ORCA SOM/ORCA Hardware/Peripherals/IPS
< ORCA SOM | ORCA Hardware
Revision as of 10:06, 4 February 2021 by U0016 (talk | contribs) (Created page with "<section begin="History" /> {| style="border-collapse:collapse; " ! colspan="4" style="width:100%; text-align:left" ; border-bottom:solid 2px #ededed" |History |- ! style="bo...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Feb 2021 | First release | |
Peripheral ISP[edit | edit source]
The Image Signal Processor (ISP) available on ORCA is based on iMX8MPlus SoC wich provides the following interfaces:
- I/O signals to control mechanical shutter, flash and other advanced camera features
Description[edit | edit source]
The Image Signal Processing (ISP) core is a complete video and still picture input block. It contains image processing and color space conversion (RAW Bayer to YUV) functions.
The ISP is connected to a MIPI-CSI interface and receives 1 pixel/clock from the CSI Rx Controller.
The following features are supported by the main ISP submodule:
- ITU-R BT.601 compatible 12-bit video interface
- Variable sensor interface for RGB-Bayer Sensors
- Lens shade correction
- Filter (Noise reduction, Sharpness, Blurring)
- Programmable gamma correction for sensor adaptation and display correction
- Exposure measurement for AE (AEC/AGC) Auto focus measurement (AF)
- Mechanical shutter control
- Flash light control
- Video Stabilization
Pin mapping[edit | edit source]
The Pin mapping is described in the Pinout table section
