 1.893259] 40019000.serial: ttySTM2 at MMIO 0x40019000 (irq = 52, base_baud = 4000000) is a stm32-usart
[ 1.909403] stm32-dwmac 5800a000.ethernet: IRQ eth_lpi not found
[ 1.914981] stm32-dwmac 5800a000.ethernet: User ID: 0x40, Synopsys ID: 0x42
[ 1.921142] stm32-dwmac 5800a000.ethernet: DWMAC4/5
[ 1.926014] stm32-dwmac 5800a000.ethernet: DMA HW capability register supported
[ 1.933440] stm32-dwmac 5800a000.ethernet: RX Checksum Offload Engine supported
[ 1.940753] stm32-dwmac 5800a000.ethernet: TX Checksum insertion supported
[ 1.947636] stm32-dwmac 5800a000.ethernet: Wake-Up On Lan supported
[ 1.954085] stm32-dwmac 5800a000.ethernet: TSO supported
[ 1.959297] stm32-dwmac 5800a000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.967097] stm32-dwmac 5800a000.ethernet: Enabled L3L4 Flow TC (entries=2)
[ 1.974107] stm32-dwmac 5800a000.ethernet: Enabled RFS Flow TC (entries=8)
[ 1.981034] stm32-dwmac 5800a000.ethernet: TSO feature enabled
[ 1.986911] stm32-dwmac 5800a000.ethernet: Using 32 bits DMA width
[ 2.001601] stm32_rtc 5c004000.rtc: registered as rtc0
[ 2.005421] stm32_rtc 5c004000.rtc: setting system clock to 2000-01-01T01:17:06 UTC (946689426)
[ 2.014794] stm32_rtc 5c004000.rtc: Date/Time must be initialized
[ 2.020269] stm32_rtc 5c004000.rtc: registered rev:1.2
[ 2.046020] stm32f7-i2c 40015000.i2c: using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers
[ 2.054152] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[ 2.085185] stpmic1 1-0033: PMIC Chip Version: 0x21
[ 2.093814] vddcore: supplied by vin
[ 2.099105] vdd_ddr: supplied by vin
[ 2.104284] vdd: supplied by vin
[ 2.109173] v3v3: supplied by vin
[ 2.114111] v1v8_audio: supplied by v3v3
[ 2.120927] v3v3_hdmi: supplied by vin
[ 2.126920] vtt_ddr: supplied by vdd_ddr
[ 2.132354] vdd_usb: supplied by vin
[ 2.138151] vdda: supplied by vin
[ 2.143677] v1v2_hdmi: supplied by v3v3
[ 2.149514] vref_ddr: supplied by vin
[ 2.155209] bst_out: supplied by vin
[ 2.158236] vbus_otg: supplied by bst_out
[ 2.162409] vbus_sw: supplied by bst_out
[ 2.171796] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 2.178999] rtc-ds3232 1-0068: registered as rtc1
[ 2.183240] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-1 bus adapter
[ 2.190552] i2c i2c-0: Added multiplexed i2c bus 2
[ 2.194038] i2c-mux-gpio i2cmux: 1 port mux on STM32F7 I2C(0x40015000) adapter
[ 2.206163] mmci-pl18x 48004000.mmc: mmc0: PL180 manf 53 rev2 at 0x48004000 irq 38,0 (pio)
[ 2.407704] mmci-pl18x 58005000.mmc: Got CD GPIO
[ 2.412283] mmci-pl18x 58005000.mmc: mmc1: PL180 manf 53 rev2 at 0x58005000 irq 42,0 (pio)
[ 2.433028] mmc0: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes)
[ 2.445196] mmc0: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes)
[ 2.448841] mmci-pl18x 58007000.mmc: mmc2: PL180 manf 53 rev2 at 0x58007000 irq 43,0 (pio)
[ 2.454003] mmc0: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes)
[ 2.467531] mmc0: queuing unknown CIS tuple 0x14 [] (0 bytes)
[ 2.478559] mmc0: new high speed SDIO card at address 0001
[ 2.499820] stm32-ipcc 4c001000.mailbox: ipcc rev:1.0 enabled, 6 chans, proc 0
[ 2.507352] stm32-rproc 10000000.m4: IRQ index 0 not found
[ 2.514121] remoteproc remoteproc0: m4 is available
[ 2.520534] rfkill_gpio bt_rfkill: bt_rfkill device registered.
[ 2.525980] LCD_VDD: supplied by vdd
[ 2.529307] TOUCH_VDD: supplied by vdd
[ 2.533575] mmc1: new high speed SDHC card at address 59b4
[ 2.535152] stm32-usbphyc 5a006000.usbphyc: registered rev:1.0
[ 2.539675] mmcblk1: mmc1:59b4 USDU1 14.9 GiB
[ 2.551901] dwc2 49000000.usb-otg: supply vusb_d not found, using dummy regulator
[ 2.558386] dwc2 49000000.usb-otg: supply vusb_a not found, using dummy regulator
[ 2.574981] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
[ 2.602527] mmc2: new DDR MMC card at address 0001
[ 2.607338] mmcblk2: mmc2:0001 W62704 3.53 GiB
[ 2.617614] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 2.624137] mmcblk2boot0: mmc2:0001 W62704 2.00 MiB
[ 2.630956] mmcblk2boot1: mmc2:0001 W62704 2.00 MiB
[ 2.637231] mmcblk2rpmb: mmc2:0001 W62704 512 KiB, chardev (240:0)
[ 2.706495] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
[ 2.713781] dwc2 49000000.usb-otg: DWC OTG Controller
[ 2.717692] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 1
[ 2.725280] dwc2 49000000.usb-otg: irq 74, io mem 0x49000000
[ 2.732163] hub 1-0:1.0: USB hub found
[ 2.734593] hub 1-0:1.0: 1 port detected
[ 2.746472] ehci-platform 5800d000.usb: EHCI Host Controller
[ 2.751093] ehci-platform 5800d000.usb: new USB bus registered, assigned bus number 2
[ 2.759330] ehci-platform 5800d000.usb: irq 75, io mem 0x5800d000
[ 2.789047] ehci-platform 5800d000.usb: USB 2.0 started, EHCI 1.00
[ 2.795268] hub 2-0:1.0: USB hub found
[ 2.797701] hub 2-0:1.0: 2 ports detected
[ 2.803514] ohci-platform 5800c000.usb: Generic Platform OHCI controller
[ 2.808862] ohci-platform 5800c000.usb: new USB bus registered, assigned bus number 3
[ 2.817306] ohci-platform 5800c000.usb: irq 45, io mem 0x5800c000
[ 2.894442] hub 3-0:1.0: USB hub found
[ 2.896878] hub 3-0:1.0: 2 ports detected
[ 2.904118] input: pmic_onkey as /devices/platform/soc/5c002000.i2c/i2c-1/1-0033/5c002000.i2c:stpmic@33:onkey/input/input0
[ 2.919666] [drm] Initialized stm 1.0.0 20170330 for 5a001000.display-controller on minor 0
[ 2.967971] Console: switching to colour frame buffer device 100x30
[ 2.989844] stm32-display 5a001000.display-controller: [drm] fb0: stmdrmfb frame buffer device
[ 3.000691] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.012330] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.017941] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.026262] cfg80211: failed to load regulatory.db
[ 3.026718] ALSA device list:
[ 3.033989] No soundcards found.
[ 3.084344] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 3.093364] VFS: Mounted root (ext4 filesystem) on device 179:10.
[ 3.100592] devtmpfs: mounted
[ 3.104371] Freeing unused kernel image (initmem) memory: 1024K
[ 3.119480] Run /sbin/init as init process
[ 3.468579] systemd[1]: System time before build time, advancing clock.
[ 3.592388] NET: Registered PF_INET6 protocol family
[ 3.638925] Segment Routing with IPv6
[ 3.641500] In-situ OAM (IOAM) with IPv6
[ 3.703883] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 3.735467] systemd[1]: Detected architecture arm.
Welcome to ST OpenSTLinux - Weston - (A Yocto Project Based Distro) 4.0.4-snapshot-20230408 (kirkstone)!
[ 3.940815] systemd[1]: Hostname set to <desk-mp1>.
[ 3.955676] systemd[1]: Initializing machine ID from random generator.
[ 4.039778] systemd[1]: Using hardware watchdog 'Software Watchdog', version 0, device /dev/watchdog0
[ 4.047762] systemd[1]: Watchdog running with a timeout of 32s.
[ 6.667897] systemd[1]: /lib/systemd/system/mount-partitions.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 6.711705] systemd[1]: Queued start job for default target Multi-User System.
[ 6.786390] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 6.823575] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 6.863561] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 6.902882] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 6.940153] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 6.979902] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 7.020108] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 7.059486] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 7.099446] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 7.129490] systemd[1]: Reached target Swaps.
[ OK ] Reached target Swaps.
[ 7.197005] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 7.239638] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 7.280631] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 7.335740] systemd[1]: Listening on Process Core Dump Socket.
[ OK ] Listening on Process Core Dump Socket.
[ 7.370036] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 7.418278] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[ 7.429397] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 7.470828] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 7.511077] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 7.550923] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.590386] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.630620] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 7.670676] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 7.690868] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 7.737488] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 7.777328] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 7.819519] systemd[1]: Mounting Temporary Directory /tmp...
Mounting Temporary Directory /tmp...
[ 7.870379] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 7.918262] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 7.958062] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 7.998366] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 8.037947] systemd[1]: Starting Mount partitions...
Starting Mount partitions...
[ 8.085655] systemd[1]: Starting RPC Bind...
Starting RPC Bind...
[ 8.120141] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 8.166240] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 8.195070] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
[ 8.230714] systemd[1]: Mounting NFSD configuration filesystem...
Mounting NFSD configuration filesystem...
[ 8.280113] systemd[1]: Starting Generate network units from Kernel command line...
Starting Generate network …ts from Kernel command line...
[ 8.353043] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 8.409068] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 8.475944] EXT4-fs (mmcblk1p10): re-mounted. Opts: (null). Quota mode: disabled.
[ 8.503216] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 8.598444] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ 8.631033] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 8.650885] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 8.691132] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 8.730449] systemd[1]: Mounted Temporary Directory /tmp.
[ OK ] Mounted Temporary Directory /tmp.
[ 8.773325] systemd[1]: Finished Create List of Static Device Nodes.
[ OK ] Finished Create List of Static Device Nodes.
[ 8.792296] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 8.812024] EXT4-fs (mmcblk1p8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 8.821503] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 8.840643] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[FAILED] Failed to mount NFSD configuration filesystem.
See 'systemctl status proc-fs-nfsd.mount' for details.
[DEPEND] Dependency failed for NFS server and services.
[DEPEND] Dependency failed for NFS Mount Daemon.
[ OK ] Finished Generate network units from Kernel command line.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished Apply Kernel Variables.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
[ OK ] Started Starts Psplash Boot screen.
[ 9.369825] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
Starting Flush Journal to Persistent Storage...
Starting Create[ 9.498091] systemd-journald[603]: Received client request to flush runtime journal.
System Users...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ 9.856101] EXT4-fs (mmcblk1p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ OK ] Finished Mount partitions.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /var/volatile...
Starting Resize root files…to fit available disk space...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Mounted /var/volatile.
Starting Load/Save Random Seed...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Coldplug All udev Devices.
Starting Wait for udev To …plete Device Initialization...
[ OK ] Created slice Slice /system/systemd-backlight.
Starting Load/Save Screen …ness of backlight:backlight...
[ OK ] Finished Load/Save Screen …htness of backlight:backlight.
[ 12.162114] wlan: loading out-of-tree module taints kernel.
[ 12.302130] Galcore version 6.4.9.436021
[ 13.465162] using random self ethernet address
[ 13.468256] using random host ethernet address
[ 13.812041] usb0: HOST MAC 5c:c0:78:d3:5c:60
[ 13.814935] usb0: MAC 86:80:fd:a1:db:63
[ 13.854235] dwc2 49000000.usb-otg: bound driver configfs-gadget
[ 13.859057] random: crng init done
[ OK ] Finished Load/Save Random Seed.
[ 14.038386] dwc2 49000000.usb-otg: new device is high-speed
[ 14.072449] dwc2 49000000.usb-otg: new address 39
[ 14.126410] wlan: loading driver v4.5.25.46
[ 14.162882] hifDeviceInserted: Dumping clocks (50000000,99000000)
[ 14.412522] [TELIT] Using WE866C6 board data.
[ 14.524974] ol_download_firmware: chip_id:0x5020001 board_id:0x0
[ 14.553604] __ol_transfer_bin_file: Failed to get bdwlan30_c6.b00:-2
[ 14.558611] __ol_transfer_bin_file: Trying to load default bdwlan30_c6.bin
[ 14.646945] __ol_transfer_bin_file: Loading setup file qsetup30.bin
[ 14.663241] __ol_transfer_bin_file: Failed to get qsetup30.bin:-2
[ 14.819133] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ 15.373085] R0: wlan: [751:E :SAP] dfs_init_radar_filters[217]: Unknown dfs domain 0
[ 15.576912] Host SW:4.5.25.46, FW:0.0.0.111, HW:QCA93x7_REV1_1
[ 15.598824] ENTER sme_set_btc_coex_dutycycle = 30
[ 15.598862] ENTER sme_set_btc_coex_dutycycle =30
[ 15.607920] ath_hif_sdio: HIF (Atheros/multi-bss)
[ 15.617314] wlan: driver loaded in 1490000
[ OK ] Finished Wait for udev To Complete Device Initialization.
[ OK ] Reached target Hardware activated USB gadget.
[ 16.363425] EXT4-fs (mmcblk1p10): resizing filesystem from 264203 to 1048576 blocks
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ *** ] A start job is running for Resize r…ilable disk space (22s / no limit)
[ ***] A start job is running for Resize r…ilable disk space (23s / no limit)
[ 29.912763] EXT4-fs (mmcblk1p8): resizing filesystem from 65536 to 65536 blocks
[ 29.941441] EXT4-fs (mmcblk1p9): resizing filesystem from 16384 to 16384 blocks
[ *** ] A start job is running for Resize r…ilable disk space (25s / no limit)
[ **] A start job is running for Resize r…ilable disk space (32s / no limit)
[*** ] A start job is running for Resize r…ilable disk space (44s / no limit)
[ ***] A start job is running for Resize r…ilable disk space (54s / no limit)
[ *** ] A start job is running for Resize r…le disk space (1min 9s / no limit)
[ ***] A start job is running for Resize r…e disk space (1min 22s / no limit)
[ **] A start job is running for Resize r…e disk space (1min 35s / no limit)
[* ] A start job is running for Resize r…e disk space (1min 46s / no limit)
[ **] A start job is running for Resize r…e disk space (1min 56s / no limit)
[** ] A start job is running for Resize r…le disk space (2min 7s / no limit)
[ *** ] A start job is running for Resize r…e disk space (2min 19s / no limit)
[ **] A start job is running for Resize r…e disk space (2min 32s / no limit)
[ ***] A start job is running for Resize r…e disk space (2min 44s / no limit)
[** ] A start job is running for Resize r…e disk space (2min 56s / no limit)
[** ] A start job is running for Resize r…le disk space (3min 9s / no limit)
[ *** ] A start job is running for Resize r…e disk space (3min 18s / no limit)
[ OK ] Finished Resize root files…m to fit available disk space.
[ OK ] Reached target Local File Systems.
Starting Rebuild Dynamic Linker Cache...
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
Starting Rebuild Journal Catalog...
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Finished Rebuild Journal Catalog.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ OK ] Finished Rebuild Dynamic Linker Cache.
Starting Update is Completed...
[ OK ] Finished Update is Completed.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timer Units.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on dropbear.socket.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
[ OK ] Started Job spooling tools.
[ OK ] Started Periodic Command Scheduler.
Starting D-Bus System Message Bus...
Starting IPv6 Packet Filtering Framework...
Starting IPv4 Packet Filtering Framework...
Starting Hold until boot process finishes up...
[ OK ] Started System Logging Service.
Starting Resets System Activity Logs...
Starting User Login Management...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Finished IPv6 Packet Filtering Framework.
[ OK ] Finished IPv4 Packet Filtering Framework.
[ OK ] Finished Hold until boot process finishes up.
[ OK ] Finished Resets System Activity Logs.
[ OK ] Reached target Preparation for Network.
Starting Network Configuration...
Starting Check if the gpu …orrect weston configuration...
[ OK ] Started User Login Management.
Starting Userfs cleanup package...
[ OK ] Finished Check if the gpu … correct weston configuration.
[ OK ] Finished Userfs cleanup package.
[ OK ] Started Network Configuration.
Starting Network Name Resolution...
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started IIO Daemon.
Starting Real time performance monitoring...
[ OK ] Started NFS status monitor for NFSv2/3 locking..
[ OK ] Started Respond to IPv6 Node Information Queries.
[ OK ] Started Network Router Discovery Daemon.
Starting Permit User Sessions...
Starting Target Communication Framework agent...
[ OK ] Started Xinetd A Powerful Replacement For Inetd.
[ OK ] Finished Permit User Sessions.
[ OK ] Started Target Communication Framework agent.
[ OK ] Started Real time performance monitoring.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttySTM0.
[ OK ] Reached target Login Prompts.
[ OK ] Started Weston, a Wayland …mpositor, as a system service.
[ OK ] Reached target Multi-User System.
Starting Record Runlevel Change in UTMP...
Starting User Database Manager...
[ OK ] Finished Record Runlevel Change in UTMP.
[ OK ] Started User Database Manager.
ST OpenSTLinux - Weston - (A Yocto Project Based Distro) 4.0.4-snapshot desk-mp1 ttySTM0
desk-mp1 login: root (automatic login)
alias: gawkpath_default not found
alias: gawkpath_prepend not found
alias: gawkpath_append not found
alias: gawklibpath_default not found
alias: gawklibpath_prepend not found
alias: gawklibpath_append not found
root@desk-mp1:~#
