BORA Xpress SOM/BORA Xpress Evaluation Kit/Getting started/Unboxing

History
Issue Date	Notes
2021/11/22	BXELK-L release
2024/01/31	DESK-XZ7-L release
2024/11/22	Updated kit content list

Unboxing

Once you've received the kit, please open the box and check the kit contents with the packing list included in the box, using the table on this chapter as a reference.

The hardware components (SOM, carrier boards and display) are pre-assembled, as shown in the picture below:

Kit Contents

The following table list the kit components:

Component	Description	Notes
	BORA Xpress SOM (p/n DBXF4110S2R) SoC: Xilinx XC7Z030 (866Mhz, Speed "-3", Tj 0-100°C) SDRAM: 1 GB DDR3 NOR: bootable SPI flash 16 MB NAND: 1GB (SLC)	For more details, please refer to the BORA Xpress Hardware Manual By default, ARM cores frequency is set to 667 MHz and the example Vivado project is implemented for a "-1" device. This choice makes the software released with the kit compatible with possible variants based on different SoM models. In this regard, see also the order codes section.
	BORA Xpress Carrier board
	AC/DC Single Output Wall Mount adapter Output: +12V – 2.0 A
	microSDHC card	Already programmed with factory BSP version. Latest BSP SD card image can be found and programmed following this

Order codes

Order code	Description
BXELK-H-S	This code refers to the default configuration detailed above
BXELK-H-S-D	This variant is like BELK-L-S, except the SOM, which is DBXD4110S2R.

microSD Layout

The microSD provided with the kit is used to store:

• a bootable partition (mmcblk0p1, vfat) containing:
  • binary images (u-boot and kernel images)
• root file system partition (mmcblk0p2, ext4)

---