| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Oct 2020 | First release | |
Peripheral NANDEdit
MITO 8M SOM provides a NAND interface available for an external memory device connection.
DescriptionEdit
The NAND interface available on MITO 8M is based on iMX8M SoC.
The NAND Flash controller supports the following standards and features:
- 8-bit NAND FLASH, up to 4 devices supported by 4 chip-selects and 1 ganged ready/busy
- ONFI 2.x complaint, synchronous clock rate of up to 100 MHz with data rate of up to 200 MB/s
- Support ONFI NAND for Micron and Hynix and Toggle NAND for Toshiba and Samsung
- BCH62 for ECC, up to 200MB/s
Pin mappingEdit
The Pin mapping is described in the Pinout table section