BELK-TN-008: Integrating Visual Studio Code and Lauterbach PowerView TRACE32

From DAVE Developer's Wiki
Revision as of 16:26, 12 February 2020 by U0001 (talk | contribs)

Jump to: navigation, search
HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services
Info Box
Bora5-small.jpg Applies to Bora
BORA Xpress.png Applies to BORA Xpress
BORALite-TOP.png Applies to BORA Lite


Warning-icon.png This technical note was validated against specific versions of hardware and software. What is described here may not work with other versions. Warning-icon.png

History[edit | edit source]

Version Date Notes
1.0.0 February 2020 First public release

Introduction[edit | edit source]

This Technical Note (TN) shows how to integrate Visual Studio Code (VSC) and Lauterbach PowerView TRACE32 (PVT32). The integration aims to:

  • Debugging the program in VSC by using PVT32 to run it on the target
  • To jump from PVT32 to VSC (in editing mode) to edit the source file where the bug was found.

This article also shows how to configure VSC in order to cross-build a Makefile-based application. This configuration supports cross-toolchain error messages to jump on erroneous lines with a simple click.

HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services
Retrieved from "https://wiki.dave.eu/index.php?title=BELK-TN-008:_Integrating_Visual_Studio_Code_and_Lauterbach_PowerView_TRACE32&oldid=9542"