Dacu
Revision as of 09:18, 19 July 2012 by DevWikiAdmin (talk | contribs)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
Dacu is an ARM Cortex-A8 industrial tablet platform, built around a carrier board hosting the Lizard CPU module
The following picture shows block diagram of Dacu:
Quick start[edit | edit source]
This section describes how to quick start Dacu system.
- connect the serial cable, provided with the board, to
- connect this cable to PC COM port through a NULL-modem cable (not provided)
- start your favourite terminal software on PC; communication parameters are:
- baud rate: 115200 Bps
- data bits: 8
- stop bits: 1
- parity: none
- (optional) to connect the system to Ethernet LAN, please plug cable on connector
- (optional) to connect the system to HDMI TV/LCD, please plug cable on connector
- connect a 12Vcc power supply to
Once power has been applied, U-Boot bootloader will be executed and the following messages will be printed on serial console (please note that messages may vary due different U-Boot releases)
