Creating and building example Vivado project (BELK/BXELK)
Revision as of 10:02, 28 October 2015 by U0001 (talk | contribs) (Created page with "The following sections describe how to perform the most common tasks for building the software components for a BORA/BORAX-based embedded system. ==Creating and building a Zyn...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
The following sections describe how to perform the most common tasks for building the software components for a BORA/BORAX-based embedded system.
Creating and building a Zynq project for BORA using the command line[edit | edit source]
- start the Zynq development server and login into the system
- assuming that a local repository has not been created, clone the remote BORA git repository:
git clone git@git.dave.eu:dave/bora/bora.git
- copy the
<bora_repo>/boards/board_parts/zynq/BELK_2.2.0directory to<vivado_2014.4_install_dir>/data/boards/board_parts/zynq/:<cd <bora_repo>
sudo cp -r boards/board_parts/zynq/BELK_2.2.0 /opt/Xilinx/Vivado/2014.4/data/boards/board_parts/zynq//pre>
- enter the git directory and launch the following command
- <pre>
export PROJ_DIR=$(pwd)/../bora-build-YYYYMMDD-nobk
- launch the Vivado Design Suite with the following commands:
