DESK-XZ7-L/Development/Creating and building the Petalinux project
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2022/11/18 | DESK-XZ7-L-1.0.0-rc1 release | ||
| 2023/01/22 | DESK-XZ7-L-1.0.1 release | ||
Creating and building the Petalinux project[edit | edit source]
Reference[edit | edit source]
- PetaLinux Tools Documentation Reference guide UG1144
- PetaLinux Tools DocumentationCommand Line Reference Guide UG1157
Petalinux build[edit | edit source]
To reproduce Petalinux build:
Clone the repository
git clone --recursive git@git.dave.eu:desk-xz-l/petalinux.git -b desk-xz7-l-1.0.1
cd petalinux
Setup the Petalinux environment
source /opt/Xilinx/petalinux/2021.2/settings.sh
Inizialize configuration file
You can use the following configuration file
| Config file | Boot |
|---|---|
config_bora
|
uSD and QSPI-NOR |
config_borax
|
uSD and QSPI-NOR |
config_boralite
|
uSD and QSPI-NOR |
config_boralite_nand
|
NAND |
config_boralite_nand_usd
|
uSD with NAND support |
In order to select a configuration file use the following command
cp project-spec/configs/<configuration file> project-spec/configs/config
Update the hardware description
Hardware description come from to Vivado project. Vivado project is already cloned into Petalinux project.
To build Hardware description file, please see this page: Creating and building the Vivado project
You can use the following command to update the hardware description
petalinux-config --get-hw-description vivado/vivado/<path to .xsa>
When applying the hardware description, the standard menuconfig interface will popup: just save the current configuration to proceed. If you won't see menuconfig interface, perform the following command
petalinux-config --get-hw-description vivado/vivado/<path to .xsa> --silentconfig
Run the Petalinux build
petalinux-build
