Difference between revisions of "Booting the system via NFS (BELK/BXELK)"
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{InfoBoxTop}} | {{InfoBoxTop}} | ||
{{Applies To Bora}} | {{Applies To Bora}} | ||
| − | |||
| − | |||
{{InfoBoxBottom}} | {{InfoBoxBottom}} | ||
| Line 24: | Line 22: | ||
|} | |} | ||
| − | + | ==Instructions== | |
| − | == | + | It is assumed that the development environment has been set up properly as described [[Build_system_(BELK)|here]]. |
| − | It is assumed that the development environment has been set up properly as described [[ | ||
Assuming that: | Assuming that: | ||
| Line 32: | Line 29: | ||
*a kernel image is available and ready to be downloaded through tftp | *a kernel image is available and ready to be downloaded through tftp | ||
*the root file system has been uncompressed into a nfs share | *the root file system has been uncompressed into a nfs share | ||
| − | the system can boot using the <code>net_nfs</code>{{efn|The net_nfs configuration, besides setting the system for booting from the network, triggers a command (<code>program_fpga</code>) which loads the FPGA binary from TFTP and programs the bitstream.}} configuration, as described [[ | + | the system can boot using the <code>net_nfs</code>{{efn|The net_nfs configuration, besides setting the system for booting from the network, triggers a command (<code>program_fpga</code>) which loads the FPGA binary from TFTP and programs the bitstream.}} configuration, as described [[Booting_Linux_Kernel#Configuration_net_nfs|here]]. |
| + | |||
| + | |||
| + | |||
{{notelist}} | {{notelist}} | ||
| − | |||
| − | |||
Revision as of 11:56, 29 June 2017
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
History[edit | edit source]
| Version | Date | BELK version | Notes |
|---|---|---|---|
| 1.0.0 | November 2015 | 3.0.0 | First release |
| 2.0.0 | July 2017 | 3.0.0, 4.0.0 | Updates for BELK-4.0.0/BXELK-2.0.0 |
Instructions[edit | edit source]
It is assumed that the development environment has been set up properly as described here.
Assuming that:
- the CPU module is booting with a working FSBL (or U-boot SPL for BELK-4.0.0/BXELK-2.0.0) and U-Boot image (either from flash NOR SPI or flash NAND or MicroSD card)
- a kernel image is available and ready to be downloaded through tftp
- the root file system has been uncompressed into a nfs share
the system can boot using the net_nfs[a] configuration, as described here.
- ↑ The net_nfs configuration, besides setting the system for booting from the network, triggers a command (
program_fpga) which loads the FPGA binary from TFTP and programs the bitstream.
