Difference between revisions of "Bootstrap settings (NaonEVB-Mid)"
DevWikiAdmin (talk | contribs) (Created page with "{{InfoBoxTop}} {{Applies To NaonEVB-Mid}} {{InfoBoxBottom}} === Dip Switch settings === Bootstrap setting on Category:NaonEVB-Mid can be changed by using S5/S6/S7 dip s...") |
DevWikiAdmin (talk | contribs) m (→Examples) |
||
| Line 65: | Line 65: | ||
| − | To configure the [[Bootstrap settings (NaonEVB-Lite)|default NaonEVB-Lite boot sequence]] change the dip switch as follows | + | To configure the same configuration as [[Bootstrap settings (NaonEVB-Lite)|default NaonEVB-Lite boot sequence]], change the dip switch as follows |
Revision as of 14:36, 22 April 2013
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Dip Switch settings[edit | edit source]
Bootstrap setting on can be changed by using S5/S6/S7 dip switch. Those switch changes BTMODE[4:0] accordingly with the following table.
| DIP SWITCH | OFF Position | ON Position |
|---|---|---|
| S5.1 | BTMODE0=1 | BTMODE0=0 |
| S5.2 | BTMODE1=1 | BTMODE1=0 |
| S6.1 | BTMODE2=1 | BTMODE2=0 |
| S6.2 | BTMODE3=1 | BTMODE3=0 |
| S7.1 | BTMODE4=1 | BTMODE4=0 |
Please note that S7.2 is RFU - that stands for "Reserved for future use" - and must not be selected.
Examples[edit | edit source]
To configure the default boot sequence change the dip switch as follows
| DIP SWITCH | Position |
|---|---|
| S5.1 | OFF |
| S5.2 | OFF |
| S6.1 | OFF |
| S6.2 | ON |
| S7.1 | OFF |
| S7.2 | OFF |
To configure the same configuration as default NaonEVB-Lite boot sequence, change the dip switch as follows
| DIP SWITCH | Position |
|---|---|
| S5.1 | ON |
| S5.2 | OFF |
| S6.1 | ON |
| S6.2 | ON |
| S7.1 | ON |
| S7.2 | OFF |
