Open main menu

DAVE Developer's Wiki β

ORCA SBC/Interfaces and Connectors/Audio

< ORCA SBC
History
Issue Date Notes
2021/12/10 First release


Contents

Audio interfaceEdit

There is no directly available Audio interface on the Evaluation Kit, two SAI and one SPDIF full duplex interfaces are available on the expansion connector.

DescriptionEdit

The SAI and SPDIF interfaces are available on the Evaluation Kit at the connector J8.

J8 is a 20x2x2.54mm pin header expansion connector that delivers many interfaces unused on board.


 
Audio connector (on J8)

SignalsEdit

The following table describes the interfaces signals:

Pin# SOM Pin# Pin name Pin function Pin Notes
1, 17 - 3V3_CB Power output for transceiver supply BOARD_PGOOD driven rail
2, 4 - 5V_VIN Power output for transceiver supply Always ON rail
6, 9, 14, 20,

25, 30, 34, 39

- DGND Ground
7 J15. SAI2_TXFS Transmit Frame Sync
8 J15. SAI2_RXFS Receive Frame Sync
10 J15. SAI2_RXC Receive Bit Clock
11 J15. SAI2_RXD0 Receive Data 0
12 J15. SAI2_TXC Transmit Bit Clock
16 J15. SAI2_TXD0 Transmit Data 0
18 J15. SAI2_MCLK Audio Master Clock
13 J15. SPDIF_RX SPDIF Receiver
15 J15. SPDIF_TX SPDIF Transmitter
22 J15. SAI5_MCLK Audio Master Clock
32 J15. SAI5_RXFS Receive Frame Sync
35 J15. SAI5_RXD3 Receive Data 3
36 J15. SAI5_RXD2 Receive Data 2
37 J15. SAI5_RXD1 Receive Data 1
38 J15. SAI5_RXD0 Receive Data 0
40 J15. SAI5_RXC Receive Bit Clock

Please note that all the signals are 0-3.3V level.

Device mappingEdit

The device mapping depends on the used device and the device tree configuration.

Device usageEdit

The associated device can be accessed in Linux by standard stacks, such as pulse audio or alsalib.