Difference between revisions of "FAQs (Naon)"
DevWikiAdmin (talk | contribs) m (→I've received the NELK package. How am I supposed to start working with it?) |
DevWikiAdmin (talk | contribs) m (→I've received the NELK package. How am I supposed to start working with it?) |
||
| Line 33: | Line 33: | ||
'''A''': You can follow the '''steps listed below''': | '''A''': You can follow the '''steps listed below''': | ||
| − | * Check che kit contents | + | * Check che kit contents with the packing list included in the box |
| − | * If | + | * If the bootable SD card is available: |
** insert the SD into the card reader on the carrier board | ** insert the SD into the card reader on the carrier board | ||
| − | ** connect the power supply adapter | + | ** connect the power supply adapter and the serial cable as described in [[NaonEVB-Mid#Quick_start_.28NELK.29 | NaonEVB-Mid Quick start]] and [[NaonEVB-Lite#Quick_start_.28NELK.29 | NaonEVB-Lite Quick start]] |
| − | |||
** start your terminal emulator program | ** start your terminal emulator program | ||
** switch on the power supply | ** switch on the power supply | ||
** monitor the boot process on the serial console | ** monitor the boot process on the serial console | ||
| − | * Install the DVDK virtual machine image | + | * Install the DVDK virtual machine image (please refer to [[VirtualBox_Starting_DVDK_Virtual_Machine | Starting DVDK]]) |
| − | * Check the virtual machine components | + | * Check the virtual machine components (please refer to [[Naon_Embedded_Linux_Kit_(NELK)#NELK_DVDK_Layout | NELK DVDK layout]]) |
| − | + | * Build the software components for the Naon platform as described in [[Development_Environment_HowTo_(NELK)#Build_the_whole_kit | NELK: Build the whole kit]] | |
| − | * Build the software components for the Naon platform | + | * Boot the system from network to test the development platform (please refer to [[Development_Environment_HowTo_(NELK)#Boot_the_system | Boot the system]]) |
| − | * Boot the system from network to test the development platform | ||
Revision as of 12:54, 24 May 2013
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
This page collects all the Frequently Asked Question regarding Naon
General[edit | edit source]
Q: Where can I found Naon SOM hardware information?[edit | edit source]
A: please refer to the following pages:
Q: Do you provide an evaluation kit?[edit | edit source]
A: yes, we provide the Naon Embedded Linux Kit. Please refer to Naon_Embedded_Linux_Kit_(NELK)
Carrier board design[edit | edit source]
Q: Can you suggest some guidelines for the carrier board design?[edit | edit source]
A: As a starting point, you can refer to the Carrier_board_design_guidelines_(SOM) page, that will highlight some best practices.
Using NELK[edit | edit source]
I've received the NELK package. How am I supposed to start working with it?[edit | edit source]
A: You can follow the steps listed below:
- Check che kit contents with the packing list included in the box
- If the bootable SD card is available:
- insert the SD into the card reader on the carrier board
- connect the power supply adapter and the serial cable as described in NaonEVB-Mid Quick start and NaonEVB-Lite Quick start
- start your terminal emulator program
- switch on the power supply
- monitor the boot process on the serial console
- Install the DVDK virtual machine image (please refer to Starting DVDK)
- Check the virtual machine components (please refer to NELK DVDK layout)
- Build the software components for the Naon platform as described in NELK: Build the whole kit
- Boot the system from network to test the development platform (please refer to Boot the system)
