Bora Embedded Linux Kit (BELK)

Info Box Applies to Bora

---

	THIS PAGE IS OBSOLETE, DON'T USE IT AS REFERENCE
The new documentation is available here: DESK-XZ7-L

For BELK 3.0.2 or older, the boot process was based on the FSBL+second-stage bootloader (U-Boot) combination. From BELK 4.0.0 on, the boot process is based on the first-stage bootloader (U-Boot SPL)+second-stage bootloader (U-Boot) combination.

Contents

UnboxingEdit

Bora Embedded Linux Kit (BELK for short) provides all the necessary components required to set up the developing environment for:

• building the first-stage bootloader:
  • FSBL for BELK 3.0.2 or older
  • U-boot SPL for BELK 4.0.0 or newer
• building the second-stage bootloader (U-Boot)
• building and running Linux operating system on Bora-based systems
• building Linux applications that will run on the target.

DAVE Embedded Systems provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers to use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system.

Kit contentsEdit

Component	Description	Notes
	Bora SOM Default option is DBRF4110S2R (see Order codes for more options) SoC: Xilinx XC7Z020 (866Mhz, Speed "-3", Tj 0-100°C) SDRAM: 1 GB DDR3 NOR: bootable SPI flash 16 MB NAND: 1GB (SLC)	For more details, please refer to the Bora Hardware Manual By default, ARM cores frequency is set to 667 MHz and the example Vivado project is implemented for a "-1" device. This choice makes the software released with the kit compatible with possible variants based on different SoM models. In this regard, see also the order codes section.
	BORA Carrier board	Se also the BoraEVB page
	AC/DC Single Output Wall Mount adapter Output: +12V – 2.0 A	Please refer to Belk Quick Start Guide
	FTDI USB/RS232 cable adapter	FTDI code: CHIPI-X10
	D9 Female to D9 Female null modem cable
	MicroSDHC card

Order codesEdit

Order code	Description
BELK-L-S-S	This code refers to the default configuration detailed above

Logical structure of Bora Embedded Linux Kit (BELK)Edit

Please refer to this page.

BELK software componentsEdit

Please refer to this page.

Quick start guideEdit

Please refer to this page.

Physical devices mappingEdit

Please refer to this page.

Advanced topicsEdit

Debugging with EclipseEdit

Please refer to this page.

ConfigID featureEdit

Please refer to this page.

Related DocumentsEdit

• Bora Hardware Manual
• BoraEVB-Lite
• BORAEVB
• BELK/BXELK Quick Start Guide
• BORA FAQs