Difference between revisions of "Bora Embedded Linux Kit (BELK)"
(→Quick start guide) |
|||
| Line 2: | Line 2: | ||
{{Applies To Bora}} | {{Applies To Bora}} | ||
{{InfoBoxBottom}} | {{InfoBoxBottom}} | ||
| + | |||
| + | {{ImportantMessage|text=For BELK 3.0.2 or older, the boot process was based on the FSBL+second-stage bootloader (U-Boot) combination. From BELK 4.0.0 on, the boot process is based on the first-stage bootloader (U-Boot SPL)+second-stage bootloader (U-Boot) combination. | ||
| + | }} | ||
| + | |||
==Introduction== | ==Introduction== | ||
| Line 8: | Line 12: | ||
Bora Embedded Linux Kit (BELK for short) provides all the necessary components required to set up the developing environment for: | Bora Embedded Linux Kit (BELK for short) provides all the necessary components required to set up the developing environment for: | ||
| − | * | + | * building the first-stage bootloader: |
| − | + | ** FSBL for BELK 3.0.2 or older | |
| − | ** FSBL for | + | ** U-boot SPL for BELK 4.0.0 or newer |
| − | ** U-boot SPL | + | * building the second-stage bootloader (U-Boot) |
| − | * building the second stage bootloader (U-Boot) | ||
* building and running Linux operating system on Bora-based systems | * building and running Linux operating system on Bora-based systems | ||
| − | * building Linux applications that will run on the target | + | * building Linux applications that will run on the target. |
| − | '''DAVE Embedded Systems''' provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system. | + | '''DAVE Embedded Systems''' provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers to use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system. |
==Kit content== | ==Kit content== | ||
Revision as of 14:05, 3 July 2017
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
 For BELK 3.0.2 or older, the boot process was based on the FSBL+second-stage bootloader (U-Boot) combination. From BELK 4.0.0 on, the boot process is based on the first-stage bootloader (U-Boot SPL)+second-stage bootloader (U-Boot) combination. |
Contents
Introduction[edit | edit source]
Bora Embedded Linux Kit (BELK for short) provides all the necessary components required to set up the developing environment for:
- building the first-stage bootloader:
- FSBL for BELK 3.0.2 or older
- U-boot SPL for BELK 4.0.0 or newer
- building the second-stage bootloader (U-Boot)
- building and running Linux operating system on Bora-based systems
- building Linux applications that will run on the target.
DAVE Embedded Systems provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers to use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system.
Kit content[edit | edit source]
| Component | Description | Notes |
|---|---|---|
|
BORA SOM CPU: Xilinx Zynx 7000 |
Please refer to Bora Hardware Manual |
|
BORA Carrier board | Please refer to BoraEVB page |
|
AC/DC Single Output Wall Mount adapter Output: +12V – 2.0 A |
Please refer to Belk Quick Start Guide |
|
MicroSDHC card with SD adapter and USB adapter | Please refer to Belk Quick Start Guide |
Logical structure of Bora Embedded Linux Kit (BELK)[edit | edit source]
Please refer to this page.
BELK software components[edit | edit source]
Please refer to this page.
Quick start guide[edit | edit source]
Please refer to this page.
