BORA SOM/BORA Evaluation Kit/Getting started/Kit Contents

From DAVE Developer's Wiki
< BORA SOM‎ | BORA Evaluation Kit
Revision as of 10:48, 28 October 2021 by U0007 (talk | contribs) (Created page with "<section begin=Body/> {{#lst:Bora_Embedded_Linux_Kit_(BELK)|Kit Content}} <section end=Body/>")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services


Kit contents[edit | edit source]

Component Description Notes
Bora5-small.jpg Bora SOM

Default option is DBRF4110S2R (see Order codes for more options)

  • SoC: Xilinx XC7Z020 (866Mhz, Speed "-3", Tj 0-100°C)
  • SDRAM: 1 GB DDR3
  • NOR: bootable SPI flash 16 MB
  • NAND: 1GB (SLC)
  • For more details, please refer to the Bora Hardware Manual
  • By default, ARM cores frequency is set to 667 MHz and the example Vivado project is implemented for a "-1" device. This choice makes the software released with the kit compatible with possible variants based on different SoM models. In this regard, see also the order codes section.
Boraevb-02.png BORA Carrier board Se also the BoraEVB page
Alimentatore.jpg AC/DC Single Output Wall Mount adapter
Output: +12V – 2.0 A 		Please refer to Belk Quick Start Guide
FTDI-CHIPI-X10.png
 FTDI USB/RS232 cable adapter
 FTDI code: CHIPI-X10
EVK-kit-DB9-serial-cable.png.png
 D9 Female to D9 Female null modem cable
Sandisk Industrial 32GB.png
 MicroSDHC card

Order codes[edit | edit source]

Order code Description
BELK-L-S-S This code refers to the default configuration detailed above


HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services
Retrieved from "https://wiki.dave.eu/index.php?title=BORA_SOM/BORA_Evaluation_Kit/Getting_started/Kit_Contents&oldid=14986"