Difference between revisions of "On board JTAG connector (AxelLite)"
DevWikiAdmin (talk | contribs) (Created page with "{{InfoBoxTop}} {{AppliesToAxelLite}} {{InfoBoxBottom}} == Introduction == JTAG signals are routed to a dedicated connector (J7) on the Axel Lite PCB. The connector is placed...") |
(No difference)
|
Revision as of 15:08, 27 March 2014
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
JTAG signals are routed to a dedicated connector (J7) on the Axel Lite PCB. The connector is placed on the top side of the PCB, at the upper-right corner (please see the picture below).
J7 - Connector's pinout[edit | edit source]
J7 footprint mates with Samtec FSI-110-03-G-S connector. The following table reports the connector's pinout:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | - | - |
| 2 | JTAG_TCK | - | - |
| 3 | JTAG_TMS | - | - |
| 4 | JTAG_TDO | - | - |
| 5 | JTAG_TDI | - | - |
| 6 | JTAG_nTRST | - | - |
| 7 | CPU_PORn | - | - |
| 8 | N.C. | - | - |
| 9 | N.C. | - | - |
| 10 | JTAG_VREF | - | - |
