Difference between revisions of "Mechanicals (Bora)"
DevWikiAdmin (talk | contribs) m |
DevWikiAdmin (talk | contribs) m (→2D and 3D drawings) |
||
| Line 26: | Line 26: | ||
== 2D and 3D drawings == | == 2D and 3D drawings == | ||
| − | * DXF: http://www.dave.eu/sites/default/files/files/bora.dxf | + | * DXF: http://www.dave.eu/sites/default/files/files/bora.dxf.zip |
* IDF (3D): http://www.dave.eu/sites/default/files/files/bora-3D-idf.zip | * IDF (3D): http://www.dave.eu/sites/default/files/files/bora-3D-idf.zip | ||
Revision as of 14:26, 3 April 2014
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Mechanical specifications[edit | edit source]
This chapter describes the mechanical characteristics of the Bora module.
Board Layout[edit | edit source]
The following figure shows the physical dimensions of the Bora module:
The following figure highlights the maximum components' heights on Bora module:
Connectors[edit | edit source]
The following figure shows the Bora connector layout:
