Bora Embedded Linux Kit (BELK)

Info Box Applies to Bora

Contents

IntroductionEdit

Bora Embedded Linux Kit (BELK for short) provides all the necessary components required to set up the developing environment for:

• configuring the system (PS and PL) at hardware level
• build the first-stage bootloader (FSBL)
• building the second stage bootloader (U-Boot)
• building and running Linux operating system on Bora-based systems
• building Linux applications that will run on the target

DAVE Embedded Systems provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system.

Kit contentEdit

Component	Description	Notes
	BORA SOM CPU: Xilinx Zynx 7000	Please refer to Bora Hardware Manual
	BORA Carrier board	Please refer to BoraEVB page
	AC/DC Single Output Wall Mount adapter Output: +12V – 2.0 A	Please refer to Belk Quick Start Guide
	MicroSDHC card with SD adapter and USB adapter	Please refer to Belk Quick Start Guide

Logical structure of Bora Embedded Linux Kit (BELK)Edit

Please refer to this page.

BELK software componentsEdit

Please refer to this page.

Related DocumentsEdit

• Bora Hardware Manual
• BoraEVB-Lite
• BORAEVB
• BELK Quick Start Guide
• Application Notes
• BORA FAQs