Host setup and development flow (BELK/BXELK)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
The software development flows for BoraX requires the use of several tools on host side. This document collects several resources available in this wiki, in order to illustrate how to install and set up these tools.
For setting up the development environment
- Please first refer to this document to have an overview of it
- Then, refer to this address for operational instructions.
To deepen target software-related aspects, these specific pages are available:
- This page for detailed instruction on U-Boot building
- This page for detailed instruction on Linux kernel building
- This link shows hot to use Yocto build system to build the entire BSP, including U-Boot bootloader, Linux kernel and root file system.
About Programmable Logic (PL), please refer to this page that illustrates a simple reference design for BoraEVB and BoraXEVB.
