BORA Xpress SOM/BORA Xpress Evaluation Kit/Interfaces and Connectors/USB OTG
< BORA Xpress SOM | BORA Xpress Evaluation Kit
Revision as of 12:03, 22 November 2021 by U0007 (talk | contribs) (Created page with "<section begin=Body/> == Power Supply == {{#lst:BoraXEVB|USB}} <section end=Body/>")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Power Supply[edit | edit source]
USB OTG - J19[edit | edit source]
J19 is a standard USB MICRO AB connector. It is connected to the BORA Xpress USB 2.0 OTG peripheral. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | USB_OTG_VBUS | - | - |
| 2 | USBM1 | - | - |
| 3 | USBP1 | - | - |
| 4 | OTG_ID | - | - |
| 5 | USB_OTG_DGND | - | - |
| 6, 7, 8, 9 | USB_OTG_SHIELD | - | - |
