Difference between revisions of "DWS ADD-ON/DWS Hardware/Pinout Table"
< DWS ADD-ON | DWS Hardware
(Created page with "<section begin=History/> {| style="border-collapse:collapse; " ! colspan="4" style="width:100%; text-align:left" ; border-bottom:solid 2px #ededed" |History |- ! style="borde...") |
(→Connectors description) |
||
| Line 38: | Line 38: | ||
The dedicated carrier board must mount the mating connector and connect the desired peripheral interfaces according to DWS pinout specifications. See the images below for reference: | The dedicated carrier board must mount the mating connector and connect the desired peripheral interfaces according to DWS pinout specifications. See the images below for reference: | ||
| − | [[File:DWS_antenna.png| | + | [[File:DWS_antenna.png|250px|thumb|DWS TOP view with antenna's connector|none]] |
| − | [[File: | + | [[File:DWS_bottom_pins.png|250px|thumb|DWS BOTTOM view with main connector|none]] |
| − | |||
===Pinout table naming conventions === | ===Pinout table naming conventions === | ||
Revision as of 10:24, 17 January 2022
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Jan 2022 | First version | |
Contents
Connectors and Pinout Table[edit | edit source]
Connectors description[edit | edit source]
In the following table are described all available connectors integrated on DWS_ADD-ON:
| Connector name | Connector Type | Notes | Carrier board counterpart |
|---|---|---|---|
| J1 | Dual in line low profile high density connector 30pins | Molex 501920-3001 | Molex 52991-030, others are available with different stand-off |
| Antenna's connector | UFL type | N.A. | UFL cable side (many versions available in the marked already inserted on cables/antenna patches) |
The dedicated carrier board must mount the mating connector and connect the desired peripheral interfaces according to DWS pinout specifications. See the images below for reference:
Pinout table naming conventions[edit | edit source]
This chapter contains the pinout description of the DWS module, grouped in two tables (odd and even pins) that report the pin mapping of the TBD: connector type DWS connector.
Each row in the pinout tables contains the following information:
| Pin | Reference to the connector pin |
| Pin Name | Pin (signal) name on the DWS connectors |
| Internal connections |
Connections to the DWS components
|
| Ball/pin # | Component ball/pin number connected to signal |
| Voltage | I/O voltage levels |
| Type | Pin type:
|
| Notes | Remarks on special pin characteristics |
| Pin MUX alternative functions | Muxes:
The number of functions depends on platform |
Pinout Table ODD pins declaration[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Voltage domain | Type | Notes | Pin MUX alternative functions |
| J1.1 | BT_EN | Bluetooth Enable | 3.3V | I | |||
| J1.3 | BT_CTS | Bluetooth HCI UART CTS | 3.3V | I | |||
| J1.5 | BT_RX | Bluetooth HCI UART RX | 3.3V | I | |||
| J1.7 | BT_RTS | Bluetooth HCI UART RTS | 3.3V | O | |||
| J1.9 | BT_TX | Bluetooth HCI UART TX | 3.3V | O | |||
| J1.11 | DGND | Ground | - | G | |||
| J1.13 | SDIO_DAT3 | SDIO Data Bit 3 | 3.3V | D | |||
| J1.15 | SDIO_DAT2 | SDIO Data Bit 2 | 3.3V | D | |||
| J1.17 | SDIO_DAT1 | SDIO Data Bit 1 | 3.3V | D | |||
| J1.19 | SDIO_DAT0 | SDIO Data Bit 0 | 3.3V | D | |||
| J1.21 | DGND | Ground | - | G | |||
| J1.23 | SDIO_CMD | SDIO Command Line | 3.3V | I/O | |||
| J1.25 | DGND | Ground | - | G | |||
| J1.27 | 3.3V | +3.3V Input Voltage | 3.3V | S | |||
| J1.29 | 5V | +5V Input Voltage | 5V | S | Not used on default mounting option |
Pinout Table EVEN pins declaration[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Voltage domain | Type | Note | Pin MUX alternative functions |
| J1.2 | WIFI_EN | WLAN Enable | 3.3V | I | |||
| J1.4 | WIFI_IRQ | WLAN Interrupt Request | 3.3V | O | |||
| J1.6 | BT_F2 | Bluetooth Wakeup | 3.3V | I | Please leave unconnected | ||
| J1.8 | WIFI_CLK_REQ(A) | HOST_WakeUp | 3.3V | O | Please leave unconnected | ||
| J1.10 | NC | Reserved for future use | - | Please leave unconnected | |||
| J1.12 | NC | Reserved for future use | - | Please leave unconnected | |||
| J1.14 | AUDIO_I2S_SDO | Reserved for future use | - | Please leave unconnected | |||
| J1.16 | AUDIO_I2S_SCK | Reserved for future use | - | Please leave unconnected | |||
| J1.18 | AUDIO_I2S_WS | Reserved for future use | - | Please leave unconnected | |||
| J1.20 | AUDIO_I2S_SDI | Reserved for future use | - | Please leave unconnected. | |||
| J1.22 | DGND | Ground | - | G | |||
| J1.24 | SDIO_CLK | SDIO Clock | 3.3V | I | |||
| J1.26 | DGND | Ground | - | G | |||
| J1.28 | 3.3V | +3.3V Input Voltage | 3.3V | S | |||
| J1.30 | 5V | +5V Input Voltage | 5V | S | Not used on default mounting option |
