Difference between revisions of "FAQs (Naon)"
DevWikiAdmin (talk | contribs) m (→I've received the NELK package. How am I supposed to start working with it?) |
DevWikiAdmin (talk | contribs) m |
||
| Line 19: | Line 19: | ||
== Q: Do you provide an evaluation kit? == | == Q: Do you provide an evaluation kit? == | ||
| − | '''A''': yes, we provide the Naon Embedded Linux Kit. Please refer to [[Naon_Embedded_Linux_Kit_(NELK)]] | + | '''A''': yes, we provide the Naon Embedded Linux Kit. Please refer to [[Naon_Embedded_Linux_Kit_(NELK)]]. |
= Carrier board design = | = Carrier board design = | ||
| Line 25: | Line 25: | ||
== Q: Can you suggest some guidelines for the carrier board design? == | == Q: Can you suggest some guidelines for the carrier board design? == | ||
| − | '''A''': As a starting point, you can refer to the [[Carrier_board_design_guidelines_(SOM)]] page, that will highlight some best practices. | + | '''A''': As a starting point, you can refer to the [[Carrier_board_design_guidelines_(SOM)]] page, that will highlight some best practices that applies to all SOMs. For specific information on Naon, please refer to the [[Integration_guide_(Naon) | Naon integration guide]]. |
= Using NELK = | = Using NELK = | ||
| Line 44: | Line 44: | ||
* Build the software components for the Naon platform as described in [[Development_Environment_HowTo_(NELK)#Build_the_whole_kit | NELK: Build the whole kit]] | * Build the software components for the Naon platform as described in [[Development_Environment_HowTo_(NELK)#Build_the_whole_kit | NELK: Build the whole kit]] | ||
* Boot the system from network to test the development platform (please refer to [[Development_Environment_HowTo_(NELK)#Boot_the_system | Boot the system]]) | * Boot the system from network to test the development platform (please refer to [[Development_Environment_HowTo_(NELK)#Boot_the_system | Boot the system]]) | ||
| + | |||
| + | == Q: How can I update the NELK version == | ||
| + | |||
| + | '''A''': | ||
Revision as of 12:59, 24 May 2013
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
This page collects all the Frequently Asked Question regarding Naon
General[edit | edit source]
Q: Where can I found Naon SOM hardware information?[edit | edit source]
A: please refer to the following pages:
Q: Do you provide an evaluation kit?[edit | edit source]
A: yes, we provide the Naon Embedded Linux Kit. Please refer to Naon_Embedded_Linux_Kit_(NELK).
Carrier board design[edit | edit source]
Q: Can you suggest some guidelines for the carrier board design?[edit | edit source]
A: As a starting point, you can refer to the Carrier_board_design_guidelines_(SOM) page, that will highlight some best practices that applies to all SOMs. For specific information on Naon, please refer to the Naon integration guide.
Using NELK[edit | edit source]
I've received the NELK package. How am I supposed to start working with it?[edit | edit source]
A: You can follow the steps listed below:
- Check che kit contents with the packing list included in the box
- If the bootable SD card is available:
- insert the SD into the card reader on the carrier board
- connect the power supply adapter and the serial cable as described in NaonEVB-Mid Quick start and NaonEVB-Lite Quick start
- start your terminal emulator program
- switch on the power supply
- monitor the boot process on the serial console
- Install the DVDK virtual machine image (please refer to Starting DVDK)
- Check the virtual machine components (please refer to NELK DVDK layout)
- Build the software components for the Naon platform as described in NELK: Build the whole kit
- Boot the system from network to test the development platform (please refer to Boot the system)
Q: How can I update the NELK version[edit | edit source]
A:
