Difference between revisions of "SBC Axel SBC/Interfaces and Connectors/Power Supply"
(Created page with "{{:AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/Power Supply}}") |
|||
| Line 1: | Line 1: | ||
{{:AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/Power Supply}} | {{:AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/Power Supply}} | ||
| + | [[Category:SBC Axel]] | ||
Latest revision as of 09:40, 30 December 2020
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2020/10/27 | New documentation layout | ||
Power Supply[edit | edit source]
Description[edit | edit source]
Power is provided through the J2 connector. Power voltage range is +[12-24 V].
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| 1 | DGND | Ground |
| 2 | VIN | +[12-24 V] |
Power LED[edit | edit source]
DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.
