Difference between revisions of "SDV04"

From DAVE Developer's Wiki
Jump to: navigation, search
(Created page with "{{InfoBoxTop}} {{Applies To SDVX}} {{InfoBoxBottom}} ==Introduction== 500px|frameless|border SDV04 is a carrier board designed to host :Category:Axel_U...")
 
Line 7: Line 7:
 
[[File:SDV04.png|500px|frameless|border]]
 
[[File:SDV04.png|500px|frameless|border]]
  
−
SDV04 is a carrier board designed to host [[:Category:Axel_ULite|AXEL ULITE]] and [[:Category:AxelLite|AXEL LITE]] (through an adapter) SoMs. It exports major specific peripherals connectors fro each SoMs.
+
SDV04 is a carrier board designed to host directly [[:Category:AXEL_ULite|AXEL ULITE]] and [[:Category:AxelLite|AXEL LITE]] SoMs. It exports major specific peripherals connectors for each SoMs.
  
 
==Block Diagram==
 
==Block Diagram==
Line 14: Line 14:
  
 
[[File:SDV04-block diagram.png|700px|frameless|border|centre]]
 
[[File:SDV04-block diagram.png|700px|frameless|border|centre]]
 +
 +
==Connection layout==
 +
 +
The following picture shows SDV04's connection layout:
 +
[[File:SFCZG-connectors.png|700px|frameless|border|centre]]
  
 
== Features ==
 
== Features ==
Line 22: Line 27:
 
* Single/Dual channel LVDS connector - for AxelLite SOM
 
* Single/Dual channel LVDS connector - for AxelLite SOM
 
* Single channel LVDS connector - for AxelUlite SOM
 
* Single channel LVDS connector - for AxelUlite SOM
 +
* I2C touch connector
 
* Audio connector with internal power amplifier
 
* Audio connector with internal power amplifier
 
* Pin strip expansion connectors for GPIOs
 
* Pin strip expansion connectors for GPIOs
Line 125: Line 131:
 
|-
 
|-
 
|4  ||DGND || Ground || -
 
|4  ||DGND || Ground || -
 +
|-
 +
|}
 +
 +
=== TOUCH - J5 ===
 +
 +
J5 is Molex 53398-0671 6 pin connector. It can be used to interface a CPT Capacitive touchscreen device integrated into a standard LCD panel.
 +
 +
The following table reports the connector's pinout:
 +
 +
{| class="wikitable"
 +
|-
 +
!Pin#
 +
!Pin name
 +
!Function
 +
!Notes
 +
|-
 +
|1 || VDD || 5V or 3V3 depending on internal connection || -
 +
|-
 +
|2 || SDA || I2C SDA || -
 +
|-
 +
|3 || SCL || I2C SCL || -
 +
|-
 +
|4 || INT || Interrupt || -
 +
|-
 +
|5 || RES || Reset || -
 +
|-
 +
|6  ||DGND || Ground || -
 
|-
 
|-
 
|}
 
|}
Line 170: Line 203:
 
|-
 
|-
 
|}
 
|}
−
 
  
 
=== MicroSD - J13 ===
 
=== MicroSD - J13 ===
Line 202: Line 234:
 
|-
 
|-
 
|13 ||SD1_CD|| Card detect || -
 
|13 ||SD1_CD|| Card detect || -
 +
|-
 +
|}
 +
 +
=== Audio - J14 ===
 +
 +
J14 is a 53375-0610 Molex 6x2.5mm pin connector.
 +
 +
The following table reports the connector's pinout:
 +
 +
{| class="wikitable"
 +
|-
 +
!Pin#
 +
!Pin name
 +
!Function
 +
!Notes
 +
|-
 +
|1 ||HSOL || Left channel Headphone/line output || -
 +
|-
 +
|2 ||HSOR || Right channel Headphone/line output || -
 +
|-
 +
|3 ||SPKP || Speaker +  output || -
 +
|-
 +
|4 ||SPKM || Speaker -  output || -
 +
|-
 +
|5 ||MIC IN || Microphone input || -
 +
|-
 +
|6 ||MIC BIAS || Microphone bias || -
 
|-
 
|-
 
|}
 
|}

Revision as of 10:01, 24 September 2018

HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services
Info Box
SDVX.png Applies to SDVX

Introduction[edit | edit source]

SDV04.png

SDV04 is a carrier board designed to host directly AXEL ULITE and AXEL LITE SoMs. It exports major specific peripherals connectors for each SoMs.

Block Diagram[edit | edit source]

The following picture shows SDV04's block diagram:

700px

Connection layout[edit | edit source]

The following picture shows SDV04's connection layout:

SFCZG-connectors.png

Features[edit | edit source]

  • 10/100 Ethernet
  • 1x USB HOST, 1x USB OTG
  • Serial port (RS232)
  • Single/Dual channel LVDS connector - for AxelLite SOM
  • Single channel LVDS connector - for AxelUlite SOM
  • I2C touch connector
  • Audio connector with internal power amplifier
  • Pin strip expansion connectors for GPIOs

Connectors pinout[edit | edit source]

J16 - PSU[edit | edit source]

J16 is a Molex 26-60-4020 2x1-pn 3.56mm pitch connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 DGND Ground -
2 EXT_12V 12V Power Supply -

J1 - SODIMM connector[edit | edit source]

J1 is a TE Connectivity 204-pin SODIMM socket. The pinout matches the Axel Lite pinout and the Axel ULite pinout.


J6 - JTAG[edit | edit source]

J6 is a SAMTEC FSI-110-03-G-S connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 DGND - -
2 JTAG_TCK - -
3 JTAG_TMS - -
4 JTAG_TDO - -
5 JTAG_TDI - -
6 JTAG_nTRST - -
7 CPU_PORn - -
8 N.C. - -
9 N.C. - -
10 JTAG_VREF - -

USB HOST - J11[edit | edit source]

J11 is a standard USB Type A Vertical Female host connector.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 5V VDD -
2 USB_OTG_DN USB OTG Data- -
3 USB_OTG_DP USB OTG Data+ -
4 DGND Ground -

USB OTG - J12[edit | edit source]

J12 is a Molex 4 pin connector. It can be used both as Host or OTG connector depending on internal USB_OTG_ID signal connection

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 5V VDD -
2 USB_OTG_DN USB OTG Data- -
3 USB_OTG_DP USB OTG Data+ -
4 DGND Ground -

TOUCH - J5[edit | edit source]

J5 is Molex 53398-0671 6 pin connector. It can be used to interface a CPT Capacitive touchscreen device integrated into a standard LCD panel.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 VDD 5V or 3V3 depending on internal connection -
2 SDA I2C SDA -
3 SCL I2C SCL -
4 INT Interrupt -
5 RES Reset -
6 DGND Ground -

LVDS - J20[edit | edit source]

J20 is a 10x2 DF13A-20DP header. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1, 2 3.3V_LCD0 +3.3V -
4, 7, 10,
13, 16, 19, 21, 22		 DGND Ground -
3 GPIO VDD or GND (internal mount) -
5 LVDS_TX0_N TX0- -
6 LVDS_TX0_P TX0+ -
9 LVDS_TX1_P TX1+ -
8 LVDS_TX1_N TX1- -
11 LVDS_TX2_N TX2- -
12 LVDS_TX2_P TX2+ -
14 LVDS_CLK_N Clock- -
15 LVDS_CLK_P Clock+ -
17 BL PWM Backlight PWM control -
18 5V LCD Backlight 5V power supply - -
19 GPIO VDD or GND (internal mount) -
20 BL EN Backligth Enable -

MicroSD - J13[edit | edit source]

J13 is a microSD memory card connector. It can be used as a boot device properly configuring the J18 pin header connector.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 SD1_DAT2 DATA[2] -
2 SD1_DAT3 Card Detect/DATA[3] -
3 SD1_CMD CMD line -
4 VDD 3.3V Power Supply -
5 SD1_CLK Clock -
6, 9, 10, 11, 12 DGND - -
7 SD1_DAT0 DATA[0] -
8 SD1_DAT1 DATA[1] -
13 SD1_CD Card detect -

Audio - J14[edit | edit source]

J14 is a 53375-0610 Molex 6x2.5mm pin connector.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 HSOL Left channel Headphone/line output -
2 HSOR Right channel Headphone/line output -
3 SPKP Speaker + output -
4 SPKM Speaker - output -
5 MIC IN Microphone input -
6 MIC BIAS Microphone bias -

JP1 pin strip connectors[edit | edit source]

JP1 is a 2x6-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 3.3V - -
2 DGND Ground -
3 GPIO_IN_0 -
4 GPIO_OUT_0 -
5 GPIO_IN_1 -
6 GPIO_OUT_1 -
7 GPIO_IN_2 -
8 GPIO_OUT_2 -
9 GPIO_IN_3 -
10 GPIO_OUT_3 -
11 GPIO_IN_4 -
12 GPIO_OUT_4 -
HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services
Retrieved from "https://wiki.dave.eu/index.php?title=SDV04&oldid=8122"