BELK-TN-006: Using PetaLinux to Build BELK/BXELK Software Components
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
HistoryEdit
| Version | Date | Notes |
|---|---|---|
| 1.0.0 | September 2018 | First public release |
IntroductionEdit
As explained here, BELK/BXELK structure is not based on PetaLinux. BELK/BXELK make use of a standardized Yocto-based build system to build all the software components—U-Boot, Linux kernel, and root filesystem—that run on the Processing System (PS). This choice is more flexible and more modularized but it requires a little bit more knowledge of embedded Linux systems.
That being said, there are cases in which it can be convenient to build such components with PetaLinux build system, however. This technical note shows how to build the Linux kernel image released with BELK/BXELK with PetaLinux build system.
The procedure was tested with the following configuration.
| Component | Description | Notes |
|---|---|---|
|
BORA SOM CPU: Xilinx Zynx 7000 |
Please refer to Bora Hardware Manual |
|
BORA Carrier board | Please refer to BoraEVB page |
|
AC/DC Single Output Wall Mount adapter Output: +12V – 2.0 A |
Please refer to Belk Quick Start Guide |
|
MicroSDHC card with SD adapter and USB adapter | Please refer to Belk Quick Start Guide |