BORA Xpress SOM/BXELK-L/General/Booting from NFS
< BORA Xpress SOM | BXELK-L
Revision as of 09:48, 23 November 2021 by U0007 (talk | contribs) (Created page with "<section begin=Body/> {{#lst:Booting_the_system_via_NFS_(BELK/BXELK)|BELK}} <section end=Body/>")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Booting the system via NFS[edit | edit source]
It is assumed that the development environment has been set up properly as described here.
Assuming that:
- the CPU module is booting with a working FSBL (or U-boot SPL for BELK-4.0.0/BXELK-2.0.0) and U-Boot image (either from flash NOR SPI or flash NAND or MicroSD card)
- a kernel image is available and ready to be downloaded through tftp
- the root file system has been uncompressed into a nfs share
the system can boot using the net_nfs[a] configuration, as described here.
- ↑ The net_nfs configuration, besides setting the system for booting from the network, triggers a command (
program_fpga) which loads the FPGA binary from TFTP and programs the bitstream.
