Category:Bora
Revision as of 10:43, 16 July 2013 by DevWikiAdmin (talk | contribs) (Created page with "= Bora Xilinx ZYNQ XC7Z010/XC7Z020 CPU module = 200px|frameless|border == Main Features == For detailed information about Bora, please refer to the...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Bora Xilinx ZYNQ XC7Z010/XC7Z020 CPU moduleEdit
Main FeaturesEdit
For detailed information about Bora, please refer to the Bora SOM article.
Bora RSS FeedEdit
Please refer to the Keeping updated on Dave Developer's wiki pages modifications section for further information on how to subscribe to the RSS feed.
Dido Product PageEdit
Please visit Bora Web Page for more product information.
Bora LeafletEdit
Please download it from the following link: [1]
This category collects all the pages specific to Dido modules and related carrier boards.
Pages in category "Bora"
The following 63 pages are in this category, out of 63 total.
A
B
- BELK-AN-001: Asymmetric Multiprocessing (AMP) on Bora – Linux FreeRTOS
- BELK-AN-002: Trace on the Bora AMP (Linux + FreeRTOS) system
- BELK-AN-003: Interfacing DDR3 SDRAM to PL
- BELK-AN-004: Interfacing BoraEVB/BoraXEVB to TFT LCD display
- BELK-AN-006: Enabling dual Gigabit Ethernet support on BoraEVB/BoraXEVB
- BELK-AN-007: Asymmetric Multiprocessing (AMP) on Bora/BoraX with OpenAMP
- BELK-AN-008: Programming the FPGA Bitstream with U-Boot
- BELK-AN-009: Using Visual Studio Code for remote debugging
- BELK-AN-010: NAND performances
- BELK-TN-001: Real-timeness, system integrity and TrustZone® technology on AMP configuration
- BELK-TN-003: Video processing and hardware/software partitioning
- BELK-TN-004: Managing both Ethernet ports with U-Boot (BoraEVB/BoraXEVB)
- BELK-TN-005: Running PYNQ on Bora
- BELK-TN-006: Using PetaLinux to Build BELK/BXELK Software Components
- BELK-TN-008: Integrating Visual Studio Code and Lauterbach PowerView TRACE32
- BELK-TN-009: Integrating Visual Studio Code with a cross-toolchain
- BELK-TN-010: MAC address programming on OTP
- BELK-TN-011: Lock OTP Areas
- BELK-TN-012: Using XADC signal module
- BELK-TN-013: Managing ethernet and USB physical transceivers reset
- BELK-WP-001: Xilinx Zynq-7000 Errata management
- BELK/BXELK Quick Start Guide
- BELK/BXELK software components
- Booting Linux Kernel
- Booting the system via NFS (BELK/BXELK)
- BELK-AN-005: Interfacing BoraEVB to thin film electroluminescent display
- Bora Embedded Linux Kit (BELK)
- BoraEVB
- Build system (BELK/BXELK)
- Building Linux kernel (BELK/BXELK)
- Building the Yocto BSP (BELK/BXELK)
- Building U-Boot (BELK/BXELK)