SBC Axel SBC/Interfaces and Connectors/Power Supply
History | |||
---|---|---|---|
ID# | Issue Date | Notes | |
28/10/2020 | New documentation layout |
Power Supply[edit | edit source]
Description[edit | edit source]
Power is provided through the J2 connector. Power voltage range is +[12-24 V].
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
Signals[edit | edit source]
The following table describes the interface signals:
Pin# | Pin function | Pin Notes |
---|---|---|
1 | DGND | Ground |
2 | VIN | +[12-24 V] |
Power LED[edit | edit source]
DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.