BORA Xpress SOM

Info Box

Applies to BORA Xpress

Introduction[edit | edit source]

BORA Xpress (also denoted as BoraX) is the top-class Dual Cortex-A9 + FPGA CPU module by DAVE Embedded Systems, based on the recent Xilinx "Zynq" XC7Z015 / XC7Z030 application processor. BORA Xpress offers great computational power, thanks to the rich set of peripherals, the Dual Cortex-A9 and the Artix-7 FPGA inside. BORA Xpress is designed in order to keep full compatibility with the ULTRA Line CPU modules, to guarantee the premium quality and technical value of those customers that require top performances.

The Hardware section provides detailed information about hardware interfaces and characteristics. This document will provide a functional overview of the module and will focus on system-related issues.

Block diagram[edit | edit source]

The following picture shows a simplified block diagram of BORA Xpress module.

Product Highlights[edit | edit source]

Unmatched performance thanks to Dual ARM Cortex-A9 @ up to 1GHz
SERDES: Xpress lanes up to 6.25 Gbps
All memories you need: on-board NOR and NAND Flash
Enabling smarter system thanks to Artix-7 or Kintex-7 FPGA integrated on-chip
FPGA banks wide range PSU input from 1.2V to 3.3V
Highest security and reliability: internal voltage monitoring and power good enable
Reduced carrier complexity: dual CAN, USB, Ethernet GB and native 3.3 V I/O
Easy to fit thanks to its small form factor
Accurate timing application thanks to on-board 5ppm RTC
Pin2Pin Compatibility with BORA SOM based on Zynq XC7Z010/XC7Z020

Feature Summary[edit | edit source]

Table: CPU and Memories
Feature	Specifications	Options
CPU	Xilinx Dual ARM Cortex-A9 ZYNQ XC7Z015/ZC7Z030 @ 666MHz (up to 1GHz)
Cache	L1: 32Kbyte instruction, 32Kbyte data L2: 512Kbyte for each core
RAM	DDR3 SDRAM @ 533 MHz Up to 1 GB
SRAM	On-chip RAM, 256 KB
Storage	Flash NOR SPI (8, 16 MB) Flash NAND (all sizes up to 1GB, on request)

Table: Peripherals
Feature	Specifications	Options
Coprocessors	NEON™ & Single / Double Precision Floating Point for each processor
USB	Up to 2x 2.0 OTG ports
UARTs	Up to 2x UART ports
GPIO	Up to x lines, shared with other functions (interrupts available)
Networks	Ethernet 10/100/1000 Mbps
CAN	2x full CAN 2.0B compliant interfaces
SD/MMC	2x SD/SDIO 2.0/MMC3.31 compliant controllers
Serial buses	2x full-duplex SPI ports with three peripheral chip selects 2x master and slave I²C interfaces
Timers	2x triple timers/counters (TTC)
RTC	On board (DS3232), external battery powered
Debug	JTAG IEEE 1149.1 Test Access Port CoreSight™ and Program Trace Macrocell (PTM)

Table: Electrical, Mechanical and Environmental Specifications
Feature	Specifications	Options
FPGA models	Artix™-7 / Kintex™-7
Logic cells	74K to 125K
LUTs	46K to 78K
Flip flops	92K to 157K
RAM	3.3Mb to 9.3Mb
DSP slices	160 to 400
Differential pairs	Up to 72 differential pairs for high freq. interfaces
Serial Transceivers	4 Lanes up to 6.6Gbps

Table: Electrical, Mechanical and Environmental Specifications
Feature	Specifications	Options
Supply Voltage	3.3V, on-board voltage regulation
Active power consumption	Please refer to Power consumption section
Dimensions	85mm x 50mm
Weight
MTBF
Operating temperature	0..70 °C -40..+85 °C
Connectors	3 x 140 pins 0.6mm pitch