ONDA SOM/ONDA Hardware/Peripherals/USB
< ONDA SOM | ONDA Hardware
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2026/03/16 | First documentation release | ||
Contents
Peripheral USB[edit | edit source]
ONDA provides one USB 2.0 (Full Speed, up to 480 Mbps) port with on-board USB3317 PHY Hi-Speed and support to the On-The-Go (OTG) specifications. The transceiver is connected to the USB1 controller (MIO bank 502, pins PS_MIO[52:63]). The following table describes the interface signals:
| Pin name | Conn. pin | Function | Notes |
|---|---|---|---|
| USB_D_P | J1.114 | D+ pin of the USB cable | - |
| USB_D_N | J1.116 | D- pin of the USB cable | - |
| USB_CPEN | J1.111 | External 5 volt supply enable | This pin is used to enable the external VBUS power supply |
| USB_VBUS | J1.113 | VBUS pin of the USB cable | - |
| USB_ID | J1.115 | ID pin of the USB cable | For non-OTG applications this pin can be floated. For an A-device ID is grounded. For a B-device ID is floated. |
