BORA Lite SOM/BORA Lite Hardware/Peripherals/USB
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2020/12/04 | New documentation layout | ||
BORA Lite provides one USB 2.0 (Full Speed, up to 480 Mbps) port with on-board PHY (SMSC USB3317) and support to the On-The-Go (OTG) specifications. The transceiver is connected to the USB1 controller (MIO bank 1, pins PS_MIO[28:39]). The following table describes the interface signals:
| Pin name | Conn. pin | Function | Notes |
|---|---|---|---|
| USBP1 | J1.200 | D+ pin of the USB cable | - |
| USBM1 | J1.202 | D- pin of the USB cable | - |
| USBOTG_CPEN | J1.194 | External 5 volt supply enable | This pin is used to enable the external Vbus power supply |
| OTG_VBUS | J1.196 | VBUS pin of the USB cable | - |
| OTG_ID | J1.198 | ID pin of the USB cable | For non-OTG applications this pin can be floated. For an A-device ID is grounded. For a B-device ID is floated. |
