Bora Embedded Linux Kit (BELK)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
Bora Embedded Linux Kit (BELK for short) provides all the necessary components required to set up the developing environment for:
- configuring the system (PS and PL) at hardware level
- build the first-stage bootloader (FSBL)
- building the second stage bootloader (U-Boot)
- building and running Linux operating system on Bora-based systems
- building Linux applications that will run on the target
Dave provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system.
Kit Contents[edit | edit source]
| Component | Description | Notes |
|---|---|---|
|
Bora SOM CPU: Xilinx Zynx 7000 |
Please refer to Bora Hardware Manual |
|
Bora-EVB-Lite Carrier board | Please refer to BoraEVB-Lite page |
|
AC/DC Single Output Wall Mount adapter Output: +12V – 2.0 A |
Please refer to Belk Quick Start Guide |
|
MicroSDHC card with SD adapter and USB adapter | Please refer to Belk Quick Start Guide |
Related Documents[edit | edit source]
- Bora Hardware Manual
- Belk Quick Start Guide (available for BELK kit owners)
