| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
IntroductionEdit
NaonEVB-Mid is a carrier board designed to evaluate the functionalities of Naon SOM.
The following picture shows block diagram of NaonEVB-Lite board.
The following images show top and bottom side of NaonEVB-Mid carrier board respectively. Peripherals and interfaces external to Naon SOM are highlighted.
Quick start (NELK)Edit
This section describes how to quick start NaonEVB-Mid-based system, provided that it is programmed according to NELK configuration.
- connect the serial cable, provided with the board, to J17
- connect this cable to PC COM port through a NULL-modem cable (not provided)
- start your favourite terminal software on PC; communication parameters are:
- baud rate: 115200 Bps
- data bits: 8
- stop bits: 1
- parity: none
- (optional) to connect the system to Ethernet LAN, please plug cable on connector J11
- (optional) to connect the system to HDMI TV/LCD, please plug cable on connector J6
- connect a 12Vcc power supply to J14
Once power has been applied, U-Boot bootloader will be executed and the following messages will be printed on serial console (please note that messages may vary due different U-Boot releases)
Hardware informationEdit
Bootstrap settingsEdit
JTAG interfacesEdit
Please refer to JTAG interfaces (NaonEVB-Mid).
Video interfacesEdit
NaonEVB-Mid provides a rich set of video input/output interfaces. Please refer to this page for more details.
SchematicsEdit
|
Please note that Orcad CIS is required to get all the information about BOM variants included in .dsn files.
PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff". |
|