DESK-MP1-L/General/Release Notes
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| DESK-MP1-L-1.0.0 release | |||
| 2023/08/31 | DESK-MP1-L-1.0.1 release | ||
Contents
Release Notes[edit | edit source]
DAVE Embedded Systems adds to the latest Linux BSP from STMicroelectronics the customization required to support the SOC platform. For this reason most of the documentation provided by STMicroelectronics remains valid for the DESK development kit.
However, some customization is required, in particular at bootloader and linux kernel levels.
The following table reports the DESK releases information.
| DESK version | |
|---|---|
| Release number | 1.0.1 |
| Release type | Minor |
| Status | Released |
| Release date | 31/07/2023 |
| Release notes | Ver 1.0.1 |
| Product support | ETRA SOM, ETRA SBC |
| MVM (distro version) | Ubuntu 20.04 |
| U-Boot version | 2021.10-desk-mp1-l-1.0.1 |
| Linux version | 5.15.67-desk-mp1-l-1.0.1 |
| Drivers |
UART debug (2-wire) Ethernet |
| Manufacturer BSP version | openstlinux-5.15-yocto-kirkstone-mp1-v22.11.23 |
| Graphic libraries | Qt 5.15.3 |
| Build System | Yocto kirkstone |
DESK-MP1-L 1.0.1[edit | edit source]
Release notes:
- Change URL from ssh to https protocol
Known Limitations[edit | edit source]
The following table reports the known limitations of this DESK release:
| Issue | Description |
|---|---|
| Run Qt5 application from serial console | Start a Qt application from the serial console requires some environment variables to be set: see here |
Downloadable binary images[edit | edit source]
All binary images for DESK-MP1-L are hosted on DAVE Embedded System mirror server. There you can find a sub directory for each version of this development kit.
U-Boot performs 2-stage bootloader providing two files: ATF and fip. Both two files must be stored into SD card using dd command.
A summary of images with a brief description can be found into the table below:
| Image | DESK version 1.0.1 |
|---|---|
| Platform | DCSB50000 |
| Carrier Board ConfigID | 0001 |
| LCD panel | Ampire AM-800480BTMQW-TBMH-A 800x480 7"RGB |
| Touchscreen | capacitive (USB) |
| ATF | ATF |
| Fip | uSD FIP |
| Linux kernel | uImage |
| Device tree | stm32mp157a-dcsb5000dd1r |
DESK-MP1-L 1.0.0[edit | edit source]
Release notes:
- First release based on STM
openstlinux-5.15
Known Limitations[edit | edit source]
The following table reports the known limitations of this DESK release:
| Issue | Description |
|---|---|
| Run Qt5 application from serial console | Start a Qt application from the serial console requires some environment variables to be set: see here |
Downloadable binary images[edit | edit source]
All binary images for DESK-MP1-L are hosted on DAVE Embedded System mirror server. There you can find a sub directory for each version of this development kit.
U-Boot performs 2-stage bootloader providing two files: ATF and fip. Both two files must be stored into SD card using dd command.
A summary of images with a brief description can be found into the table below:
| Image | DESK version 1.0.0 |
|---|---|
| Platform | DCSB50000 |
| Carrier Board ConfigID | 0001 |
| LCD panel | Ampire AM-800480BTMQW-TBMH-A 800x480 7"RGB |
| Touchscreen | capacitive (USB) |
| ATF | ATF |
| Fip | uSD FIP |
| Linux kernel | uImage |
| Device tree | stm32mp157a-dcsb5000dd1r |
