DESK-MP1-L/General/Booting from NFS
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2023/08/01 | DESK-MP1-L-1.0.0 release | ||
Contents
Booting from NFS[edit | edit source]
This configuration is very helpful during the software development (both for kernel and applications). The kernel image is downloaded via TFTP while the root file system is remotely mounted via NFS from the host. It is assumed that the development host:
- is connected with the target host board through an Ethernet LAN
- exports the directory containing the root file system for the target through the NFS server
- runs a TFTP server.
- has a proper subnet IP address
net_nfs configuration[edit | edit source]
DESK-MP1-L Virtual Machine is properly configured for the TFTP and NFS debug.
In any case, some variables has to be configured on the target and the VM itself has to be configured for respect to the network environment.
Host (Virtual Machine) configuration[edit | edit source]
The DESK-MP1-L Virtual Machine has the tftp and nfs services already running. Optionally, their configuration has to be changed according to the network configuration where the target is connected to.
Check and properly configure the items describe in VirtualBox Network Configuration
Target configuration[edit | edit source]
The IP address for server and target should be configured: an example (for a network subnet 192.168.0.x)
=> setenv serverip 192.168.0.125 => setenv ipaddr 192.168.0.90
serveripis the IP address of the host machine running the tftp/nfs serveripaddris the IP address of the target
The kernel and device tree files has to be selected
=> setenv bootfile desk-mp1-l/uImage => setenv fdtfile desk-mp1-l/stm32mp157a-dcsb5000dd1r.dtb
finally, the root file system directory on the Virtual Machine should be configured for let the kernel to find the INIT
=> setenv rootpath /home/dvdk/desk-mp1-l/rfs/desk-MP1-l/
To run this configuration just issue the net_nfs command which firstly download the kernel and device tree using the tftp protocol
NOTICE: CPU: STM32MP157AAB Rev.B
NOTICE: Model: DAVE desk-mp1 stm32mp157a-dcsb5000dd1r
INFO: PMIC version = 0x21
INFO: Reset reason (0x15):
INFO: Power-on Reset (rst_por)
INFO: FCONF: Reading TB_FW firmware configuration file from: 0x2ffe2000
INFO: FCONF: Reading firmware configuration information for: stm32mp_io
INFO: Using SDMMC
INFO: Instance 1
INFO: Boot used partition fsbl1
NOTICE: BL2: v2.6-stm32mp1-r2.0(debug):desk-mp1-l-1.0.0(709eafce)
NOTICE: BL2: Built : 08:34:10, Jul 25 2023
INFO: BL2: Doing platform setup
INFO: RAM: DDR3-DDR3L 16bits 533000kHz
INFO: Memory size = 0x20000000 (512 MB)
INFO: BL2: Loading image id 1
INFO: Loading image id=1 at address 0x2ffff000
INFO: Image id=1 loaded: 0x2ffff000 - 0x2ffff226
INFO: FCONF: Reading FW_CONFIG firmware configuration file from: 0x2ffff000
INFO: FCONF: Reading firmware configuration information for: dyn_cfg
INFO: FCONF: Reading firmware configuration information for: stm32mp1_firewall
INFO: BL2: Loading image id 4
INFO: Loading image id=4 at address 0x2ffc5000
INFO: Image id=4 loaded: 0x2ffc5000 - 0x2ffd9820
INFO: BL2: Skip loading image id 8
INFO: BL2: Skip loading image id 9
INFO: BL2: Loading image id 2
INFO: Loading image id=2 at address 0xc0500000
INFO: Image id=2 loaded: 0xc0500000 - 0xc0512e30
INFO: BL2: Loading image id 16
INFO: Loading image id=16 at address 0x2ffc0000
INFO: Image id=16 loaded: 0x2ffc0000 - 0x2ffc3ff5
INFO: BL2: Loading image id 5
INFO: Loading image id=5 at address 0xc0100000
INFO: Image id=5 loaded: 0xc0100000 - 0xc01e8ba0
NOTICE: BL2: Booting BL32
INFO: Entry point address = 0x2ffc5000
INFO: SPSR = 0x1d3
NOTICE: SP_MIN: v2.6-stm32mp1-r2.0(debug):desk-mp1-l-1.0.0(709eafce)
NOTICE: SP_MIN: Built : 08:34:10, Jul 25 2023
INFO: ARM GICv2 driver initialized
INFO: ETZPC: UART1 (3) could be non secure
INFO: ETZPC: SPI6 (4) could be non secure
INFO: ETZPC: RNG1 (7) could be non secure
INFO: ETZPC: HASH1 (8) could be non secure
INFO: ETZPC: CRYP1 (9) could be non secure
INFO: ETZPC: I2C6 (12) could be non secure
INFO: SP_MIN: Initializing runtime services
INFO: SP_MIN: Preparing exit to normal world
serial_stm32 serial@40010000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
U-Boot 2021.10-desk-mp1-l-1.0.0 (Jul 25 2023 - 08:53:53 +0000)
CPU: STM32MP157AAB Rev.B
Model: Dave desk-mp1 stm32mp157a-dcsb5000dd1r
Board: Etra in trusted mode (st,stm32mp157a-dcsb5000dd1r)
DRAM: 512 MiB
Clocks:
- MPU : 650 MHz
- MCU : 208.878 MHz
- AXI : 266.500 MHz
- PER : 0 MHz
- DDR : 533 MHz
WDT: Started with servicing (32s timeout)
NAND: 0 MiB
MMC: STM32 SD/MMC: 2, STM32 SD/MMC: 0, STM32 SD/MMC: 1
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
invalid MAC address 0 in OTP 00:00:00:00:00:00
SOM ConfigID#: 00000001
SOM UniqueID#: 39303435:33385105:001e0024
CB ConfigID#: 00000001
CB UniqueID#: 0d000035:c4a4762d
Board: ETRA on SBC
Net:
Warning: ethernet@5800a000 (eth0) using random MAC address - 0a:7f:53:9f:1a:77
eth0: ethernet@5800a000
Hit any key to stop autoboot: 0
STM32MP>
STM32MP>
STM32MP> edit serverip
edit: 192.168.0.169
STM32MP> savee
Saving Environment to MMC... Writing to MMC(0)... OK
STM32MP> run net_nfs
ethernet@5800a000 Waiting for PHY auto negotiation to complete..... done
Using ethernet@5800a000 device
TFTP from server 192.168.0.169; our IP address is 192.168.0.89
Filename 'desk-mp1-l/uImage'.
Load address: 0xc2000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#######################
1.2 MiB/s
done
Bytes transferred = 8765832 (85c188 hex)
Using ethernet@5800a000 device
TFTP from server 192.168.0.169; our IP address is 192.168.0.89
Filename 'desk-mp1-l/stm32mp157a-dcsb5000dd1r.dtb'.
Load address: 0xc4000000
Loading: ############
915 KiB/s
done
Bytes transferred = 60967 (ee27 hex)
## Booting kernel from Legacy Image at c2000000 ...
Image Name: Linux-5.15.67-desk-mp1-l-1.0.0
Created: 2023-07-26 6:51:54 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 8765768 Bytes = 8.4 MiB
Load Address: c2000040
Entry Point: c2000040
Verifying Checksum ... OK
## Flattened Device Tree blob at c4000000
Booting using the fdt blob at 0xc4000000
XIP Kernel Image
Loading Device Tree to cffee000, end cffffe26 ... OK
ETZPC: 0x54003000 node disabled, decprot 7=0
ETZPC: 0x48001000 node disabled, decprot 89=2
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.67-desk-mp1-l-1.0.0 (jenkins@focalbakery) (arm-ostl-linux-gnueabi-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Jul 26 08:48:59 CEST 2023
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Dave desk-mp1 stm32mp157a-dcsb5000dd1r
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mcuram2@10000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10041000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0vring1@10041000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0buffer@10042000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x10048000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mcu_rsc_table@10048000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mcuram@30000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node retram@38000000, compatible id shared-dma-pool
[ 0.000000] cma: Reserved 128 MiB at 0xd8000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000c0000000-0x00000000dfffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000d3ffffff]
[ 0.000000] node 0: [mem 0x00000000d4000000-0x00000000d7ffffff]
[ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000dfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000c0000000-0x00000000dfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 17 pages/cpu s37004 r8192 d24436 u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.169:/home/dvdk/desk-mp1-l/rfs/desk-mp1-l,v3,tcp ip=192.168.0.89:192.168.0.169:192.168.0.254:255.255.255.0:etra:eth0:off panic=1 console=ttySTM0,115200
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 300948K/524288K available (13312K kernel code, 1379K rwdata, 3896K rodata, 1024K init, 218K bss, 92268K reserved, 131072K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000030] Switching to timer-based delay loop, resolution 41ns
[ 0.001201] Console: colour dummy device 80x30
[ 0.001272] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001305] pid_max: default: 32768 minimum: 301
[ 0.001622] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001660] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.003046] CPU: Testing write buffer coherency: ok
[ 0.003575] /cpus/cpu@0 missing clock-frequency property
[ 0.003646] /cpus/cpu@1 missing clock-frequency property
[ 0.003680] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005432] Setting up static identity map for 0xc0100000 - 0xc0100060
[ 0.005697] rcu: Hierarchical SRCU implementation.
[ 0.008145] smp: Bringing up secondary CPUs ...
[ 0.009536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009802] smp: Brought up 1 node, 2 CPUs
[ 0.009844] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.009862] CPU: All CPU(s) started in SVC mode.
[ 0.010838] devtmpfs: initialized
[ 0.032452] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.032864] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.032908] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.040445] pinctrl core: initialized pinctrl subsystem
[ 0.043161] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.046724] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.048623] thermal_sys: Registered thermal governor 'step_wise'
[ 0.049008] cpuidle: using governor menu
[ 0.049407] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.049438] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.049983] Serial: AMBA PL011 UART driver
[ 0.053265] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
[ 0.053322] stm32-pm-domain pm_domain: subdomain core-power-domain registered
[ 0.053343] stm32-pm-domain pm_domain: domains probed
[ 0.087761] platform panel-rgb@0: Fixing up cyclic dependency with 5a001000.display-controller
[ 0.106230] Kprobes globally optimized
[ 0.121810] SCSI subsystem initialized
[ 0.122791] usbcore: registered new interface driver usbfs
[ 0.122884] usbcore: registered new interface driver hub
[ 0.122968] usbcore: registered new device driver usb
[ 0.123377] pps_core: LinuxPPS API ver. 1 registered
[ 0.123399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.123439] PTP clock support registered
[ 0.123796] EDAC MC: Ver: 3.0.0
[ 0.125013] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 0.125132] arm-scmi firmware:scmi: SCMI Protocol v2.0 'ST:' Firmware version 0x0
[ 0.126577] Advanced Linux Sound Architecture Driver Initialized.
[ 0.127754] Bluetooth: Core ver 2.22
[ 0.127866] NET: Registered PF_BLUETOOTH protocol family
[ 0.127885] Bluetooth: HCI device and connection manager initialized
[ 0.127911] Bluetooth: HCI socket layer initialized
[ 0.127931] Bluetooth: L2CAP socket layer initialized
[ 0.127971] Bluetooth: SCO socket layer initialized
[ 0.129075] clocksource: Switched to clocksource arch_sys_counter
[ 0.222304] NET: Registered PF_INET protocol family
[ 0.222717] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.224423] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.224495] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.224524] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.224595] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.224699] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.224844] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.224901] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.225282] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.230164] RPC: Registered named UNIX socket transport module.
[ 0.230203] RPC: Registered udp transport module.
[ 0.230217] RPC: Registered tcp transport module.
[ 0.230230] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.232495] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.234675] Initialise system trusted keyrings
[ 0.235207] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.246806] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.248380] NFS: Registering the id_resolver key type
[ 0.248479] Key type id_resolver registered
[ 0.248498] Key type id_legacy registered
[ 0.248714] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.249020] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.250003] fuse: init (API version 7.34)
[ 0.395127] NET: Registered PF_ALG protocol family
[ 0.395171] Key type asymmetric registered
[ 0.395187] Asymmetric key parser 'x509' registered
[ 0.395381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.395407] io scheduler mq-deadline registered
[ 0.395422] io scheduler kyber registered
[ 0.405306] reg11: supplied by regulator-dummy
[ 0.405769] reg18: supplied by regulator-dummy
[ 0.406151] usb33: supplied by regulator-dummy
[ 0.411183] STM32 USART driver initialized
[ 0.434054] brd: module loaded
[ 0.445036] loop: module loaded
[ 0.454344] CAN device driver interface
[ 0.456688] pegasus: Pegasus/Pegasus II USB Ethernet driver
[ 0.456791] usbcore: registered new interface driver pegasus
[ 0.456877] usbcore: registered new interface driver asix
[ 0.456942] usbcore: registered new interface driver ax88179_178a
[ 0.457024] usbcore: registered new interface driver cdc_ether
[ 0.457107] usbcore: registered new interface driver smsc75xx
[ 0.457188] usbcore: registered new interface driver smsc95xx
[ 0.457253] usbcore: registered new interface driver net1080
[ 0.457320] usbcore: registered new interface driver cdc_subset
[ 0.457381] usbcore: registered new interface driver zaurus
[ 0.457557] usbcore: registered new interface driver cdc_ncm
[ 0.458877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.458938] ehci-platform: EHCI generic platform driver
[ 0.459309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.459354] ohci-platform: OHCI generic platform driver
[ 0.460175] usbcore: registered new interface driver cdc_acm
[ 0.460198] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.460313] usbcore: registered new interface driver usb-storage
[ 0.464732] i2c_dev: i2c /dev entries driver
[ 0.468648] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[ 0.468681] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
[ 0.470821] sdhci: Secure Digital Host Controller Interface driver
[ 0.470851] sdhci: Copyright(c) Pierre Ossman
[ 0.470864] Synopsys Designware Multimedia Card Interface Driver
[ 0.471385] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.472651] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.472763] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 0.473021] SMCCC: SOC_ID: ID = jep106:0020:0500 Revision = 0x00002000
[ 0.473965] hid: raw HID events driver (C) Jiri Kosina
[ 0.474246] usbcore: registered new interface driver usbhid
[ 0.474267] usbhid: USB HID core driver
[ 0.483142] NET: Registered PF_PACKET protocol family
[ 0.483200] can: controller area network core
[ 0.483333] NET: Registered PF_CAN protocol family
[ 0.483355] can: raw protocol
[ 0.483373] can: broadcast manager protocol
[ 0.483394] can: netlink gateway - max_hops=1
[ 0.483851] Bluetooth: RFCOMM TTY layer initialized
[ 0.483897] Bluetooth: RFCOMM socket layer initialized
[ 0.483951] Bluetooth: RFCOMM ver 1.11
[ 0.484429] lib80211: common routines for IEEE802.11 drivers
[ 0.484965] Key type dns_resolver registered
[ 0.485104] ThumbEE CPU extension supported.
[ 0.485138] Registering SWP/SWPB emulation handler
[ 0.485634] registered taskstats version 1
[ 0.485669] Loading compiled-in X.509 certificates
[ 0.525316] stm32-mdma 58000000.dma-controller: STM32 MDMA driver registered
[ 0.528679] stm32-dma 48000000.dma-controller: no dma pool: can't use MDMA: 0
[ 0.530588] stm32-dma 48000000.dma-controller: STM32 DMA driver registered
[ 0.549548] stm_thermal 50028000.thermal: stm_thermal_probe: Driver initialized successfully
[ 0.556571] /soc/interrupt-controller@5000d000: bank0
[ 0.556627] /soc/interrupt-controller@5000d000: bank1
[ 0.556658] /soc/interrupt-controller@5000d000: bank2
[ 0.558652] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOA bank added
[ 0.559604] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOB bank added
[ 0.560374] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOC bank added
[ 0.561133] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOD bank added
[ 0.561852] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOE bank added
[ 0.562533] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOF bank added
[ 0.563284] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOG bank added
[ 0.563966] stm32mp157-pinctrl soc:pinctrl@50002000: GPIOH bank added
[ 0.564049] stm32mp157-pinctrl soc:pinctrl@50002000: Pinctrl STM32 initialized
[ 0.565018] stm32mp157-pinctrl soc:pinctrl@54004000: at least one GPIO bank is required
[ 0.565051] stm32mp157-pinctrl: probe of soc:pinctrl@54004000 failed with error -22
[ 0.566995] LCD_5V: supplied by vin
[ 0.567757] wlan-en-regulator: supplied by vin
[ 0.571816] stm32-usart 4000f000.serial: interrupt mode for rx (no dma)
[ 0.571855] stm32-usart 4000f000.serial: interrupt mode for tx (no dma)
[ 0.571893] 4000f000.serial: ttySTM1 at MMIO 0x4000f000 (irq = 49, base_baud = 4000000) is a stm32-usart
[ 0.574102] stm32-usart 40010000.serial: interrupt mode for rx (no dma)
[ 0.574137] stm32-usart 40010000.serial: interrupt mode for tx (no dma)
[ 0.574175] 40010000.serial: ttySTM0 at MMIO 0x40010000 (irq = 50, base_baud = 4000000) is a stm32-usart
[ 1.876693] printk: console [ttySTM0] enabled
[ 1.883384] stm32-usart 40018000.serial: interrupt mode for rx (no dma)
[ 1.888580] stm32-usart 40018000.serial: interrupt mode for tx (no dma)
[ 1.895372] 40018000.serial: ttySTM3 at MMIO 0x40018000 (irq = 51, base_baud = 4000000) is a stm32-usart
[ 1.906972] stm32-usart 40019000.serial: interrupt mode for rx (no dma)
[ 1.912252] stm32-usart 40019000.serial: interrupt mode for tx (no dma)
[ 1.918854] 40019000.serial: ttySTM2 at MMIO 0x40019000 (irq = 52, base_baud = 4000000) is a stm32-usart
[ 1.934966] stm32-dwmac 5800a000.ethernet: IRQ eth_lpi not found
[ 1.940786] stm32-dwmac 5800a000.ethernet: User ID: 0x40, Synopsys ID: 0x42
[ 1.946602] stm32-dwmac 5800a000.ethernet: DWMAC4/5
[ 1.951618] stm32-dwmac 5800a000.ethernet: DMA HW capability register supported
[ 1.958909] stm32-dwmac 5800a000.ethernet: RX Checksum Offload Engine supported
[ 1.966231] stm32-dwmac 5800a000.ethernet: TX Checksum insertion supported
[ 1.973137] stm32-dwmac 5800a000.ethernet: Wake-Up On Lan supported
[ 1.979571] stm32-dwmac 5800a000.ethernet: TSO supported
[ 1.984744] stm32-dwmac 5800a000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.992573] stm32-dwmac 5800a000.ethernet: device MAC address 0a:7f:53:9f:1a:77
[ 1.999893] stm32-dwmac 5800a000.ethernet: Enabled L3L4 Flow TC (entries=2)
[ 2.006881] stm32-dwmac 5800a000.ethernet: Enabled RFS Flow TC (entries=8)
[ 2.013829] stm32-dwmac 5800a000.ethernet: TSO feature enabled
[ 2.019637] stm32-dwmac 5800a000.ethernet: Using 32 bits DMA width
[ 2.034230] stm32_rtc 5c004000.rtc: registered as rtc0
[ 2.038053] stm32_rtc 5c004000.rtc: setting system clock to 2000-01-01T00:00:29 UTC (946684829)
[ 2.047401] stm32_rtc 5c004000.rtc: Date/Time must be initialized
[ 2.052874] stm32_rtc 5c004000.rtc: registered rev:1.2
[ 2.078617] stm32f7-i2c 40015000.i2c: using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers
[ 2.086833] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[ 2.117717] stpmic1 1-0033: PMIC Chip Version: 0x21
[ 2.126328] vddcore: supplied by vin
[ 2.131599] vdd_ddr: supplied by vin
[ 2.136721] vdd: supplied by vin
[ 2.141565] v3v3: supplied by vin
[ 2.146472] v1v8_audio: supplied by v3v3
[ 2.153323] v3v3_hdmi: supplied by vin
[ 2.159381] vtt_ddr: supplied by vdd_ddr
[ 2.164720] vdd_usb: supplied by vin
[ 2.170470] vdda: supplied by vin
[ 2.175914] v1v2_hdmi: supplied by v3v3
[ 2.181586] vref_ddr: supplied by vin
[ 2.187238] bst_out: supplied by vin
[ 2.190390] vbus_otg: supplied by bst_out
[ 2.194352] vbus_sw: supplied by bst_out
[ 2.203933] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 2.211164] rtc-ds3232 1-0068: registered as rtc1
[ 2.215372] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-1 bus adapter
[ 2.222556] i2c i2c-0: Added multiplexed i2c bus 2
[ 2.226036] i2c-mux-gpio i2cmux: 1 port mux on STM32F7 I2C(0x40015000) adapter
[ 2.238182] mmci-pl18x 48004000.mmc: mmc0: PL180 manf 53 rev2 at 0x48004000 irq 38,0 (pio)
[ 2.437741] mmci-pl18x 58005000.mmc: Got CD GPIO
[ 2.442335] mmci-pl18x 58005000.mmc: mmc1: PL180 manf 53 rev2 at 0x58005000 irq 42,0 (pio)
[ 2.467897] mmc0: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes)
[ 2.480403] mmci-pl18x 58007000.mmc: mmc2: PL180 manf 53 rev2 at 0x58007000 irq 43,0 (pio)
[ 2.488797] mmc0: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes)
[ 2.498312] mmc0: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes)
[ 2.505375] mmc0: queuing unknown CIS tuple 0x14 [] (0 bytes)
[ 2.518285] mmc0: new high speed SDIO card at address 0001
[ 2.524170] mmc1: new high speed SDHC card at address 59b4
[ 2.528525] stm32-ipcc 4c001000.mailbox: ipcc rev:1.0 enabled, 6 chans, proc 0
[ 2.538317] mmcblk1: mmc1:59b4 USDU1 14.9 GiB
[ 2.542967] stm32-rproc 10000000.m4: IRQ index 0 not found
[ 2.548806] remoteproc remoteproc0: m4 is available
[ 2.555924] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
[ 2.561309] rfkill_gpio bt_rfkill: bt_rfkill device registered.
[ 2.572955] LCD_VDD: supplied by vdd
[ 2.575854] TOUCH_VDD: supplied by vdd
[ 2.581775] stm32-usbphyc 5a006000.usbphyc: registered rev:1.0
[ 2.594873] dwc2 49000000.usb-otg: supply vusb_d not found, using dummy regulator
[ 2.601351] dwc2 49000000.usb-otg: supply vusb_a not found, using dummy regulator
[ 2.616961] mmc2: new DDR MMC card at address 0001
[ 2.621840] mmcblk2: mmc2:0001 W62704 3.53 GiB
[ 2.631363] mmcblk2boot0: mmc2:0001 W62704 2.00 MiB
[ 2.638100] mmcblk2boot1: mmc2:0001 W62704 2.00 MiB
[ 2.644545] mmcblk2rpmb: mmc2:0001 W62704 512 KiB, chardev (240:0)
[ 2.746682] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
[ 2.753845] dwc2 49000000.usb-otg: DWC OTG Controller
[ 2.757856] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 1
[ 2.765325] dwc2 49000000.usb-otg: irq 74, io mem 0x49000000
[ 2.777575] hub 1-0:1.0: USB hub found
[ 2.780050] hub 1-0:1.0: 1 port detected
[ 2.789196] ehci-platform 5800d000.usb: EHCI Host Controller
[ 2.793527] ehci-platform 5800d000.usb: new USB bus registered, assigned bus number 2
[ 2.802069] ehci-platform 5800d000.usb: irq 75, io mem 0x5800d000
[ 2.829166] ehci-platform 5800d000.usb: USB 2.0 started, EHCI 1.00
[ 2.835387] hub 2-0:1.0: USB hub found
[ 2.837820] hub 2-0:1.0: 2 ports detected
[ 2.843655] ohci-platform 5800c000.usb: Generic Platform OHCI controller
[ 2.848982] ohci-platform 5800c000.usb: new USB bus registered, assigned bus number 3
[ 2.857389] ohci-platform 5800c000.usb: irq 45, io mem 0x5800c000
[ 2.934566] hub 3-0:1.0: USB hub found
[ 2.937003] hub 3-0:1.0: 2 ports detected
[ 2.944293] input: pmic_onkey as /devices/platform/soc/5c002000.i2c/i2c-1/1-0033/5c002000.i2c:stpmic@33:onkey/input/input0
[ 2.959781] [drm] Initialized stm 1.0.0 20170330 for 5a001000.display-controller on minor 0
[ 3.008138] Console: switching to colour frame buffer device 100x30
[ 3.030009] stm32-display 5a001000.display-controller: [drm] fb0: stmdrmfb frame buffer device
[ 3.122904] stm32-dwmac 5800a000.ethernet eth0: PHY [stmmac-0:00] driver [Micrel KSZ8081 or KSZ8091] (irq=POLL)
[ 3.132530] stm32-dwmac 5800a000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 3.150511] dwmac4: Master AXI performs any burst length
[ 3.154398] stm32-dwmac 5800a000.ethernet eth0: No Safety Features support found
[ 3.162079] stm32-dwmac 5800a000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 3.170642] stm32-dwmac 5800a000.ethernet eth0: registered PTP clock
[ 3.177562] stm32-dwmac 5800a000.ethernet eth0: configuring for phy/rmii link mode
[ 3.419113] usb 1-1: new full-speed USB device number 2 using dwc2
[ 3.687148] input: ILITEK ILITEK-TP as /devices/platform/soc/49000000.usb-otg/usb1/1-1/1-1:1.0/0003:222A:0001.0001/input/input1
[ 3.698097] hid-multitouch 0003:222A:0001.0001: input,hidraw0: USB HID v1.10 Device [ILITEK ILITEK-TP] on usb-49000000.usb-otg-1/input0
[ 3.713869] input: ILITEK ILITEK-TP Mouse as /devices/platform/soc/49000000.usb-otg/usb1/1-1/1-1:1.1/0003:222A:0001.0002/input/input2
[ 3.725526] hid-generic 0003:222A:0001.0002: input,hidraw1: USB HID v1.10 Mouse [ILITEK ILITEK-TP] on usb-49000000.usb-otg-1/input1
[ 6.320796] stm32-dwmac 5800a000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 6.359106] IP-Config: Complete:
[ 6.360954] device=eth0, hwaddr=0a:7f:53:9f:1a:77, ipaddr=192.168.0.89, mask=255.255.255.0, gw=192.168.0.254
[ 6.371211] host=etra, domain=, nis-domain=(none)
[ 6.376377] bootserver=192.168.0.169, rootserver=192.168.0.169, rootpath=
[ 6.376828] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.396413] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.401928] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.409626] ALSA device list:
[ 6.410396] cfg80211: failed to load regulatory.db
[ 6.413189] No soundcards found.
[ 6.465895] VFS: Mounted root (nfs filesystem) on device 0:17.
[ 6.473236] devtmpfs: mounted
[ 6.476923] Freeing unused kernel image (initmem) memory: 1024K
[ 6.509601] Run /sbin/init as init process
[ 7.164993] systemd[1]: System time before build time, advancing clock.
[ 8.858278] NET: Registered PF_INET6 protocol family
[ 9.036621] Segment Routing with IPv6
[ 9.038976] In-situ OAM (IOAM) with IPv6
[ 9.249571] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 9.281000] systemd[1]: Detected architecture arm.
Welcome to ST OpenSTLinux - Weston - (A Yocto Project Based Distro) 4.0.4-snapshot-20230408 (kirkstone)!
[ 9.515713] systemd[1]: Hostname set to <desk-mp1>.
[ 9.537741] systemd[1]: Initializing machine ID from random generator.
[ 9.656925] systemd[1]: Using hardware watchdog 'Software Watchdog', version 0, device /dev/watchdog0
[ 9.664999] systemd[1]: Watchdog running with a timeout of 32s.
[ 14.233967] systemd[1]: /lib/systemd/system/mount-partitions.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 14.289772] systemd[1]: Queued start job for default target Multi-User System.
[ 14.368558] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 14.413806] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 14.463714] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 14.503013] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 14.540207] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 14.580065] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 14.620176] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 14.659576] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 14.699515] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 14.729577] systemd[1]: Reached target Swaps.
[ OK ] Reached target Swaps.
[ 14.798763] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 14.839771] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 14.883395] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 14.949848] systemd[1]: Listening on Process Core Dump Socket.
[ OK ] Listening on Process Core Dump Socket.
[ 14.990227] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 15.075919] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[ 15.089365] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 15.131121] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 15.173872] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 15.216743] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 15.250605] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 15.293212] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 15.330842] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 15.351178] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 15.398093] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 15.437485] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 15.486853] systemd[1]: Mounting Temporary Directory /tmp...
Mounting Temporary Directory /tmp...
[ 15.532023] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 15.578425] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 15.618035] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 15.658288] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 15.708218] systemd[1]: Starting Mount partitions...
Starting Mount partitions...
[ 15.754965] systemd[1]: Starting RPC Bind...
Starting RPC Bind...
[ 15.792506] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 15.829805] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 15.909746] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
[ 15.940986] systemd[1]: Mounting NFSD configuration filesystem...
Mounting NFSD configuration filesystem...
[ 16.021919] systemd[1]: Starting Generate network units from Kernel command line...
Starting Generate network …ts from Kernel command line...
[ 16.071364] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 16.125471] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 16.170783] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 16.349626] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ 16.398954] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 16.418574] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 16.462920] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 16.500812] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted Temporary Directory /tmp.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Mount partitions.
[FAILED] Failed to mount NFSD configuration filesystem.
See 'systemctl status proc-fs-nfsd.mount' for details.
[DEPEND] Dependency failed for NFS server and services.
[DEPEND] Dependency failed for NFS Mount Daemon.
[ OK ] Finished Generate network units from Kernel command line.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished Apply Kernel Variables.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
[ OK ] Started Starts Psplash Boot screen.
Starting Resize root files…to fit available disk space...
Starting Flush Journal to Persistent Storage...
Starting Create System Users...
[ 17.391122] systemd-journald[593]: Received client request to flush runtime journal.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /var/volatile...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Mounted /var/volatile.
Starting Wait for udev To …plete Device Initialization...
Starting Load/Save Random Seed...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ 18.986106] random: crng init done
[ OK ] Finished Load/Save Random Seed.
[ OK ] Created slice Slice /system/systemd-backlight.
Starting Load/Save Screen …ness of backlight:backlight...
[ OK ] Finished Load/Save Screen …htness of backlight:backlight.
[ 21.174007] galcore: loading out-of-tree module taints kernel.
[ 21.392716] Galcore version 6.4.9.436021
[ 21.882137] using random self ethernet address
[ 21.907565] using random host ethernet address
[ 22.401105] usb0: HOST MAC 5c:c0:78:d3:5c:60
[ 22.403995] usb0: MAC 76:b2:0b:ea:da:0d
[ 22.407910] dwc2 49000000.usb-otg: bound driver configfs-gadget
[ OK ] Reached target Hardware activated USB gadget.
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Finished Wait for udev To Complete Device Initialization.
[ OK ] Finished Resize root files…m to fit available disk space.
[ OK ] Reached target Local File Systems.
Starting Rebuild Dynamic Linker Cache...
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
[FAILED] Failed to start Hardware RNG Entropy Gatherer Daemon.
See 'systemctl status rngd.service' for details.
Starting Rebuild Journal Catalog...
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Reached target System Time Set.
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Stopped Network Time Synchronization.
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Stopped Network Time Synchronization.
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Finished Rebuild Journal Catalog.
[ OK ] Stopped Network Time Synchronization.
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Stopped Network Time Synchronization.
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Stopped Network Time Synchronization.
[FAILED] Failed to start Network Time Synchronization.
See 'systemctl status systemd-timesyncd.service' for details.
[ OK ] Finished Rebuild Dynamic Linker Cache.
Starting Update is Completed...
[ OK ] Finished Update is Completed.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timer Units.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on dropbear.socket.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
[ OK ] Started Job spooling tools.
[ OK ] Started Periodic Command Scheduler.
Starting D-Bus System Message Bus...
Starting IPv6 Packet Filtering Framework...
Starting IPv4 Packet Filtering Framework...
Starting Hold until boot process finishes up...
[ OK ] Started System Logging Service.
Starting Resets System Activity Logs...
syslogd[805]: Error opening log file: /var/log/auth.log: No such file or directory
syslogd[805]: Error opening log file: /var/log/syslog: No such file or directory
syslogd[805]: Error opening log file: /var/log/kern.log: No such file or directory
syslogd[805]: Error opening log file: /var/log/mail.log: No such file or directory
[FAILED] Failed to start User Login Management.
See 'systemctl status systemd-logind.service' for details.
syslogd[805]: Error opening log file: /var/log/mail.err: No such file or directory
Starting Userfs cleanup package...
syslogd[805]: Error opening log file: /var/log/messages: No such file or directory
[ OK ] Finished IPv6 Packet Filtering Framework.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Finished IPv4 Packet Filtering Framework.
[ OK ] Finished Hold until boot process finishes up.
[FAILED] Failed to start Resets System Activity Logs.
See 'systemctl status sysstat.service' for details.
[ OK ] Reached target Preparation for Network.
[ OK ] Stopped User Login Management.
Starting Load Kernel Module drm...
Starting Network Configuration...
Starting Check if the gpu …orrect weston configuration...
[ OK ] Finished Load Kernel Module drm.
[FAILED] Failed to start User Login Management.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped User Login Management.
Starting Load Kernel Module drm...
[ OK ] Finished Load Kernel Module drm.
[FAILED] Failed to start User Login Management.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped User Login Management.
Starting Load Kernel Module drm...
[ OK ] Finished Load Kernel Module drm.
[FAILED] Failed to start User Login Management.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped User Login Management.
Starting Load Kernel Module drm...
[ OK ] Finished Check if the gpu … correct weston configuration.
[ OK ] Started Network Configuration.
[ OK ] Finished Load Kernel Module drm.
[FAILED] Failed to start User Login Management.
See 'systemctl status systemd-logind.service' for details.
[FAILED] Failed to start Network Name Resolution.
See 'systemctl status systemd-resolved.service' for details.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started IIO Daemon.
Starting Real time performance monitoring...
[ OK ] Started NFS status monitor for NFSv2/3 locking..
[FAILED] Failed to start Respond to IPv6 Node Information Queries.
See 'systemctl status ninfod.service' for details.
[FAILED] Failed to start Network Router Discovery Daemon.
See 'systemctl status rdisc.service' for details.
Starting Permit User Sessions...
Starting Target Communication Framework agent...
[ OK ] Started Xinetd A Powerful Replacement For Inetd.
[FAILED] Failed to start Real time performance monitoring.
See 'systemctl status netdata.service' for details.
[ OK ] Finished Permit User Sessions.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Target Communication Framework agent.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttySTM0.
[ OK ] Reached target Login Prompts.
[ OK ] Stopped User Login Management.
Starting Load Kernel Module drm...
[ OK ] Stopped Network Name Resolution.
[FAILED] Failed to start Network Name Resolution.
See 'systemctl status systemd-resolved.service' for details.
[ OK ] Started Weston, a Wayland …mpositor, as a system service.
[ OK ] Finished Load Kernel Module drm.
[FAILED] Failed to start User Login Management.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped Network Name Resolution.
[FAILED] Failed to start Network Name Resolution.
See 'systemctl status systemd-resolved.service' for details.
[ OK ] Stopped Network Name Resolution.
[FAILED] Failed to start Network Name Resolution.
See 'systemctl status systemd-resolved.service' for details.
[ OK ] Stopped Network Name Resolution.
[FAILED] Failed to start Network Name Resolution.
See 'systemctl status systemd-resolved.service' for details.
Starting User Database Manager...
[ OK ] Stopped Network Name Resolution.
[FAILED] Failed to start Network Name Resolution.
See 'systemctl status systemd-resolved.service' for details.
[ OK ] Started User Database Manager.
ST OpenSTLinux - Weston - (A Yocto Project Based Distro) 4.0.4-snapshot desk-mp1 ttySTM0
desk-mp1 login: root (automatic login)
alias: gawkpath_default not found
alias: gawkpath_prepend not found
alias: gawkpath_append not found
alias: gawklibpath_default not found
alias: gawklibpath_prepend not found
alias: gawklibpath_append not found
root@desk-mp1:~# ls -l /lib/modules/$(uname -r)
total 812
lrwxrwxrwx 1 541 502 63 Jul 26 2023 build -> /home/jenkins/workspace/workspace/DESK-MP1-L-1.x.x_Linux-kernel
drwxr-xr-x 2 541 502 4096 Jul 26 2023 extra
drwxr-xr-x 10 541 502 4096 Jul 26 2023 kernel
-rw-r--r-- 1 541 502 91303 Jul 26 2023 modules.alias
-rw-r--r-- 1 541 502 105556 Jul 26 2023 modules.alias.bin
-rw-r--r-- 1 541 502 21761 Jul 26 2023 modules.builtin
-rw-r--r-- 1 541 502 45829 Jul 26 2023 modules.builtin.alias.bin
-rw-r--r-- 1 541 502 24366 Jul 26 2023 modules.builtin.bin
-rw-r--r-- 1 541 502 137570 Jul 26 2023 modules.builtin.modinfo
-rw-r--r-- 1 541 502 54201 Jul 26 2023 modules.dep
-rw-r--r-- 1 541 502 85427 Jul 26 2023 modules.dep.bin
-rw-r--r-- 1 541 502 94 Jul 26 2023 modules.devname
-rw-r--r-- 1 541 502 26264 Jul 26 2023 modules.order
-rw-r--r-- 1 541 502 190 Jul 26 2023 modules.softdep
-rw-r--r-- 1 541 502 84407 Jul 26 2023 modules.symbols
-rw-r--r-- 1 541 502 108328 Jul 26 2023 modules.symbols.bin
lrwxrwxrwx 1 541 502 63 Jul 26 2023 source -> /home/jenkins/workspace/workspace/DESK-MP1-L-1.x.x_Linux-kernel
root@desk-mp1:~#
QT5 App[edit | edit source]
To run QT5 applications in the target after booting via NFS it is first necessary to set the environment correctly, to do this you need to execute these 2 commands:
/etc/profile.d/qt-wayland.shexport XDG_RUNTIME_DIR=/home/weston
