| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/02/04 | First release | ||
Peripheral ISPEdit
The Image Signal Processor (ISP) available on ORCA is based on iMX8MPlus SoC wich provides the following interfaces:
- I/O signals to control mechanical shutter, flash and other advanced camera features
DescriptionEdit
The Image Signal Processing (ISP) core is a complete video and still picture input block. It contains image processing and color space conversion (RAW Bayer to YUV) functions.
The ISP is connected to a MIPI-CSI interface and receives 1 pixel/clock from the CSI Rx Controller.
The following features are supported by the main ISP submodule:
- ITU-R BT.601 compatible 12-bit video interface
- Variable sensor interface for RGB-Bayer Sensors
- Lens shade correction
- Filter (Noise reduction, Sharpness, Blurring)
- Programmable gamma correction for sensor adaptation and display correction
- Exposure measurement for AE (AEC/AGC) Auto focus measurement (AF)
- Mechanical shutter control
- Flash light control
- Video Stabilization
Pin mappingEdit
The Pin mapping is described in the Pinout table section