Difference between revisions of "AXEL ULite SOM/AXEL ULite Evaluation Kit/Getting started/Boot Configurations"
(→Boot Configurations) |
|||
| Line 24: | Line 24: | ||
===Available options=== | ===Available options=== | ||
| − | Boot modes can be selected by J18 switches which acts directly on J2.20 [[AXEL_ULite_SOM/AXEL_ULite_Hardware/Pinout_Table#SODIMM_EVEN_pins_declaration | | + | Boot modes can be selected by J18 switches which acts directly on J2.20 [[AXEL_ULite_SOM/AXEL_ULite_Hardware/Pinout_Table#SODIMM_EVEN_pins_declaration | BOOT_MODE0]] configuration pin. |
| − | J18.1 switch is mapped to | + | J18.1 switch is mapped to BOOT_MODE0 pin allowing different boot modes. |
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 14:47, 19 July 2021
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Jun 2021 | First DESK release | |
Boot Configurations[edit | edit source]
AXEL ULite Evaluation Board is built upon i.MX6UL processor.
The following sections detail boot configuration options, which differ depending on the SoM.
Available options[edit | edit source]
Boot modes can be selected by J18 switches which acts directly on J2.20 BOOT_MODE0 configuration pin.
J18.1 switch is mapped to BOOT_MODE0 pin allowing different boot modes.
| Boot options order code | Jumper mounted | Jumper not mounted |
|---|---|---|
| Boot from NOR | NOR | SD |
| Boot from NAND | NAND | SD |
Inserting a jumper on the left position header, the internal storage device is selected as a primary boot device: i.e. NOR SPI or NAND flash.
