BORA SOM/BORA Hardware/Peripherals/CAN
< BORA SOM | BORA Hardware
Revision as of 07:12, 28 October 2021 by U0007 (talk | contribs) (Created page with "{{#lst:Processing_system_peripherals_(Bora) | CAN}}")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
CAN port is connected to on-board transceiver (TI SN65HVD232) which converts the single-ended CAN signals of the controller to the differential signals of the physical layer. The following table describes the interface signals:
| Pin name | Conn. pin | Function | Notes |
|---|---|---|---|
| CAN_H | J2.107 | High bus output | - |
| CAN_L | J2.105 | Low bus output | - |
Optionally, the on-board PHY can be excluded (for example, to use an external PHY on the carrier board) and the single-ended CAN signals are routed to the connectors. The following table describes the interface signals:
| Pin name | Conn. pin | Function | Notes |
|---|---|---|---|
| CAN_RX | J2.35 | Receive data pin | Routed to EMIO (pin IO_L19P_T3_34) |
| CAN_TX | J2.9 | Transmit data pin | Routed to EMIO (pin IO_L6P_T0_34) |
Please contact our Sales Department for more information about this hardware option.
