DESK-MX8M-L/General/ConfigID
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| First DESK-MX8M-L release | |||
| DESK-MX8M-L-2.0.0 release | |||
| 2024/05/30 | DESK-MX8M-L-4.x.x release | ||
ConfigID[edit | edit source]
This article describes how the ConfigID is implemented in the products supported by the DESK-MX8M-L Linux Kit.
Moreover, a system is composed of the combination of a SOM and a carrier board. In this case, two ConfigIDs are used to identify the actual board configuration like it was a SOM+carrier board system.
For the sake of simplicity, the first ConfigID is denoted as SOM ConfigID, while the second one is denoted as CB ConfigID:
MITO 8M Mini[edit | edit source]
As MITO 8M Mini is a system-on-module (SOM), the typical mechanism described here is used.
... SOM ConfigID#: 00000002 SOM UniqueID#: e317318f:1b1229d4 CB ConfigID#: 0000100a CB UniqueID#: fb000030:4d8eea2d Board: MX8MM-Mito8MMini on SBCX ...
ORCA[edit | edit source]
As ORCA is a system-on-module (SOM), the typical mechanism described here is used.
... SOM ConfigID#: 00000005 SOM UniqueID#: 0002aaff:8aefcecd CB ConfigID#: 00001001 CB UniqueID#: da000011:0dd2e72d Board: MX8MP-Mito8MPlus on SBC ORCA ...
Generally speaking[edit | edit source]
- SOM ConfigID is used to identify the configuration of the basic features of the SOM
- CB ConfigID is used to identify the peripherals and the I/O interfaces.
 NXP silicon manufacturer guarantees that processors UIDs (a.k.a. SOM UniqueID# on DESK-MX8M-L) to be unique over the whole MX8M family |
