Difference between revisions of "DESK-MX8M-L/Peripherals/SD"
| (15 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
!colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History | !colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History | ||
|- | |- | ||
| − | |||
!style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Issue Date | !style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Issue Date | ||
!style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Notes | !style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Notes | ||
|- | |- | ||
| − | |style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"| | + | |style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|{{oldid|15715|2022/02/17}} |
| − | | | + | |style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|First DESK-MX8M-L release |
| − | |style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|First DESK-MX8M release | ||
|- | |- | ||
| − | |style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"| | + | | style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000" |{{oldid|17556|2023/02/24}} |
| − | | | + | | style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000" |DESK-MX8M-L-2.0.0 release |
| − | |style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|DESK-MX8M-L-2.0.0 release | ||
|- | |- | ||
| + | | style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000" |{{oldid|19170|2023/08/22}} | ||
| + | | style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000" |DESK-MX8M-L-4.0.0 release | ||
| + | |- | ||
| + | ! style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#ededed; padding:5px; color:#000000" |2024/04/11 | ||
| + | ! style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#ededed; padding:5px; color:#000000" |DESK-MX8M-L-4.1.0 release | ||
|- | |- | ||
|} | |} | ||
| Line 25: | Line 27: | ||
''N.B.'' The USDHC interface is re-configured on carrier device tree because of the ''Card Detect'' pin (which is related to the real board hardware implementation). | ''N.B.'' The USDHC interface is re-configured on carrier device tree because of the ''Card Detect'' pin (which is related to the real board hardware implementation). | ||
| − | ==== ORCA ==== | + | ==== ORCA SOM ==== |
Here below an example of device tree configuration used on standard DAVE's kit for the ORCA SOM: | Here below an example of device tree configuration used on standard DAVE's kit for the ORCA SOM: | ||
| Line 40: | Line 42: | ||
</pre> | </pre> | ||
| − | From <code>imx8mp-mito8mplus | + | From <code>imx8mp-mito8mplus.dtsi</code>: |
<pre> | <pre> | ||
| Line 70: | Line 72: | ||
Here below an example of device tree configuration used on standard DAVE's kit for the MITO 8M Mini SOM: | Here below an example of device tree configuration used on standard DAVE's kit for the MITO 8M Mini SOM: | ||
| − | From <code>imx8mm-mito8mmini.dts </code>: | + | From <code>imx8mm-mito8mmini-sbcx.dts </code>: |
<pre> | <pre> | ||
| Line 94: | Line 96: | ||
>; | >; | ||
}; | }; | ||
| + | ... | ||
| + | ... | ||
| + | </pre> | ||
| + | From <code>imx8mm-mito8mmini.dtsi</code>: | ||
| + | <pre> | ||
| + | ... | ||
| + | ... | ||
| + | &iomuxc { | ||
| + | ... | ||
| + | ... | ||
pinctrl_usdhc2: usdhc2grp { | pinctrl_usdhc2: usdhc2grp { | ||
fsl,pins = < | fsl,pins = < | ||
| Line 110: | Line 122: | ||
</pre> | </pre> | ||
| − | ===Accessing the peripheral=== | + | ===Accessing the peripheral in ORCA SOM=== |
| − | Once initialized, the SD device is mapped to the standard <code>/dev/ | + | Once initialized, the SD device is mapped to the standard <code>/dev/mmcblk1pX</code> block device, depending on how many partition are created on the SD card. |
====Linux messages at boot time==== | ====Linux messages at boot time==== | ||
| Line 121: | Line 133: | ||
... | ... | ||
... | ... | ||
| − | [ 1. | + | [ 1.282690] sdhci: Secure Digital Host Controller Interface driver |
| − | [ 1. | + | [ 1.288886] sdhci: Copyright(c) Pierre Ossman |
| − | [ 1. | + | [ 1.300778] sdhci-pltfm: SDHCI platform and OF driver helper |
| − | [ 1. | + | ... |
| − | [ 1. | + | ... |
| + | [ 1.339697] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA | ||
| + | [ 1.443523] mmc2: new HS400 Enhanced strobe MMC card at address 0001 | ||
| + | [ 1.451490] mmcblk2: mmc2:0001 DG4008 7.28 GiB | ||
| + | [ 1.458874] mmcblk2: p1 p2 | ||
| + | [ 1.463171] mmcblk2boot0: mmc2:0001 DG4008 4.00 MiB | ||
| + | [ 1.469396] mmcblk2boot1: mmc2:0001 DG4008 4.00 MiB | ||
| + | [ 1.475225] mmcblk2rpmb: mmc2:0001 DG4008 4.00 MiB, chardev (234:0) | ||
| + | [ 2.295899] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO | ||
| + | [ 2.332175] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA | ||
| + | [ 2.392913] mmc1: host does not support reading read-only switch, assuming write-enable | ||
| + | [ 2.413335] mmc1: new high speed SDHC card at address e624 | ||
| + | [ 2.421697] mmcblk1: mmc1:e624 SA32G 29.7 GiB | ||
| + | [ 2.437619] mmcblk1: p1 p2 | ||
| + | [ 2.482754] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA | ||
| + | [ 2.581058] mmc0: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes) | ||
| + | [ 2.646670] mmc0: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes) | ||
| + | [ 2.661025] mmc0: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes) | ||
| + | [ 2.670231] mmc0: queuing unknown CIS tuple 0x14 [] (0 bytes) | ||
| + | [ 2.698070] mmc0: new high speed SDIO card at address 0001 | ||
... | ... | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
... | ... | ||
| − | [ | + | [ 3.459672] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. |
| − | [ | + | [ 5.948716] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null). Quota mode: none. |
| − | [ | + | [ 8.732777] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. |
| − | [ | + | [ 8.888051] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. |
| − | [ | + | ... |
| + | ... | ||
| + | </pre> | ||
| + | |||
| + | ===Accessing the peripheral in MITO 8M Mini=== | ||
| + | |||
| + | Once initialized, the SD device is mapped to the standard <code>/dev/mmcblk1pX</code> block device, depending on how many partition are created on the SD card. | ||
| + | |||
| + | ====Linux messages at boot time==== | ||
| + | |||
| + | If the microSd card is inserted at boot time, the kernel - once the USDHC interface has been initialized - prints the device information and the partition detected like ''p1'', ''p2'', etc.: | ||
| + | |||
| + | <pre class="workstation-terminal"> | ||
| + | ... | ||
| + | ... | ||
| + | [ 1.379522] sdhci: Secure Digital Host Controller Interface driver | ||
| + | [ 1.385730] sdhci: Copyright(c) Pierre Ossman | ||
| + | [ 1.397234] sdhci-pltfm: SDHCI platform and OF driver helper | ||
| + | ... | ||
| + | ... | ||
| + | [ 1.435202] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA | ||
| + | [ 1.539279] mmc0: new HS400 Enhanced strobe MMC card at address 0001 | ||
| + | [ 1.547131] mmcblk0: mmc0:0001 DG4008 7.28 GiB | ||
| + | [ 1.553521] mmcblk0boot0: mmc0:0001 DG4008 4.00 MiB | ||
| + | [ 1.559975] mmcblk0boot1: mmc0:0001 DG4008 4.00 MiB | ||
| + | [ 1.569632] mmcblk0rpmb: mmc0:0001 DG4008 4.00 MiB, chardev (234:0) | ||
| + | [ 3.066839] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO | ||
| + | [ 3.105414] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA | ||
| + | [ 3.146851] mmc1: host does not support reading read-only switch, assuming write-enable | ||
| + | [ 3.165466] mmc1: new high speed SDHC card at address 1234 | ||
| + | [ 3.171447] mmcblk1: mmc1:1234 SA32G 28.9 GiB | ||
| + | [ 3.178028] mmcblk1: p1 p2 | ||
| + | [ 3.261067] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA | ||
| + | [ 3.304829] mmc2: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes) | ||
| + | [ 3.331827] mmc2: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes) | ||
| + | [ 3.347607] mmc2: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes) | ||
| + | [ 3.361278] mmc2: queuing unknown CIS tuple 0x14 [] (0 bytes) | ||
| + | [ 3.394876] mmc2: new high speed SDIO card at address 0001 | ||
| + | ... | ||
| + | ... | ||
| + | [ 3.450627] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. | ||
| + | [ 6.088500] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null). Quota mode: none. | ||
... | ... | ||
... | ... | ||
| − | |||
| − | |||
</pre> | </pre> | ||
| Line 150: | Line 215: | ||
root@desk-mx8mp:~# mkdir -p /mnt/boot | root@desk-mx8mp:~# mkdir -p /mnt/boot | ||
root@desk-mx8mp:~# mkdir -p /mnt/rfs | root@desk-mx8mp:~# mkdir -p /mnt/rfs | ||
| − | root@desk-mx8mp:~# mount /dev/ | + | root@desk-mx8mp:~# mount /dev/mmcblk1p1 /mnt/boot/ |
| − | root@desk-mx8mp:~# mount /dev/ | + | root@desk-mx8mp:~# mount /dev/mmcblk1p2 /mnt/rfs/ |
| + | root@desk-mx8mp:~# ls /mnt/boot/ | ||
| + | Image boot.scr imx8mp-mito8mplus-cb1001.dtb imx8mp-mito8mplus-cb1004.dtb imx8mp-mito8mplus-cb1005.dtb imx8mp-mito8mplus-cb1008.dtb splash_image.bmp stress_m7.bin tee.bin | ||
| + | root@desk-mx8mp:~# ls /mnt/rfs/ | ||
| + | bin boot dev etc home lib lost+found media mnt opt proc run sbin srv sys tmp unit_tests usr var | ||
root@desk-mx8mp:~# | root@desk-mx8mp:~# | ||
</pre> | </pre> | ||
and then the mounted partition are available on the ''/mnt/boot'' and ''/mnt/rfs'' root file system directories. | and then the mounted partition are available on the ''/mnt/boot'' and ''/mnt/rfs'' root file system directories. | ||
| + | |||
| + | This instruction can be performed both on ORCA and MITO 8M MINI. | ||
---- | ---- | ||
| − | [[Category:ORCA]] | + | [[Category:ORCA]] [[Category:MITO 8M Mini]] |
Latest revision as of 13:39, 15 April 2024
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| First DESK-MX8M-L release | |||
| DESK-MX8M-L-2.0.0 release | |||
| DESK-MX8M-L-4.0.0 release | |||
| 2024/04/11 | DESK-MX8M-L-4.1.0 release | ||
Contents
Peripheral SD[edit | edit source]
Device tree configuration[edit | edit source]
N.B. The USDHC interface is re-configured on carrier device tree because of the Card Detect pin (which is related to the real board hardware implementation).
ORCA SOM[edit | edit source]
Here below an example of device tree configuration used on standard DAVE's kit for the ORCA SOM:
From imx8mp-mito8mplus-cb1001.dts:
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
From imx8mp-mito8mplus.dtsi:
&iomuxc {
...
...
pinctrl_usdhc2_gpio: usdhc2grp-gpio {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
>;
};
...
...
};
MITO 8M Mini[edit | edit source]
Here below an example of device tree configuration used on standard DAVE's kit for the MITO 8M Mini SOM:
From imx8mm-mito8mmini-sbcx.dts :
...
...
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
no-1-8-v;
bus-width = <4>;
status = "okay";
};
...
...
&iomuxc {
...
...
pinctrl_usdhc2_gpio: usdhc2grpgpio {
fsl,pins = <
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x159
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
...
...
From imx8mm-mito8mmini.dtsi:
...
...
&iomuxc {
...
...
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
>;
};
...
...
};
Accessing the peripheral in ORCA SOM[edit | edit source]
Once initialized, the SD device is mapped to the standard /dev/mmcblk1pX block device, depending on how many partition are created on the SD card.
Linux messages at boot time[edit | edit source]
If the microSd card is inserted at boot time, the kernel - once the USDHC interface has been initialized - prints the device information and the partition detected like p1, p2, etc.:
... ... [ 1.282690] sdhci: Secure Digital Host Controller Interface driver [ 1.288886] sdhci: Copyright(c) Pierre Ossman [ 1.300778] sdhci-pltfm: SDHCI platform and OF driver helper ... ... [ 1.339697] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA [ 1.443523] mmc2: new HS400 Enhanced strobe MMC card at address 0001 [ 1.451490] mmcblk2: mmc2:0001 DG4008 7.28 GiB [ 1.458874] mmcblk2: p1 p2 [ 1.463171] mmcblk2boot0: mmc2:0001 DG4008 4.00 MiB [ 1.469396] mmcblk2boot1: mmc2:0001 DG4008 4.00 MiB [ 1.475225] mmcblk2rpmb: mmc2:0001 DG4008 4.00 MiB, chardev (234:0) [ 2.295899] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO [ 2.332175] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 2.392913] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.413335] mmc1: new high speed SDHC card at address e624 [ 2.421697] mmcblk1: mmc1:e624 SA32G 29.7 GiB [ 2.437619] mmcblk1: p1 p2 [ 2.482754] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA [ 2.581058] mmc0: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes) [ 2.646670] mmc0: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes) [ 2.661025] mmc0: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes) [ 2.670231] mmc0: queuing unknown CIS tuple 0x14 [] (0 bytes) [ 2.698070] mmc0: new high speed SDIO card at address 0001 ... ... [ 3.459672] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.948716] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null). Quota mode: none. [ 8.732777] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 8.888051] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. ... ...
Accessing the peripheral in MITO 8M Mini[edit | edit source]
Once initialized, the SD device is mapped to the standard /dev/mmcblk1pX block device, depending on how many partition are created on the SD card.
Linux messages at boot time[edit | edit source]
If the microSd card is inserted at boot time, the kernel - once the USDHC interface has been initialized - prints the device information and the partition detected like p1, p2, etc.:
... ... [ 1.379522] sdhci: Secure Digital Host Controller Interface driver [ 1.385730] sdhci: Copyright(c) Pierre Ossman [ 1.397234] sdhci-pltfm: SDHCI platform and OF driver helper ... ... [ 1.435202] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA [ 1.539279] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.547131] mmcblk0: mmc0:0001 DG4008 7.28 GiB [ 1.553521] mmcblk0boot0: mmc0:0001 DG4008 4.00 MiB [ 1.559975] mmcblk0boot1: mmc0:0001 DG4008 4.00 MiB [ 1.569632] mmcblk0rpmb: mmc0:0001 DG4008 4.00 MiB, chardev (234:0) [ 3.066839] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO [ 3.105414] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 3.146851] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.165466] mmc1: new high speed SDHC card at address 1234 [ 3.171447] mmcblk1: mmc1:1234 SA32G 28.9 GiB [ 3.178028] mmcblk1: p1 p2 [ 3.261067] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA [ 3.304829] mmc2: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes) [ 3.331827] mmc2: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes) [ 3.347607] mmc2: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes) [ 3.361278] mmc2: queuing unknown CIS tuple 0x14 [] (0 bytes) [ 3.394876] mmc2: new high speed SDIO card at address 0001 ... ... [ 3.450627] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 6.088500] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null). Quota mode: none. ... ...
Additional information[edit | edit source]
If the root file system configuration does not automatically mount the partition, it is possible to mount the device using the following command:
root@desk-mx8mp:~# mkdir -p /mnt/boot root@desk-mx8mp:~# mkdir -p /mnt/rfs root@desk-mx8mp:~# mount /dev/mmcblk1p1 /mnt/boot/ root@desk-mx8mp:~# mount /dev/mmcblk1p2 /mnt/rfs/ root@desk-mx8mp:~# ls /mnt/boot/ Image boot.scr imx8mp-mito8mplus-cb1001.dtb imx8mp-mito8mplus-cb1004.dtb imx8mp-mito8mplus-cb1005.dtb imx8mp-mito8mplus-cb1008.dtb splash_image.bmp stress_m7.bin tee.bin root@desk-mx8mp:~# ls /mnt/rfs/ bin boot dev etc home lib lost+found media mnt opt proc run sbin srv sys tmp unit_tests usr var root@desk-mx8mp:~#
and then the mounted partition are available on the /mnt/boot and /mnt/rfs root file system directories.
This instruction can be performed both on ORCA and MITO 8M MINI.
