BORA Xpress SOM/BORA Xpress Hardware/Peripherals/UART
< BORA Xpress SOM | BORA Xpress Hardware
Revision as of 10:48, 22 November 2021 by U0007 (talk | contribs) (Created page with "{{#lst:Processing_system_peripherals_(BORAXpress)|UART1}}")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
The UART controller is a full-duplex asynchronous receiver and transmitter that supports a wide range of programmable baud rates and I/O signal formats. UART1 port is routed to the SOM connectors as a 2-wire interface. The following table describes the interface signals:
| Pin name | Conn. pin | Function | Notes |
|---|---|---|---|
| PS_UART1_RX | J1.80 | UART Receive line | - |
| PS_UART1_TX | J1.82 | UART Transmit line | - |
