Building U-Boot (XUELK)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
History[edit | edit source]
| Version | Date | XUELK version | Notes |
|---|---|---|---|
| August 2015 | XUELK 1.0.0 | ||
| March 2017 | XUELK 1.1.3 | ||
| 1.2.0 | May 2017 | XUELK 1.2.0 | Update for new XUELK release |
| 2.0.0 | Sep 2017 | XUELK 2.0.0 | Update for new XUELK release |
| 2.0.3 | Jan 2019 | XUELK 2.0.3 | Add support for NOR ISSI |
Quick reference[edit | edit source]
| URL | git@git.dave.eu:lynx/u-boot-imx.git |
|---|---|
| stable branch | lynx |
| stable tag | xuelk-2.0.3 |
| Platform | SOM ConfigID | CB ConfigID | defconfig |
|---|---|---|---|
| SBC Lynx | 0x00000008, 0x0000000C, 0x00000013 | any | mx6ul_lynx_defconfig |
| Axel ULite | 0x0000000B, 0x00000014 | any | mx6ul_axelulite_defconfig |
Detailed Instructions[edit | edit source]
It is assumed that the development environment has been set up properly as described here.
- start the Linux development VM and login into the system
- open a terminal window and cd into U-Boot source code
cd lynx/u-boot
- in case of needs you can update your local repository with the following git command
git pull
- configure the build environment
source ~/env.sh
- enter the source tree directory and run the following commands:
make mx6ul_lynx_defconfig make
NOTE: this is the default configuration suitable for latest SBC Lynx target.
- The former command selects the default XUELK configuration suitable for latest SBC Lynx targets (for additional defconfig please refer to the U-Boot defconfigs table above), while the latter builds the U-Boot binary image itself (
u-boot.imx).
u-boot.imx can be copied to the tftp root directory /tftpboot/lynx/ with the following command:
cp u-boot.imx /tftpboot/lynx/
Please refer to this page for more information on how to update the bootloader on your board.
