ONDA SOM/ONDA Hardware/Peripherals/UART
< ONDA SOM | ONDA Hardware
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2026/03/13 | First documentation release | ||
Contents
Peripheral UART[edit | edit source]
The UART controller is a full-duplex asynchronous receiver and transmitter that supports a wide range of programmable baud rates and I/O signal formats. UART1 port is routed to the SOM connectors as a 2-wire interface. The following table describes the interface signals:
| Pin name | Conn. pin | Function | Notes |
|---|---|---|---|
| PS_MIO25_500 | J1.80 | UART RX | - |
| PS_MIO24_500 | J1.82 | UART TX | - |
