MITO 8M SOM/MITO 8M Hardware/Peripherals/NAND
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2020/10/27 | First release | ||
Peripheral NAND[edit | edit source]
MITO 8M SOM provides a NAND interface available for an external memory device connection.
The availability of this interface is related to the SOM mounting option:
- on NAND on board version, the NAND interface is internally connected, and the SD1 interface is routed externally the SOM
- on eMMC on board version, the SD1 interface is internally connected, and the NAND interface is routed externally the SOM
See Pin mapping tables for connection details.
Description[edit | edit source]
The NAND interface available on MITO 8M is based on iMX8M SoC.
The NAND Flash controller supports the following standards and features:
- 8-bit NAND FLASH, up to 4 devices supported by 4 chip-selects and 1 ganged ready/busy
- ONFI 2.x complaint, synchronous clock rate of up to 100 MHz with data rate of up to 200 MB/s
- Support ONFI NAND for Micron and Hynix and Toggle NAND for Toshiba and Samsung
- BCH62 for ECC, up to 200MB/s
Pin mapping[edit | edit source]
The Pin mapping is described in the Pinout table section
