DESK-MX8M-L/Development/Building U-Boot
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Jan 2022 | First DESK-MX8M release | |
Building U-Boot[edit | edit source]
Quick reference[edit | edit source]
| Repository Information | |
|---|---|
| URL | git@git.dave.eu:desk-mx-l/u-boot-imx.git |
| stable branch | desk-mx-l |
| stable tag | desk-mx-l-2.x.x |
| U-Boot defconfigs | |||
|---|---|---|---|
| Platform | SOM ConfigID | CB ConfigID | defconfig |
| SBCX | 0x00000002 | 0x00001003 | imx8mm_mito8mmini_defconfig |
| SBC ORCA | 0x00000005 | 0x00001001 | imx8mp_mito8mplus_defconfig |
Instructions[edit | edit source]
It is assumed that the development environment has been set up properly as described here.
- start the Linux development VM and login into the system
- open a terminal window and cd into U-Boot source code
cd desk-mx-l/u-boot
- in case of needs you can update your local repository with the following git command
git pull
- checkout the required branch
git checkout desk-mx8m-l-rel-2.0.0
- configure the build environment
source /home/dvdk/desk-mx-l/desk-mx8m-l-2.0.0-rc2_env.sh
- enter the source tree directory and run the following commands (please refer to the U-Boot defconfigs table above):
For ORCA
make imx8mp_mito8mplus_defconfig make
For MITO 8M Mini
make imx8mm_mito8mmini_defconfig make
Binary files can be copied to the tftp root directory /tftpboot/desk-mx-l/ with the following command:
cp spl/u-boot-spl.bin /tftpboot/desk-mx-l/ cp u-boot.bin /tftpboot/desk-mx-l/
Please refer to this page for more information on how to update the bootloader on your board.
