| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
IntroductionEdit
Dacu is an ARM Cortex-A8 industrial tablet platform, built around a carrier board hosting the Lizard CPU module
The following picture shows block diagram of Dacu:
Quick startEdit
This section describes how to quick start Dacu system.
"Full control" modeEdit
- connect the serial cable, provided with the board, to
- connect this cable to PC COM port through a NULL-modem cable (not provided)
- start your favourite terminal software on PC; communication parameters are:
- baud rate: 115200 Bps
- data bits: 8
- stop bits: 1
- parity: none
- (optional) to connect the system to Ethernet LAN, please plug cable on connector
- connect a 12Vcc power supply to
Once power has been applied, U-Boot bootloader will be executed and the following messages will be printed on serial console (please note that messages may vary due different U-Boot releases)
"Normal" modeEdit
- Connect the system to Ethernet LAN (connector )
- connect a 12Vcc power supply to
Once power has been applied, the system will boot loading the software components from the internal flash. Once the boot process has completed, you'll get the default Android "desktop":