Difference between revisions of "AxelEVB-Lite"
DevWikiAdmin (talk | contribs) m (→J1) |
DevWikiAdmin (talk | contribs) m |
||
| Line 759: | Line 759: | ||
=== J2 === | === J2 === | ||
| − | J2 is a 140-pin header connector. The following tables | + | |
| + | J2 is a Hirose FX8C-140P-SV4 140-pin header connector for the hosted Axel SoM. The following tables reports the connector's pinout: | ||
| + | |||
==== J2 odd pins (1 to 139) ==== | ==== J2 odd pins (1 to 139) ==== | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 1,479: | Line 1,481: | ||
=== J3 === | === J3 === | ||
| − | J3 is a 140-pin header connector. The following tables | + | |
| + | J3 is a Hirose FX8C-140P-SV4 140-pin header connector for the hosted Axel SoM. The following tables reports the connector's pinout: | ||
| + | |||
==== J3 odd pins (1 to 139) ==== | ==== J3 odd pins (1 to 139) ==== | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 2,199: | Line 2,203: | ||
=== J4 === | === J4 === | ||
| − | J4 is a 140-pin receptacle | + | |
| + | J4 is a Hirose FX8C-140S-SV5 140-pin receptacle for the connection to the Dacu carrier bord. The following tables reports the connector's pinout: | ||
| + | |||
==== J4 odd pins (1 to 139) ==== | ==== J4 odd pins (1 to 139) ==== | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 2,919: | Line 2,925: | ||
=== J5 === | === J5 === | ||
| − | J5 is a 140-pin receptacle | + | |
| + | J5 is a Hirose FX8C-140S-SV5 140-pin receptacle for the connection to the Dacu carrier bord. The following tables reports the connector's pinout: | ||
| + | |||
==== J5 odd pins (1 to 139) ==== | ==== J5 odd pins (1 to 139) ==== | ||
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 13:38, 31 March 2014
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
|
The information here provided are preliminary and subject to change. |
|
Contents
- 1 Introduction
- 2 Block Diagram
- 3 Features
- 4 Known limitations
- 5 Connectors pinout
- 5.1 J1
- 5.2 J2
- 5.3 J3
- 5.4 J4
- 5.5 J5
- 5.6 Ethernet port ETH - J6
- 5.7 PCI Express - J7
- 5.8 HDMI - J8
- 5.9 LVDS1 - J10
- 5.10 Backlight LCD - J11
- 5.11 J12
- 5.12 MLB - J13
- 5.13 CAM interface - J16
- 5.14 USB - J26
- 5.15 UART3 - J28
- 5.16 USB OTG - J29
- 5.17 SOM Power Voltage Selector - J32
- 5.18 J33
- 5.19 J34
- 5.20 J36
- 5.21 J40
- 5.22 J42
- 5.23 IPU2_CSI1 (Generic Camera in) - J43
- 5.24 EXPANSION CONNECTOR - J44
- 5.25 EXPANSION CONNECTOR - J46
- 5.26 LVDS0 - J48
- 5.27 IPU1_CSI0 (1/2) - J50
- 5.28 IPU1_CSI0 (2/2) - J51
- 5.29 MicroSD - J52
- 5.30 Pin strip connectors
- 5.30.1 J-PROG-MICRO1
- 5.30.2 J-PROG-PMIC1
- 5.30.3 J-SEL-PROG1
- 5.30.4 SATA - JP1
- 5.30.5 SOM CONSUMPTION MONITOR - JP2
- 5.30.6 NVCC_CSI selection - JP3
- 5.30.7 NVCC_EIM selection - JP4
- 5.30.8 NVCC_SD3 selection - JP5
- 5.30.9 NVCC_LCD selection - JP6
- 5.30.10 MIPI CSI - JP7
- 5.30.11 EXPANSION CONNECTOR - JP8
- 5.30.12 EXPANSION CONNECTOR - JP9
- 5.30.13 JP10
- 5.30.14 MIPI DSI - JP11
- 6 Schematics
- 7 BOM
- 8 Layout
- 9 Mechanical
Introduction[edit | edit source]
AxelEVB-Lite is a carrier board designed to host Axel system-on-module. It exports some specific peripherals connectors and acts as an adaptation board used in combination with Dacu carrier board.
Block Diagram[edit | edit source]
The following picture shows Axel-EVB-Lite's block diagram:
Features[edit | edit source]
- 10/100/1000 Ethernet
- 1x USB OTG
- Serial port (RS232)
- JTAG
- HDMI connector
- SATA connector
- PCIe connector
- LVDS connector
- Pin strip expansion connectors
Known limitations[edit | edit source]
Connectors pinout[edit | edit source]
J1[edit | edit source]
J1 is a Hirose FX8C-140P-SV4 140-pin header connector for the hosted Axel SoM. The following tables reports the connector's pinout:
J1 odd pins (1 to 139)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J1.1 | DGND | Ground | - |
| J1.3 | DI0_DISP_CLK | Digital video: pixel clock | - |
| J1.5 | DI0_PIN2 | Digital video: Hsync | - |
| J1.7 | DI0_PIN3 | Digital video: Vsync | - |
| J1.9 | DI0_PIN4 | Digital video: Contrast | - |
| J1.11 | DI0_PIN15 | Digital video: Data Enable | - |
| J1.13 | DISP0_DAT0 | Digital video: data-bit[0] | - |
| J1.15 | DISP0_DAT1 | Digital video: data-bit[1] | - |
| J1.17 | DISP0_DAT2 | Digital video: data-bit[2] | - |
| J1.19 | DISP0_DAT3 | Digital video: data-bit[3] | - |
| J1.21 | DGND | Ground | - |
| J1.23 | DISP0_DAT4 | Digital video: data-bit[4] | - |
| J1.25 | DISP0_DAT5 | Digital video: data-bit[5] | - |
| J1.27 | DISP0_DAT6 | Digital video: data-bit[6] | - |
| J1.29 | DISP0_DAT7 | Digital video: data-bit[7] | - |
| J1.31 | DISP0_DAT8 | Digital video: data-bit[8] | - |
| J1.33 | DISP0_DAT9 | Digital video: data-bit[9] | - |
| J1.35 | DISP0_DAT10 | Digital video: data-bit[10] | - |
| J1.37 | DISP0_DAT11 | Digital video: data-bit[11] | - |
| J1.39 | DISP0_DAT12 | Digital video: data-bit[12] | - |
| J1.41 | DGND | Ground | - |
| J1.43 | DISP0_DAT13 | Digital video: data-bit[13] | - |
| J1.45 | DISP0_DAT14 | Digital video: data-bit[14] | - |
| J1.47 | DISP0_DAT15 | Digital video: data-bit[15] | - |
| J1.49 | DISP0_DAT16 | Digital video: data-bit[16] | - |
| J1.51 | DISP0_DAT17 | Digital video: data-bit[17] | - |
| J1.53 | DISP0_DAT18 | Digital video: data-bit[18] | - |
| J1.55 | DISP0_DAT19 | Digital video: data-bit[19] | - |
| J1.57 | DISP0_DAT20 | Digital video: data-bit[20] | - |
| J1.59 | DISP0_DAT21 | Digital video: data-bit[21] | - |
| J1.61 | DGND | Ground | - |
| J1.63 | DISP0_DAT22 | Digital video: data-bit[22] | - |
| J1.65 | DISP0_DAT23 | Digital video: data-bit[23] | - |
| J1.67 | WD_SET0 | Watchdog control pin | - |
| J1.69 | WD_SET1 | Watchdog control pin | - |
| J1.71 | WD_SET2 | Watchdog control pin | - |
| J1.73 | USB_OTG_CHDn | N.C. | - |
| J1.75 | USB_OTG_VBUS | USB power supply (+5V) | - |
| J1.77 | USB_OTG_DN | USB Data - | - |
| J1.79 | USB_OTG_DP | USB Data + | - |
| J1.81 | DGND | Ground | - |
| J1.83 | USB_HOST_DP | USB Data + | - |
| J1.85 | USB_HOST_DN | USB Data - | - |
| J1.87 | USB_H1_VBUS | USB power supply (+5V) | - |
| J1.89 | SD1_DAT0 | - | - |
| J1.91 | SD1_DAT1 | - | - |
| J1.93 | SD1_DAT2 | - | - |
| J1.95 | SD1_DAT3 | - | - |
| J1.97 | SD1_CMD | - | - |
| J1.99 | SD1_CLK | - | - |
| J1.101 | DGND | Ground | - |
| J1.103 | TAMPER | CPU Tamper signal | - |
| J1.105 | ETH0_LED1 | yellow led of LAN connector on EVBA (J6) | - |
| J1.107 | ETH0_LED2 | green led of LAN connector on EVBA (J6) | - |
| J1.109 | DGND | Ground | - |
| J1.111 | ETH0_TXRX0_M | Ethernet 0 TD0- | - |
| J1.113 | ETH0_TXRX0_P | Ethernet 0 TD0+ | - |
| J1.115 | DGND | Ground | - |
| J1.117 | ETH0_TXRX1_M | Ethernet 0 TD1- | - |
| J1.119 | ETH0_TXRX1_P | Ethernet 0 TD1+ | - |
| J1.121 | DGND | Ground | - |
| J1.123 | ETH0_TXRX2_M | Ethernet 0 TD2- | - |
| J1.125 | ETH0_TXRX2_P | Ethernet 0 TD2+ | - |
| J1.127 | DGND | Ground | - |
| J1.129 | ETH0_TXRX3_M | Ethernet 0 TD3- | - |
| J1.131 | ETH0_TXRX3_P | Ethernet 0 TD3+ | - |
| J1.133 | DGND | Ground | - |
| J1.135 | RGMII_MDC | - | - |
| J1.137 | RGMII_MDIO | - | - |
| J1.139 | PMIC_VSNVS | - | - |
J1 even pins (2 to 140)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J1.2 | LVDS0_TX0_N | LVDS0 pair0 negative | - |
| J1.4 | LVDS0_TX0_P | LVDS0 pair0 positive | - |
| J1.6 | LVDS0_TX1_N | LVDS0 pair1 negative | - |
| J1.8 | LVDS0_TX1_P | LVDS0 pair1 positive | - |
| J1.10 | DGND | Ground | - |
| J1.12 | LVDS0_TX2_N | LVDS0 pair2 negative | - |
| J1.14 | LVDS0_TX2_P | LVDS0 pair2 positive | - |
| J1.16 | LVDS0_TX3_N | LVDS0 pair3 negative | - |
| J1.18 | LVDS0_TX3_P | LVDS0 pair3 positive | - |
| J1.20 | LVDS0_CLK_N | LVDS0 clock negative | - |
| J1.22 | LVDS0_CLK_P | LVDS0 clock positive | - |
| J1.24 | DGND | Ground | - |
| J1.26 | CSI0_MCLK | - | - |
| J1.28 | DGND | Ground | - |
| J1.30 | CSI0_PIXCLK | - | - |
| J1.32 | CSI0_VSYNC | - | - |
| J1.34 | CSI0_DATA_EN | - | - |
| J1.36 | CSI0_DAT4 | - | - |
| J1.38 | CSI0_DAT5 | - | - |
| J1.40 | CSI0_DAT6 | - | - |
| J1.42 | CSI0_DAT7 | - | - |
| J1.44 | CSI0_DAT8 | I2C bus 1 , DATA | - |
| J1.46 | CSI0_DAT9 | I2C bus 1 , CLOCK | - |
| J1.48 | CSI0_DAT10 | UART1 TX | - |
| J1.50 | DGND | Ground | - |
| J1.52 | CSI0_DAT11 | UART1 RX | - |
| J1.54 | CSI0_DAT12 | - | - |
| J1.56 | CSI0_DAT13 | - | - |
| J1.58 | CSI0_DAT14 | - | - |
| J1.60 | CSI0_DAT15 | - | - |
| J1.62 | CSI0_DAT16 | - | - |
| J1.64 | CSI0_DAT17 | - | - |
| J1.66 | CSI0_DAT18 | - | - |
| J1.68 | CSI0_DAT19 | - | - |
| J1.70 | DGND | Ground | - |
| J1.72 | GPIO_0 | SD Card Detect | - |
| J1.74 | GPIO_1 | WatchDog signal to reset PMIC | - |
| J1.76 | GPIO_2 | General Purpose I/O | Button S2 status |
| J1.78 | GPIO_3/I2C3_SCL | I2C bus 3 , CLOCK | - |
| J1.80 | GPIO_4 | General Purpose I/O | TouchScreen Pendown status<br>Button S4 status |
| J1.82 | GPIO_5 | General Purpose I/O | Button S3 status |
| J1.84 | GPIO_6/I2C3_SDA | I2C bus 3 , DATA | - |
| J1.86 | GPIO_7/FLEXCAN1_H | CAN bus 1 TX | - |
| J1.88 | GPIO_8/FLEXCAN1_L | CAN bus 1 RX | - |
| J1.90 | DGND | Ground | - |
| J1.92 | GPIO_9 | LCD0 Backlight (PWM) | - |
| J1.94 | GPIO_16 | General Purpose I/O | - |
| J1.96 | GPIO_17 | General Purpose I/O | - |
| J1.98 | GPIO_18/PMIC_INT_B | General Purpose I/O | - |
| J1.100 | GPIO_19 | General Purpose I/O | Button S1 status |
| J1.102 | KEY_COL0/ECSPI1_SCLK | SPI bus 1 Clock | - |
| J1.104 | KEY_ROW0/ECSPI1_MOSI | SPI bus 1 Master Out Slave In | - |
| J1.106 | KEY_COL1/ECSPI1_MISO | SPI bus 1 Master In Slave Out | - |
| J1.108 | KEY_ROW1/ECSPI1_SS0 | SPI bus 1 Chip select 0 | - |
| J1.110 | DGND | Ground | - |
| J1.112 | KEY_COL2/ECSP1_SS1 | SPI bus 1 Chip select 1 | - |
| J1.114 | KEY_ROW2 | General Purpose I/O | - |
| J1.116 | KEY_COL3/I2C2_SCL | I2C bus 2 , CLOCK | - |
| J1.118 | KEY_ROW3/I2C2_SDA | I2C bus 2 , DATA | - |
| J1.120 | VGEN4_1V8_I | 1.8V | - |
| J1.122 | NVCC_AXEL_I/O_3.3V/1.8V | 3.3/1.8V | - |
| J1.124 | RTC_VBAT | RTC Battery Power Supply | Battery on DACU board |
| J1.126 | PMIC_LICELL | - | - |
| J1.128 | SD2_CMD | Micro SD cmd | - |
| J1.130 | DGND | Ground | - |
| J1.132 | SD2_CLK | Micro SD clock | - |
| J1.134 | SD2_DATA0 | Micro SD data[0] | - |
| J1.136 | SD2_DATA1 | Micro SD data[1] | - |
| J1.138 | SD2_DATA2 | Micro SD data[2] | - |
| J1.140 | SD2_DATA3 | Micro SD data[3] | - |
J2[edit | edit source]
J2 is a Hirose FX8C-140P-SV4 140-pin header connector for the hosted Axel SoM. The following tables reports the connector's pinout:
J2 odd pins (1 to 139)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J2.1 | DGND | Ground | - |
| J2.3 | EIM_DA0 | Boot Mode Select | - |
| J2.5 | EIM_DA1 | Boot Mode Select | - |
| J2.7 | EIM_DA2 | Boot Mode Select | - |
| J2.9 | EIM_DA3 | Boot Mode Select | - |
| J2.11 | EIM_DA4 | Boot Mode Select | - |
| J2.13 | EIM_DA5 | Boot Mode Select | - |
| J2.15 | EIM_DA6 | Boot Mode Select | - |
| J2.17 | EIM_DA7 | Boot Mode Select | - |
| J2.19 | EIM_DA8 | Boot Mode Select | - |
| J2.21 | DGND | Ground | - |
| J2.23 | EIM_DA9 | Boot Mode Select | - |
| J2.25 | EIM_DA10 | Boot Mode Select | - |
| J2.27 | EIM_DA11 | Boot Mode Select | - |
| J2.29 | EIM_DA12 | Boot Mode Select | - |
| J2.31 | EIM_DA13 | Boot Mode Select | - |
| J2.33 | EIM_DA14 | Boot Mode Select | - |
| J2.35 | EIM_DA15 | Boot Mode Select | - |
| J2.37 | EIM_D16 | General Purpose I/O | - |
| J2.39 | EIM_D17 | - | - |
| J2.41 | DGND | Ground | - |
| J2.43 | EIM_D18 | - | - |
| J2.45 | EIM_D19 | - | - |
| J2.47 | EIM_D20 | - | - |
| J2.49 | EIM_D21 | - | - |
| J2.51 | EIM_D22 | - | - |
| J2.53 | EIM_D23 | - | - |
| J2.55 | EIM_D24 | UART3 TX | - |
| J2.57 | EIM_D25 | UART3 RX | - |
| J2.59 | EIM_D26 | - | - |
| J2.61 | DGND | Ground | - |
| J2.63 | EIM_D27 | - | - |
| J2.65 | EIM_D28 | - | - |
| J2.67 | EIM_D29 | - | - |
| J2.69 | EIM_D30 | - | - |
| J2.71 | EIM_D31 | - | - |
| J2.73 | EIM_A16 | Boot Mode Select | - |
| J2.75 | EIM_A17 | Boot Mode Select | - |
| J2.77 | EIM_A18 | Boot Mode Select | - |
| J2.79 | EIM_A19 | Boot Mode Select | - |
| J2.81 | DGND | Ground | - |
| J2.83 | EIM_A20 | Boot Mode Select | - |
| J2.85 | EIM_A21 | Boot Mode Select | - |
| J2.87 | EIM_A22 | Boot Mode Select | - |
| J2.89 | EIM_A23 | Boot Mode Select | - |
| J2.91 | EIM_A24 | Boot Mode Select | - |
| J2.93 | EIM_A25 | - | - |
| J2.95 | EIM_LBA | Boot Mode Select | - |
| J2.97 | EIM_OE | SPI bus 2 Master In Slave Out | - |
| J2.99 | EIM_RW | Boot Mode Select<br>SPI bus 2 Chip Select 0 | - |
| J2.101 | DGND | Ground | - |
| J2.103 | EIM_BCLK | - | - |
| J2.105 | EIM_WAIT | Boot Mode Select | - |
| J2.107 | EIM_EB0 | Boot Mode Select | - |
| J2.109 | EIM_EB1 | Boot Mode Select | - |
| J2.111 | EIM_EB2 | Boot Mode Select | - |
| J2.113 | EIM_EB3 | Boot Mode Select | - |
| J2.115 | EIM_CS0 | SPI bus 2 Clock | - |
| J2.117 | EIM_CS1 | SPI bus 2 Master Out Slave In | - |
| J2.119 | DGND | Ground | - |
| J2.121 | PMIC_PROG_VPGM | PMIC Control signal | - |
| J2.123 | PMIC_PROG_GATE_CTRL | PMIC Control signal | - |
| J2.125 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.127 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.129 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.131 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.133 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.135 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.137 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.139 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
J2 even pins (2 to 140)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J2.2 | NANDF_CS0_B | NAND Chip Enable 0 | - |
| J2.4 | NANDF_CS1_B | NAND Chip Enable 1 | - |
| J2.6 | NANDF_CS2_B | NAND Chip Enable 2 | - |
| J2.8 | NANDF_CS3_B | NAND Chip Enable 3 | - |
| J2.10 | DGND | Ground | - |
| J2.12 | NANDF_D0 | NAND Data-bit[0] | - |
| J2.14 | NANDF_D1 | NAND Data-bit[1] | - |
| J2.16 | NANDF_D2 | NAND Data-bit[2] | - |
| J2.18 | NANDF_D3 | NAND Data-bit[3] | - |
| J2.20 | NANDF_D4 | NAND Data-bit[4] | - |
| J2.22 | NANDF_D5 | NAND Data-bit[5] | - |
| J2.24 | NANDF_D6 | NAND Data-bit[6] | - |
| J2.26 | NANDF_D7 | NAND Data-bit[7] | - |
| J2.28 | SD4_CLK/NANDF_WE_B | NAND Write Enable | - |
| J2.30 | DGND | Ground | - |
| J2.32 | SD4_DATA0/NANDF_DQS | - | - |
| J2.34 | SD4_CMD/NANDF_RE_B | NAND Read Enable | - |
| J2.36 | NANDF_ALE | NAND Address Latch Enable | - |
| J2.38 | NANDF_CLE | NAND Command Latch Enable | - |
| J2.40 | NANDF_WP_B | NAND Write Protect | - |
| J2.42 | NANDF_RB0 | NAND Ready/Busy output | - |
| J2.44 | SD4_DATA1 | - | - |
| J2.46 | SD4_DATA2 | - | - |
| J2.48 | SD4_DATA3 | - | - |
| J2.50 | DGND | Ground | - |
| J2.52 | SD4_DATA4 | UART2 RX | - |
| J2.54 | SD4_DATA5 | - | - |
| J2.56 | SD4_DATA6 | - | - |
| J2.58 | SD4_DATA7 | UART2 TX | - |
| J2.60 | PMIC_SDWNB | - | - |
| J2.62 | TEST_MODE | CPU TEST_MODE signal | - |
| J2.64 | RTC_INTn/SQW | RTC interrupt | RTC chip on Axel SOM |
| J2.66 | RTC_RSTn | RTC reset | RTC chip on Axel SOM |
| J2.68 | RTC_32kHz | RTC clock | RTC chip on Axel SOM |
| J2.70 | DGND | Ground | - |
| J2.72 | PMIC_INT_B | PMIC interrupt | Generated by PMIC |
| J2.74 | PMIC_PWRON | Power On from CPU to PMIC | - |
| J2.76 | CPU_ONOFF | CPU ONOFF signal | - |
| J2.78 | CPU_PORn | CPU Power On Reset | - |
| J2.80 | CPU_PMIC_STBY_REQ | CPU PMIC_STBY_REQ signal | - |
| J2.82 | CPU_PMIC_ON_REQ | CPU PMIC_ON_REQ signal | - |
| J2.84 | BOOT_MODE0 | CPU BOOT_MODE0 signal | - |
| J2.86 | BOOT_MODE1 | CPU BOOT_MODE1 signal | - |
| J2.88 | MRSTn | Master Reset | - |
| J2.90 | DGND | Ground | - |
| J2.92 | JTAG_TCK | JTAG | - |
| J2.94 | JTAG_VREF | JTAG | - |
| J2.96 | JTAG_TDI | JTAG | - |
| J2.98 | JTAG_TDO | JTAG | - |
| J2.100 | JTAG_TMS | JTAG | - |
| J2.102 | JTAG_nTRST | JTAG | - |
| J2.104 | RTC_VBAT | RTC Battery Power Supply | Battery on DACU board |
| J2.106 | NVCC_CSI_EXT | CPU NVCC_CSI Power Supply | - |
| J2.108 | DGND | Ground | - |
| J2.110 | NVCC_EIM_EXT | CPU NVCC_EIM Power Supply | - |
| J2.112 | DGND | Ground | - |
| J2.114 | NVCC_SD3_EXT | CPU NVCC_SD3 Power Supply | - |
| J2.116 | DGND | Ground | - |
| J2.118 | NVCC_LCD_EXT | CPU NVCC_LCD Power Supply | - |
| J2.120 | DGND | Ground | - |
| J2.122 | PMIC_PROG_SCL | PMIC Control signal | - |
| J2.124 | PMIC_PROG_SDA | PMIC Control signal | - |
| J2.126 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.128 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.130 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.132 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.134 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.136 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.138 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
| J2.140 | 2V8-4V5_SOM | 2.8V-4.5V Power Supply | - |
J3[edit | edit source]
J3 is a Hirose FX8C-140P-SV4 140-pin header connector for the hosted Axel SoM. The following tables reports the connector's pinout:
J3 odd pins (1 to 139)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J3.1 | SD3_CLK | SD3 Clock | - |
| J3.3 | DGND | Ground | - |
| J3.5 | SD3_CMD | SD3 Cmd | - |
| J3.7 | SD3_RST | General Purpose I/O | - |
| J3.9 | DGND | Ground | - |
| J3.11 | SD3_DATA0 | SD3 data[0] | - |
| J3.13 | SD3_DATA1 | SD3 data[1] | - |
| J3.15 | SD3_DATA2 | SD3 data[2] | - |
| J3.17 | SD3_DATA3 | SD3 data[3] | - |
| J3.19 | SD3_DATA4 | SD3 data[4] | - |
| J3.21 | SD3_DATA5 | SD3 data[5] | - |
| J3.23 | SD3_DATA6 | SD3 data[6] | - |
| J3.25 | SD3_DATA7 | SD3 data[7] | - |
| J3.27 | DGND | Ground | - |
| J3.29 | MLB_SN | - | - |
| J3.31 | MLB_SP | - | - |
| J3.33 | DGND | Ground | - |
| J3.35 | MLB_CN | - | - |
| J3.37 | MLB_CP | - | - |
| J3.39 | DGND | Ground | - |
| J3.41 | MLB_DN | - | - |
| J3.43 | MLB_DP | - | - |
| J3.45 | DGND | Ground | - |
| J3.47 | SATA_RXN | Sata RX - | - |
| J3.49 | SATA_RXP | Sata RX+ | - |
| J3.51 | DGND | Ground | - |
| J3.53 | SATA_TXN | Sata TX - | - |
| J3.55 | SATA_TXP | Sata TX+ | - |
| J3.57 | DGND | Ground | - |
| J3.59 | CPU_RGMII_TXC_CONN | - | - |
| J3.61 | DGND | Ground | - |
| J3.63 | CPU_RGMII_TD0_CONN | - | - |
| J3.65 | CPU_RGMII_TD1_CONN | - | - |
| J3.67 | CPU_RGMII_TD2_CONN | - | - |
| J3.69 | CPU_RGMII_TD3_CONN | - | - |
| J3.71 | CPU_RGMII_TX_CTL_CONN | - | - |
| J3.73 | DGND | Ground | - |
| J3.75 | CPU_RGMII_RXC_CONN | - | - |
| J3.77 | DGND | Ground | - |
| J3.79 | CPU_RGMII_RD0_CONN | - | - |
| J3.81 | CPU_RGMII_RD1_CONN | - | - |
| J3.83 | CPU_RGMII_RD2_CONN | - | - |
| J3.85 | CPU_RGMII_RD3_CONN | - | - |
| J3.87 | CPU_RGMII_RX_CTL_CONN | - | - |
| J3.89 | DGND | Ground | - |
| J3.91 | ETH0_CLK125_NDO | - | - |
| J3.93 | DGND | Ground | - |
| J3.95 | ETH0_INTn | Interrupt output from Ethernet transceiver | - |
| J3.97 | ENET_TX_EN/GPIO1_IO28 | Ethernet transceiver: chip reset | - |
| J3.99 | ENET_CRS_DV//SW2_1.8V/3.3V | - | - |
| J3.101 | ENET_REF_CLK/VDDCORE | - | - |
| J3.103 | ENET_RX_ER//VDDSOC | - | - |
| J3.105 | ENET_RXD0//DDR_1V5 | - | - |
| J3.107 | ENET_RXD1 | - | - |
| J3.109 | ENET_TXD0//BB_3.3V/2.5V | - | - |
| J3.111 | ENET_TXD1//1V2_ETH | - | - |
| J3.113 | KEY_COL4//VDDHIGH_VPH | USB OTG control signal | - |
| J3.115 | KEY_ROW4//VDDSOC_CAP | USB OTG control signal | - |
| J3.117 | WDT_WDI//VDDPU | Watchdog input | - |
| J3.119 | VDD_ARM23_CAP//VGEN4_1V8 | Power Supply signal | - |
| J3.121 | VDD_ARM01_CAP//VGEN5_2V8//VDD_VBUS_CAP | Power Supply signal | - |
| J3.123 | VDD_SNVS_CAP//VGEN3_2V5//NVCC_PLL_OUT | Power Supply signal | - |
| J3.125 | VGEN1 | Power Supply signal | - |
| J3.127 | VGEN2 | Power Supply signal | - |
| J3.129 | VGEN6 | Power Supply signal | - |
| J3.131 | SW4_xV/1.8V | Power Supply signal | - |
| J3.133 | PMIC_SWBST_SUPPLY | Power Supply signal | - |
| J3.135 | PMIC_SWBST_SUPPLY | Power Supply signal | - |
| J3.137 | PMIC_SWBST_SUPPLY | Power Supply signal | - |
| J3.139 | DGND | Ground | - |
J3 even pins (2 to 140)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J3.2 | DGND | Ground | - |
| J3.4 | CSI_CLK0M | - | - |
| J3.6 | CSI_CLK0P | - | - |
| J3.8 | DGND | Ground | - |
| J3.10 | CSI_D0M | - | - |
| J3.12 | CSI_D0P | - | - |
| J3.14 | DGND | Ground | - |
| J3.16 | CSI_D1M | - | - |
| J3.18 | CSI_D1P | - | - |
| J3.20 | DGND | Ground | - |
| J3.22 | CSI_D2M | - | - |
| J3.24 | CSI_D2P | - | - |
| J3.26 | DGND | Ground | - |
| J3.28 | CSI_D3M | - | - |
| J3.30 | CSI_D3P | - | - |
| J3.32 | DGND | Ground | - |
| J3.34 | DSI_CLK0M | - | - |
| J3.36 | DSI_CLK0P | - | - |
| J3.38 | DGND | Ground | - |
| J3.40 | DSI_D0M | - | - |
| J3.42 | DSI_D0P | - | - |
| J3.44 | DGND | Ground | - |
| J3.46 | DSI_D1M | - | - |
| J3.48 | DSI_D1P | - | - |
| J3.50 | DGND | Ground | - |
| J3.52 | LVDS1_TX0_N | LVDS1 TX0 - | - |
| J3.54 | LVDS1_TX0_P | LVDS1 TX0 + | - |
| J3.56 | DGND | Ground | - |
| J3.58 | LVDS1_TX1_N | LVDS1 TX1 - | - |
| J3.60 | LVDS1_TX1_P | LVDS1 TX1 + | - |
| J3.62 | DGND | Ground | - |
| J3.64 | LVDS1_TX2_N | LVDS1 TX2 - | - |
| J3.66 | LVDS1_TX2_P | LVDS1 TX2 + | - |
| J3.68 | DGND | Ground | - |
| J3.70 | LVDS1_CLK_N | LVDS1 Clock - | - |
| J3.72 | LVDS1_CLK_P | LVDS1 Clock + | - |
| J3.74 | DGND | Ground | - |
| J3.76 | LVDS1_TX3_N | LVDS1 TX3 - | - |
| J3.78 | LVDS1_TX3_P | LVDS1 TX3 + | - |
| J3.80 | DGND | Ground | - |
| J3.82 | HDMI_CLKN | HDMI Clock - | - |
| J3.84 | HDMI_CLKP | HDMI Clock + | - |
| J3.86 | DGND | Ground | - |
| J3.88 | HDMI_D0N | HDMI D0 - | - |
| J3.90 | HDMI_D0P | HDMI D0 + | - |
| J3.92 | DGND | Ground | - |
| J3.94 | HDMI_D1N | HDMI D1 - | - |
| J3.96 | HDMI_D1P | HDMI D1+ | - |
| J3.98 | DGND | Ground | - |
| J3.100 | HDMI_D2N | HDMI D2 - | - |
| J3.102 | HDMI_D2P | HDMI D2 + | - |
| J3.104 | DGND | Ground | - |
| J3.106 | HDMI_CEC_IN | HDMI CE_REMOTE | - |
| J3.108 | HDMI_HPD | HDMI Hot Plug Detect | - |
| J3.110 | DGND | Ground | - |
| J3.112 | CLK1_N | PCI Reference Clock - | - |
| J3.114 | CLK1_P | PCI Reference Clock + | - |
| J3.116 | DGND | Ground | - |
| J3.118 | CLK2_N | - | - |
| J3.120 | CLK2_P | - | - |
| J3.122 | DGND | Ground | - |
| J3.124 | PCIE_RXN | PCI Express RX - | - |
| J3.126 | PCIE_RXP | PCI Express RX + | - |
| J3.128 | DGND | Ground | - |
| J3.130 | PCIE_TXN | PCI Express TX - | - |
| J3.132 | PCIE_TXP | PCI Express TX + | - |
| J3.134 | DGND | Ground | - |
| J3.136 | PMIC_5V | PMIC 5V Power Supply | - |
| J3.138 | PMIC_5V | PMIC 5V Power Supply | - |
| J3.140 | DGND | Ground | - |
J4[edit | edit source]
J4 is a Hirose FX8C-140S-SV5 140-pin receptacle for the connection to the Dacu carrier bord. The following tables reports the connector's pinout:
J4 odd pins (1 to 139)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J4.1 | DGND | Ground | - |
| J4.3 | DGND | Ground | - |
| J4.5 | N.C. | - | - |
| J4.7 | EIM_D25 | UART3 RX | - |
| J4.9 | RTC_VBAT/PMIC_LICELL | RTC Battery Power Supply | - |
| J4.11 | N.C. | - | - |
| J4.13 | DGND | Ground | - |
| J4.15 | ADC0_IN | Touchscreen Controller: in1 | |
| J4.17 | ENET_CRS_DV//SW2_1.8V/3.3V | - | - |
| J4.19 | N.C. | - | - |
| J4.21 | N.C. | - | - |
| J4.23 | N.C. | - | - |
| J4.25 | SD4_DATA1 | - | - |
| J4.27 | SD4_DATA2 | - | - |
| J4.29 | DISP0_DAT18 | Digital video: data-bit[18] | - |
| J4.31 | DISP0_DAT19 | Digital video: data-bit[19] | - |
| J4.33 | DISP0_DAT20 | Digital video: data-bit[20] | - |
| J4.35 | DGND | Ground | - |
| J4.37 | N.C. | - | - |
| J4.39 | TSC_XP | Touchscreen Controller: X+ | |
| J4.41 | TSC_XM | Touchscreen Controller: X- | |
| J4.43 | TSC_YP | Touchscreen Controller: Y+ | |
| J4.45 | TSC_YM | Touchscreen Controller: Y- | |
| J4.47 | DISP0_DAT17 | Digital video: data-bit[17] | - |
| J4.49 | DISP0_DAT15 | Digital video: data-bit[15] | - |
| J4.51 | DISP0_DAT13 | Digital video: data-bit[13] | - |
| J4.53 | DISP0_DAT11 | Digital video: data-bit[11] | - |
| J4.55 | DISP0_DAT9 | Digital video: data-bit[9] | - |
| J4.57 | DISP0_DAT7 | Digital video: data-bit[7] | - |
| J4.59 | DISP0_DAT5 | Digital video: data-bit[5] | - |
| J4.61 | DISP0_DAT3 | Digital video: data-bit[3] | - |
| J4.63 | DGND | Ground | - |
| J4.65 | DISP0_DAT1 | Digital video: data-bit[1] | - |
| J4.67 | N.C. | - | - |
| J4.69 | DI0_PIN3 | Digital video: Vsync | - |
| J4.71 | DI0_DISP_CLK | Digital video: pixel clock | - |
| J4.73 | N.C. | - | - |
| J4.75 | N.C. | - | - |
| J4.77 | N.C. | - | - |
| J4.79 | N.C. | - | - |
| J4.81 | N.C. | - | - |
| J4.83 | N.C. | - | - |
| J4.85 | N.C. | - | - |
| J4.87 | N.C. | - | - |
| J4.89 | DGND | Ground | - |
| J4.91 | N.C. | - | - |
| J4.93 | N.C. | - | - |
| J4.95 | N.C. | - | - |
| J4.97 | N.C. | - | - |
| J4.99 | N.C. | - | - |
| J4.101 | N.C. | - | - |
| J4.103 | N.C. | - | - |
| J4.105 | N.C. | - | - |
| J4.107 | KEY_COL4/VDDHIGH_VPH | ||
| J4.109 | N.C. | - | - |
| J4.111 | N.C. | - | - |
| J4.113 | DGND | Ground | - |
| J4.115 | N.C. | - | - |
| J4.117 | SD3_DATA2 | SD3 data[2] | - |
| J4.119 | SD1_DAT0 | - | - |
| J4.121 | SD1_DAT1 | - | - |
| J4.123 | SD1_DAT2 | - | - |
| J4.125 | SD1_DAT3 | - | - |
| J4.127 | SD3_DATA4 | ||
| J4.129 | SD3_DATA5 | SD3 data[5] | |
| J4.131 | N.C. | - | - |
| J4.133 | N.C. | - | - |
| J4.135 | SD1_CMD | - | - |
| J4.137 | SD1_CLK | - | - |
| J4.139 | DGND | Ground | - |
J4 even pins (2 to 140)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J4.2 | DGND | Ground | - |
| J4.4 | DGND | Ground | - |
| J4.6 | N.C. | - | - |
| J4.8 | EIM_D24 | UART3 TX | - |
| J4.10 | N.C. | - | - |
| J4.12 | N.C. | - | - |
| J4.14 | N.C. | - | - |
| J4.16 | USB_OTG_VBUS | USB power supply (+5V) | - |
| J4.18 | DISP0_DAT21 | Digital video: data-bit[21] | - |
| J4.20 | N.C. | - | - |
| J4.22 | N.C. | - | - |
| J4.24 | DISP0_DAT22 | Digital video: data-bit[22] | - |
| J4.26 | DISP0_DAT23 | Digital video: data-bit[23] | - |
| J4.28 | DGND | Ground | - |
| J4.30 | N.C. | - | - |
| J4.32 | KEY_ROW4/VDDSOC_CAP | USB OTG control signal | - |
| J4.34 | KEY_ROW2 | General Purpose I/O | - |
| J4.36 | SD4_DATA3 | - | - |
| J4.38 | N.C. | - | - |
| J4.40 | N.C. | - | - |
| J4.42 | N.C. | - | - |
| J4.44 | N.C. | - | - |
| J4.46 | DISP0_DAT16 | Digital video: data-bit[16] | |
| J4.48 | DISP0_DAT14 | Digital video: data-bit[14] | |
| J4.50 | DISP0_DAT12 | Digital video: data-bit[12] | |
| J4.52 | DGND | Ground | - |
| J4.54 | DISP0_DAT10 | Digital video: data-bit[10] | - |
| J4.56 | DISP0_DAT8 | Digital video: data-bit[8] | - |
| J4.58 | DISP0_DAT6 | Digital video: data-bit[6] | - |
| J4.60 | DISP0_DAT4 | Digital video: data-bit[4] | - |
| J4.62 | DISP0_DAT21 | Digital video: data-bit[21] | - |
| J4.64 | DISP0_DAT0 | Digital video: data-bit[0] | - |
| J4.66 | DI0_PIN15 | Digital video: Data Enable | - |
| J4.68 | DI0_PIN2 | Digital video: Hsync | - |
| J4.70 | LCD0_BKLT_PWM | LCD0 backlight control signal | - |
| J4.72 | N.C. | - | - |
| J4.74 | N.C. | - | - |
| J4.76 | DGND | Ground | - |
| J4.78 | N.C. | - | - |
| J4.80 | N.C. | - | - |
| J4.82 | N.C. | - | - |
| J4.84 | N.C. | - | - |
| J4.86 | N.C. | - | - |
| J4.88 | N.C. | - | - |
| J4.90 | N.C. | - | - |
| J4.92 | N.C. | - | - |
| J4.94 | N.C. | - | - |
| J4.96 | GPIO_7/FLEXCAN_H | CAN bus 1 TX | - |
| J4.98 | GPIO_8/FLEXCAN_L | CAN bus 1 RX | - |
| J4.100 | DGND | Ground | - |
| J4.102 | N.C. | - | - |
| J4.104 | N.C. | - | - |
| J4.106 | N.C. | - | - |
| J4.108 | N.C. | - | - |
| J4.110 | N.C. | - | - |
| J4.112 | N.C. | - | - |
| J4.114 | N.C. | - | - |
| J4.116 | N.C. | - | - |
| J4.118 | SD3_DATA3 | SD3 data[3] | - |
| J4.120 | N.C. | - | - |
| J4.122 | N.C. | - | - |
| J4.124 | N.C. | - | - |
| J4.126 | DGND | Ground | - |
| J4.128 | SD3_CLK | SD3 Clock | - |
| J4.130 | SD3_CMD | SD3 Cmd | - |
| J4.132 | SD3_DATA0 | SD3 data[0] | - |
| J4.134 | SD3-DATA1 | SD3 data[1] | - |
| J4.136 | GPIO_3/I2C3_SCL | I2C bus 3 , CLOCK | - |
| J4.138 | GPIO_6/I2C3_SDA | I2C bus 3 , DATA | - |
| J4.140 | DGND | Ground | - |
J5[edit | edit source]
J5 is a Hirose FX8C-140S-SV5 140-pin receptacle for the connection to the Dacu carrier bord. The following tables reports the connector's pinout:
J5 odd pins (1 to 139)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J5.1 | 3.3V_DACU | 3.3V DACU Power Supply | - |
| J5.3 | DGND | Ground | - |
| J5.5 | N.C. | - | - |
| J5.7 | N.C. | - | - |
| J5.9 | N.C. | - | - |
| J5.11 | N.C. | - | - |
| J5.13 | N.C. | - | - |
| J5.15 | N.C. | - | - |
| J5.17 | N.C. | - | - |
| J5.19 | N.C. | - | - |
| J5.21 | N.C. | - | - |
| J5.23 | N.C. | - | - |
| J5.25 | N.C. | - | - |
| J5.27 | N.C. | - | - |
| J5.29 | N.C. | - | - |
| J5.31 | N.C. | - | - |
| J5.33 | USB_H1_VBUS | USB power supply (+5V) | - |
| J5.35 | 3.3V_DACU | 3.3V DACU Power Supply | - |
| J5.37 | DGND | Ground | - |
| J5.39 | 5V_DACU | 5V DACU Power Supply | - |
| J5.41 | 5V_DACU | 5V DACU Power Supply | - |
| J5.43 | NVCC_AXEL_I/O_3.3V/1.8V | 3.3/1.8V | - |
| J5.45 | 5V_DACU | 5V DACU Power Supply | - |
| J5.47 | 5V_DACU | 5V DACU Power Supply | - |
| J5.49 | 5V_DACU | 5V DACU Power Supply | - |
| J5.51 | N.C. | - | - |
| J5.53 | N.C. | - | - |
| J5.55 | N.C. | - | - |
| J5.57 | N.C. | - | - |
| J5.59 | N.C. | - | - |
| J5.61 | N.C. | - | - |
| J5.63 | N.C. | - | - |
| J5.65 | 3.3V_DACU | 3.3V DACU Power Supply | - |
| J5.67 | DGND | Ground | - |
| J5.69 | EIM_CS0 | SPI bus 2 Clock | - |
| J5.71 | GPIO_0 | SD Card Detect | - |
| J5.73 | EIM_RW | Boot Mode Select<br>SPI bus 2 Chip Select 0 | - |
| J5.75 | CSI0_DAT17 | - | - |
| J5.77 | CSI0_DAT18 | - | - |
| J5.79 | CSI0_DAT19 | - | - |
| J5.81 | N.C. | - | - |
| J5.83 | N.C. | - | - |
| J5.85 | N.C. | - | - |
| J5.87 | N.C. | - | - |
| J5.89 | N.C. | - | - |
| J5.91 | N.C. | - | - |
| J5.93 | EIM_D20 | - | - |
| J5.95 | N.C. | - | - |
| J5.97 | EIM_LBA | Boot Mode Select | - |
| J5.99 | N.C. | - | - |
| J5.101 | 3.3V_DACU | 3.3V DACU Power Supply | - |
| J5.103 | DGND | Ground | - |
| J5.105 | JTAG_TDI | JTAG | - |
| J5.107 | JTAG_TMS | JTAG | - |
| J5.109 | CPU_PORn | CPU Power On Reset | - |
| J5.111 | N.C. | - | - |
| J5.113 | N.C. | - | - |
| J5.115 | N.C. | - | - |
| J5.117 | N.C. | - | - |
| J5.119 | N.C. | - | - |
| J5.121 | SD4_DATA7 | UART2 TX | - |
| J5.123 | SD4_DATA5 | - | - |
| J5.125 | N.C. | - | - |
| J5.127 | N.C. | - | - |
| J5.129 | N.C. | - | - |
| J5.131 | N.C. | - | - |
| J5.133 | N.C. | - | - |
| J5.135 | N.C. | - | - |
| J5.137 | N.C. | - | - |
| J5.139 | DGND | Ground | - |
J5 even pins (2 to 140)[edit | edit source]
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| J5.2 | DGND | Ground | - |
| J5.4 | N.C. | - | - |
| J5.6 | N.C. | - | - |
| J5.8 | N.C. | - | - |
| J5.10 | N.C. | - | - |
| J5.12 | N.C. | - | - |
| J5.14 | N.C. | - | - |
| J5.16 | N.C. | - | - |
| J5.18 | N.C. | - | - |
| J5.20 | DGND | Ground | - |
| J5.22 | N.C. | - | - |
| J5.24 | N.C. | - | - |
| J5.26 | N.C. | - | - |
| J5.28 | N.C. | - | - |
| J5.30 | N.C. | - | - |
| J5.32 | N.C. | - | - |
| J5.34 | N.C. | - | - |
| J5.36 | N.C. | - | - |
| J5.38 | N.C. | - | - |
| J5.40 | N.C. | - | - |
| J5.42 | N.C. | - | - |
| J5.44 | N.C. | - | - |
| J5.46 | N.C. | - | - |
| J5.48 | N.C. | - | - |
| J5.50 | N.C. | - | - |
| J5.52 | N.C. | - | - |
| J5.54 | DGND | Ground | - |
| J5.56 | N.C. | - | - |
| J5.58 | N.C. | - | - |
| J5.60 | N.C. | - | - |
| J5.62 | N.C. | - | - |
| J5.64 | N.C. | - | - |
| J5.66 | N.C. | - | - |
| J5.68 | N.C. | - | - |
| J5.70 | N.C. | - | - |
| J5.72 | EIM_OE | SPI bus 2 Master In Slave Out | - |
| J5.74 | N.C. | - | - |
| J5.76 | EIM_CS1 | SPI bus 2 Master Out Slave In | - |
| J5.78 | N.C. | - | - |
| J5.80 | N.C. | - | - |
| J5.82 | DGND | Ground | - |
| J5.84 | N.C. | - | - |
| J5.86 | N.C. | - | - |
| J5.88 | N.C. | - | - |
| J5.90 | N.C. | - | - |
| J5.92 | N.C. | - | - |
| J5.94 | N.C. | - | - |
| J5.96 | JTAG_TDO | JTAG | - |
| J5.98 | JTAG_TCK | JTAG | - |
| J5.100 | JTAG_nTRST | JTAG | - |
| J5.102 | MRSTn | Master Reset | - |
| J5.104 | EIM_D19 | - | - |
| J5.106 | KEY_COL3/I2C2_SCL | I2C bus 2 , CLOCK | - |
| J5.108 | KEY_ROW3/I2C2_SDA | I2C bus 2 , DATA | - |
| J5.110 | N.C. | - | - |
| J5.112 | N.C. | - | - |
| J5.114 | N.C. | - | - |
| J5.116 | DGND | Ground | - |
| J5.118 | N.C. | - | - |
| J5.120 | CSI0_DAT10 | UART1 TX | - |
| J5.122 | CSI0_DAT11 | UART1 RX | - |
| J5.124 | USB_HOST_DP | USB Data + | - |
| J5.126 | N.C. | - | - |
| J5.128 | SD4_DATA4 | UART2 RX | - |
| J5.130 | SD4_DATA6 | - | - |
| J5.132 | N.C. | - | - |
| J5.134 | USB_HOST_DN | USB Data - | - |
| J5.136 | N.C. | - | - |
| J5.138 | 3.3V_DACU | 3.3V DACU Power Supply | - |
| J5.140 | DGND | Ground | - |
Ethernet port ETH - J6[edit | edit source]
J6 is a RJ45 Gigabit Ethernet connector.
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | ETH0_TXRX0_P | - | - |
| 2 | ETH0_TXRX0_M | - | - |
| 3 | ETH0_TXRX1_P | - | - |
| 4 | ETH0_TXRX2_P | - | - |
| 5 | ETH0_TXRX2_M | - | - |
| 6 | ETH0_TXRX1_M | - | - |
| 7 | ETH0_TXRX3_P | - | - |
| 8 | ETH0_TXRX3_M | - | - |
| 9 | NVCC_AXEL_I/O_3.3V/1.8V | - | - |
| 10 | ETH_SH | - | - |
| 11, 13 | NVCC_AXEL_I/O_3.3V/1.8V | - | - |
| 12 | ETH0_LED1 | - | - |
| 14 | ETH0_LED2 | - | - |
| 15, 16 | ETH_SH | - | - |
PCI Express - J7[edit | edit source]
J7 is PCI Express card edge connector V-type.
The following table reports the pinout of the connector:
| Pin# | Pin Name | Function | Notes |
|---|---|---|---|
| 1.SIDE_A | PCIE_PRSNT1 | PRSNT1# | - |
| 1.SIDE_B | EXT_12V | +12 V | - |
| 2.SIDE_A | EXT_12V | +12 V | - |
| 2.SIDE_B | EXT_12V | +12 V | - |
| 3.SIDE_A | EXT_12V | +12 V | - |
| 3.SIDE_B | N.C. | - | - |
| 4.SIDE_A | DGND | Ground | - |
| 4.SIDE_B | DGND | Ground | - |
| 5.SIDE_A | - | - | Pulldown 10K Ohm |
| 5.SIDE_B | N.C. | - | - |
| 6.SIDE_A | - | - | Pullup 10K Ohm, 3.3V |
| 6.SIDE_B | N.C. | - | - |
| 7.SIDE_A | N.C. | - | - |
| 7.SIDE_B | DGND | Ground | - |
| 8.SIDE_A | - | - | Pullup 10K Ohm, 3.3V |
| 8.SIDE_B | PCI_3V3 | +3.3V | - |
| 9.SIDE_A | PCI_3V3 | +3.3V | - |
| 9.SIDE_B | - | - | Pulldown 10K Ohm |
| 10.SIDE_A | PCI_3V3 | +3.3V | - |
| 10.SIDE_B | N.C. | - | - |
| 11.SIDE_A | CPU_PORn | PERST# | - |
| 11.SIDE_B | N.C. | - | - |
| 12.SIDE_A | DGND | Ground | - |
| 12.SIDE_B | N.C. | - | - |
| 13.SIDE_A | PCI_REFCLKP | REFCLK+ | - |
| 13.SIDE_B | DGND | Ground | - |
| 14.SIDE_A | PCI_REFCLKP | REFCLK- | - |
| 14.SIDE_B | PCIE_TXP | HSOp(0) | - |
| 15.SIDE_A | DGND | Ground | - |
| 15.SIDE_B | PCIE_TXN | HSOn(0) | - |
| 16.SIDE_A | PCIE_RXP | HSIp(0) | - |
| 16.SIDE_B | DGND | Ground | - |
| 17.SIDE_A | PCIE_RXN | HSIn(0) | - |
| 17.SIDE_B | PCIE_PRSNT2 | PRSNT2# | - |
| 18.SIDE_A | DGND | Ground | - |
| 18.SIDE_B | DGND | Ground | - |
HDMI - J8[edit | edit source]
J8 is a HDMI type A 19-pin receptacle connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | HDMI_D2P | HDMI D2+ | - |
| 2, 5, 8, 11, 17 |
DGND | Ground | - |
| 3 | HDMI_D2N | HDMI D2- | - |
| 4 | HDMI_D1P | HDMI D1+ | - |
| 6 | HDMI_D1N | HDMI D1- | - |
| 7 | HDMI_D0P | HDMI D0+ | - |
| 9 | HDMI_D0N | HDMI D0- | - |
| 10 | HDMI_CLKP | HDMI Clock+ | - |
| 12 | HDMI_CLKN | HDMI Clock- | - |
| 13 | CE_REMOTE_OUT | - | - |
| 14 | N.C. | - | - |
| 15 | - | - | Pullup 1.8K Ohm, 5V |
| 16 | - | - | Pullup 1.8K Ohm, 5V |
| 18 | 5V_OUT_HDMI | +5V | - |
| 19 | HDMI_HP_OUT | HotPlug Detect | - |
| 20, 21, 22, 23 | SH_SDMI | Shield | - |
LVDS1 - J10[edit | edit source]
J10 is a 10x2-pin 1.25mm pitch connector. It is used for connecting a Display panel to the integrated LVDS1 video interface of the AXEL SOM.
The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 2 | 3.3V_LCD | +3.3V | - |
| 3, 4, 7, 10, 13, 16, 19 |
DGND | Ground | - |
| 5 | LVDS1_TX0_N | TX0- | - |
| 6 | LVDS1_TX0_P | TX0+ | - |
| 8 | LVDS1_TX1_N | TX1- | - |
| 9 | LVDS1_TX1_P | TX1+ | - |
| 11 | LVDS1_TX2_N | TX2- | - |
| 12 | LVDS1_TX2_P | TX2+ | - |
| 14 | LVDS1_CLK_N | Clock- | - |
| 15 | LVDS1_CLK_P | Clock+ | - |
| 17 | LVDS1_P17 | Backlight PWM | - |
| 18 | LVDS1_P18 | 5V Power Supply | - |
| 20 | LVDS1_P20 | Ground | - |
| 21 | LVDS_SHIELD | Shield | - |
| 22 | LVDS_SHIELD_1 | Shield | - |
Backlight LCD - J11[edit | edit source]
J11 is a 2-pin 3.5mm pitch connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | LED_K | Backlight PWM control signal | - |
| 2 | LED_A | 5V Power Supply | - |
J12[edit | edit source]
J12 is a 2x1-pn 2.54mm pitch connector.The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | Ground | - |
| 2 | EXT_12V | 12V Power Supply | - |
MLB - J13[edit | edit source]
J13 is a QSH–020–01–L–D–A 0,50 mm Hi-speed socket. It is connected to the MLB Port.
The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | MLB_SN | - | - |
| 2 | ENET_TXD1//1V2_ETH | - | - |
| 3 | MLB_SP | - | - |
| 4, 5, 7, 8, 12, 13, 14, 15, 16, 18, 20, 21, 22, 23, 25, 26, 27, 28, 29, 30, 31, 32, 36 |
N.C | - | - |
| 9 | MLB_DN | - | - |
| 11 | MLB_DP | - | - |
| 17 | MLB_CN | - | - |
| 19 | MLB_CP | - | - |
| 24 | EIM_CS1 | - | - |
| 25 | GPIO_7//FLEXCAN1_H | - | - |
| 33 | KEY_COL3/I2C2_SCL | - | - |
| 34 | GPIO_17 | - | - |
| 35 | KEY_ROW3/I2C2_SDA | - | - |
| 37, 38, 39 | NVCC_AXEL_I/O_3.3V/1.8V | - | - |
| 40 | EXT_12V | - | - |
| 41, 42, 43, 44 | DGND | Ground | - |
CAM interface - J16[edit | edit source]
J16 is a 36-pin 0.50mm pitch vertical connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | CSI_D15, SPI_MOSI_IPU2_CS1 |
CAM DATA[15] | - |
| 2 | CSI_D14 | CAM DATA[14] | - |
| 3 | SPI1_CS_IPU2_CSI1 | - | - |
| 4 | CMOS_RST#_IPU2_CSI1 | CMOS Reset | - |
| 5 | SPI1_CLK_IPU2_CS1 | - | - |
| 6 | SPI1_CLK_IPU2_CS1 | - | - |
| 7 | CMOS_I2C_SDA | I2C DATA | - |
| 8 | CMOS_I2C_SCL | I2C CLOCK | - |
| 9 | EIM_DA9 | CAM DATA[0] | - |
| 10 | EIM_DA8 | CAM DATA[1] | - |
| 11 | DGND | Ground | - |
| 12 | DGND | Ground | - |
| 13 | EIM_DA7 | CAM DATA[2] | - |
| 14 | EIM_DA6 | CAM DATA[3] | - |
| 15 | EIM_DA5 | CAM DATA[4] | - |
| 16 | EIM_DA4 | CAM DATA[5] | - |
| 17 | EIM_DA3 | CAM DATA[6] | - |
| 18 | EIM_DA2 | CAM DATA[7] | - |
| 19 | EIM_DA1 | CAM DATA[8] | - |
| 20 | EIM_DA0 | CAM DATA[9] | - |
| 21 | CSI1_D10 | CAM DATA[10] | - |
| 22 | CSI1_D11 | CAM DATA[11] | - |
| 23 | CSI1_D12 | CAM DATA[12] | - |
| 24 | CSI1_D13 | CAM DATA[13] | - |
| 25 | CSI1_CAM_HS | CAM Hsync | - |
| 26 | CSI1_CAM_VS | CAM Vsync | - |
| 27 | DGND | Ground | - |
| 28 | CSI1_CAM_PCLK | CAM Pixel Clock | - |
| 29 | DGND | Ground | - |
| 30 | R_CMOS_CLK_IPU2_CSI1 | CMOS Clock | - |
| 31 | DGND | Ground | - |
| 32 | N.C. | - | - |
| 33 | N.C. | - | - |
| 34 | CAM_VCC_IPU2_CSI1 | Power Supply | - |
| 35 | CAM_VCC_IPU2_CSI1 | Power Supply | - |
| 36 | CAM_VCC_IPU2_CSI1 | Power Supply | - |
| 37, 38, 39, 40 | SH_CAM | Shield to Ground | - |
USB - J26[edit | edit source]
J26 is a standard USB Mini AB connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | VIN_USB | Power Supply | - |
| 2 | USBDN | USB Data- | - |
| 3 | USBDP | USB Data+ | - |
| 4 | N.C. | - | - |
| 5 | DGND | Ground | - |
| 6, 7, 8, 9 | RING | Shield to Ground | - |
UART3 - J28[edit | edit source]
J28 is a standard DB9 connector for the RS232 two-wires UART3 port. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 4, 6, 9 | N.C. | N.C. | |
| 2 | UART_EXT_RX | Receive line | Connected to protection diode array |
| 3 | UART_EXT_TX | Transmit line | Connected to protection diode array |
| 5 | DGND | Ground | |
| 7 | UART_EXT_RTS | UART3 RTS | - |
| 8 | UART_EXT_CTS | UART3 CTS | - |
USB OTG - J29[edit | edit source]
J29 is a standard USB Micro AB connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | USB_OTG_VBUS_F | Power Supply | - |
| 2 | OTG_DM | USB Data- | - |
| 3 | OTG_DP | USB Data+ | - |
| 4 | OTG_ID | OTG ID signal | - |
| 5 | USB_OTG_DGN | Ground | - |
| 6, 7, 8, 9 | USB_OTG_SHIELD | Shield to Ground | - |
SOM Power Voltage Selector - J32[edit | edit source]
J32 is a 4x2-pin 2.54 pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | - | - | - |
| 2 | - | - | - |
| 3 | - | - | - |
| 4 | - | - | - |
| 5 | - | - | - |
| 6 | - | - | - |
| 7 | - | - | - |
| 8 | - | - | - |
SOM power voltage selection:
- all open: 2.8V
- 1-2 closed: 3.0V
- 3-4 closed: 3.3V
- 5-6 closed: 4.2V
- 7-8 closed: 4.5v
J33[edit | edit source]
J33 is a 2x1-pin 2.54 pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | Ground | - |
| 2 | 5V | 5V Power Supply | - |
J34[edit | edit source]
J34 is a 2x1-pin 2.54 pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | Ground | - |
| 2 | NVCC_AXEL_I/O_3.3V/1.8V | Power Supply | - |
J36[edit | edit source]
J36 is a 2x1-pin 2.54 pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | PMIC_PWRON | - | - |
| 2 | 2V8-4V5_SOM_POWER_GOOD | - | - |
J40[edit | edit source]
J40 is a 4x1-pin 2.54 pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 4 | DGND | Ground | - |
| 2 | CLK2_N | - | - |
| 3 | CLK2_P | - | - |
J42[edit | edit source]
J42 is a 2x1-pin 2.54 pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | Ground | - |
| 2 | PMIC_5V | - | - |
IPU2_CSI1 (Generic Camera in) - J43[edit | edit source]
J43 is a 17x2-pin 1.27mm pitch receptacle connector.
The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | R_CMOS_CLK_IPU2_CSI1 | CMOS Clock | - |
| 2 | CSI1_D11 | CAM DATA[11] | - |
| 3 | DGND | Ground | - |
| 4 | CSI1_D10 | CAM DATA[10] | - |
| 5 | CMOS_I2C_SDA | I2C DATA | - |
| 6 | EIM_DA0 | CAM DATA[9] | - |
| 7 | CMOS_I2C_SCL | I2C CLOCK | - |
| 8 | EIM_DA1 | CAM DATA[8] | - |
| 9 | CMOS_RST#_IPU2_CSI1 | CMOS Reset | - |
| 10 | EIM_DA2 | CAM DATA[7] | - |
| 11 | CMOS_OE#_IPU2_CSI1 | CMOS OE# | - |
| 12 | EIM_DA3 | CAM DATA[6] | - |
| 13 | DGND | Ground | - |
| 14 | EIM_DA4 | CAM DATA[5] | - |
| 15 | CAM_VCC_2.8V_IPU2_CSI | 2.8V Power Supply | - |
| 16 | EIM_DA5 | CAM DATA[4] | - |
| 17 | CAM_VCC_2.8V_IPU2_CSI | 2.8V Power Supply | - |
| 18 | EIM_DA6 | CAM DATA[3] | - |
| 19 | DGND | Ground | - |
| 20 | EIM_DA7 | CAM DATA[2] | - |
| 21 | DGND | Ground | - |
| 22 | EIM_DA8 | CAM DATA[1] | - |
| 23 | CSI1_D13 | 3.3V Power Supply | - |
| 24 | EIM_DA9 | CAM DATA[0] | - |
| 25 | CAM_VCC_IPU2_CSI1 | 3.3V Power Supply | - |
| 26 | CAM_VCC_IPU2_CSI1 | 3.3V Power Supply | - |
| 27 | DGND | Ground | - |
| 28 | CSI1_CAM_PCLK | CAM Pixel Clock | - |
| 29 | CAM_VCC_1.8V_IPU2_CSI | 1.8V Power Supply | - |
| 30 | CSI1_CAM_HS | CAM Hsync | - |
| 31 | CAM_VCC_1.8V_IPU2_CSI | 1.8V Power Supply | - |
| 32 | CSI1_CAM_VS | CAM Vsync | - |
| 33 | CSI1_D13 | CAM DATA[13] | - |
| 34 | EIM_D28 | CAM DATA[12] | - |
EXPANSION CONNECTOR - J44[edit | edit source]
J44 is a 10x2-pin 2.54mm pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | Ground | - |
| 2 | DGND | Ground | - |
| 3 | EIM_A25 | - | - |
| 4 | SD3_RST | - | - |
| 5 | EIM_BCLK | - | - |
| 6 | NVCC_SD3_EXT | - | - |
| 7 | NVCC_EIM_EXT | - | - |
| 8 | SD3_DATA6 | - | - |
| 9 | RGMII_MDC | - | - |
| 10 | SD3_DATA7 | - | - |
| 11 | RGMII_MDIO | - | - |
| 12 | DI0_PIN4 | - | - |
| 13 | VGEN4_1V8_I | - | - |
| 14 | NVCC_LCD_EXT | - | - |
| 15 | DATA0/NANDF_DQS | - | - |
| 16 | KEY_COL3/I2C2_SCL | - | - |
| 17 | NVCC_AXEL_I/O_3.3V/1.8V | - | - |
| 18 | KEY_ROW3/I2C2_SDA | - | - |
| 19 | DGND | Ground | - |
| 20 | DGND | Ground | - |
EXPANSION CONNECTOR - J46[edit | edit source]
J46 is a 10x2-pin 2.54mm pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | Ground | - |
| 2 | DGND | Ground | - |
| 3 | RTC_VBAT | - | - |
| 4 | VDD_ARM23_CAP//VGEN4_1V8 | - | - |
| 5 | PMIC_LICELL | - | - |
| 6 | VDD_ARM01_CAP//VGEN5_2V8//VDD_VBUS_CAP | - | - |
| 7 | PMIC_VSNVS | - | - |
| 8 | VDD_SNVS_CAP//VGEN3_2V5//NVCC_PLL_OUT | - | - |
| 9 | VGEN1 | - | - |
| 10 | VGEN6 | - | - |
| 11 | VGEN2 | - | - |
| 12 | NVCC_AXEL_I/O_3.3V/1.8V | - | - |
| 13 | WDT_WDI//VDDPU | - | - |
| 14 | DGND | Ground | - |
| 15 | EIM_D16 | - | - |
| 16 | EIM_D23 | - | - |
| 17 | EIM_D18 | - | - |
| 18 | DGND | Ground | - |
| 19 | DGND | Ground | - |
| 20 | DGND | Ground | - |
LVDS0 - J48[edit | edit source]
J48 is a 10x2-pin 2.54mm pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 2, 5, 8, 11, 14, 17, 19, 20 |
DGND | Ground | - |
| 3 | LVDS0_TX0_N | TX0- | - |
| 4 | LVDS0_TX0_P | TX0+ | - |
| 6 | LVDS0_TX1_P | TX1+ | - |
| 7 | LVDS0_TX1_N | TX1- | - |
| 9 | LVDS0_TX2_N | TX2- | - |
| 10 | LVDS0_TX2_P | TX2+ | - |
| 12 | LVDS0_CLK_N | Clock- | - |
| 13 | LVDS0_CLK_P | Clock+ | - |
| 15 | LVDS0_P17 | Backlight PWM | - |
| 16 | LVDS0_P18 | 5V Power Supply | - |
| 18 | LVDS0_P20 | Ground | - |
IPU1_CSI0 (1/2) - J50[edit | edit source]
J50 is a 10x2-pin 2.54mm pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | CSI0_DAT11 | CAM DATA[11] | - |
| 2 | R_CMOS_CLK_IPU1_CSI0 | CMOS Clock | - |
| 3 | CSI0_DAT10 | CAM DATA[10] | - |
| 4 | DGND | Ground | - |
| 5 | CSI0_DAT9 | CAM DATA[9] | - |
| 6 | CMOS_I2C_SDA | I2C DATA | - |
| 7 | CSI0_DAT8 | CAM DATA[8] | - |
| 8 | CMOS_I2C_SCL | I2C CLOCK | - |
| 9 | CSI0_DAT7 | CAM DATA[7] | - |
| 10 | CMOS_RST#_IPU1_CSI0 | CMOS_RST# | - |
| 11 | CSI0_DAT6 | CAM DATA[6] | - |
| 12 | CMOS_OE#_IPU1_CSI0 | CMOS_OE# | - |
| 13 | CSI0_DAT5 | CAM DATA[5] | - |
| 14 | DGND | Ground | - |
| 15 | CSI0_DAT4 | CAM DATA[4] | - |
| 16 | CAM_VCC_2.8V_IPU1_CSI0 | 2.8V Power Supply | - |
| 17 | EIM_D30 | CAM DATA[3] | - |
| 18 | CAM_VCC_2.8V_IPU1_CSI0 | 2.8V Power Supply | - |
| 19 | EIM_D31 | CAM DATA[2] | - |
| 20 | DGND | Ground | - |
IPU1_CSI0 (2/2) - J51[edit | edit source]
J51 is a 10x2-pin 2.54mm pitch vertical header. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | EIM_D26 | CAM DATA[1] | - |
| 2 | DGND | Ground | - |
| 3 | EIM_D27 | CAM DATA[0] | - |
| 4, 5, 6 | CAM_VCC_IPU1_CSI0 | 3.3V Power Supply | - |
| 7 | CSI0_PIXCLK | CAM Pixel Clock | - |
| 8 | DGND | Ground | - |
| 9 | CSI0_MCLK | CAM Hsync | - |
| 10 | CAM_VCC_1.8V_IPU1_CSI0 | 1.8V Power Supply | - |
| 11 | CSI0_VSYNC | CAM Vsync | - |
| 12 | CAM_VCC_1.8V_IPU1_CSI0 | 1.8V Power Supply | - |
| 13 | CSI0_DAT12 | CAM DATA[12] | - |
| 14 | CSI0_DAT13 | CAM DATA[13] | - |
| 15 | CSI0_DAT16 | CAM DATA[16] | - |
| 16 | CSI0_DAT19 | CAM DATA[19] | - |
| 17 | CSI0_DAT17 | CAM DATA[17] | - |
| 18 | CSI0_DATA_EN | CAM DATA Enable | - |
| 19 | CSI0_DAT18 | CAM DATA[18] | - |
| 20 | NVCC_EIM_EXT | CSI1_VEXT | - |
MicroSD - J52[edit | edit source]
J52 is a microSD memory card connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | SD2_DAT2 | DATA[2] | - |
| 2 | SD2_DAT3 | Card Detect/DATA[3] | - |
| 3 | SD2_CMD | CMD line | - |
| 4 | NVCC_AXEL_I/O_3.3V/1.8V | Power Supply | - |
| 5 | SD2_CLK | Clock | - |
| 6, 9, 10, 11, 12 | DGND | - | - |
| 7 | SD2_DAT0 | DATA[0] | - |
| 8 | SD2_DAT1 | DATA[1] | - |
| 13 | GPIO_0 | - | Pull up to 3.3V with 10K Ohm - |
Pin strip connectors[edit | edit source]
J-PROG-MICRO1[edit | edit source]
J-PROG-MICRO1 is a 3x2-pin, 2.54mm pitch header, pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | BKGD_JM60 | - | - |
| 2 | DGND | Ground | - |
| 3, 5 | N.C. | - | - |
| 4 | RST_JM60 | - | - |
| 6 | VIN_USB | - | - |
J-PROG-PMIC1[edit | edit source]
J-PROG-PMIC1 is a 4x2-pin, 2.54mm pitch header, pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | PMIC_PROG_VPGM | - | - |
| 2 | 2V8-4V5 | - | - |
| 3 | DGND | Ground | - |
| 4 | PMIC_PROG_SCL | - | - |
| 5 | PMIC_PROG_SDA | - | - |
| 6 | PMIC_PWRON | - | - |
| 7 | MCU_GPIO1 | - | - |
| 8 | MCU_GPIO2 | - | - |
J-SEL-PROG1[edit | edit source]
J-SEL-PROG1 is a 3x1-pin, 2.54mm pitch header, pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | 2V8-4V5 | - | - |
| 2 | MIC_PROG_GATE_CTRl | - | - |
| 3 | DGND | Ground | - |
The available configurations are:
- jumper on 1-2, enable PMIC connection to programmer
- jumper on 2-3, disable PMIC connection to programmer
SATA - JP1[edit | edit source]
JP1 is a 7- pin header SATA connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 4, 7 | DGND | Ground | - |
| 2 | SATA_TXP | Sata TX+ | - |
| 3 | SATA_TXN | Sata TX- | - |
| 5 | SATA_RXN | Sata RX- | - |
| 6 | SATA_RXP | Sata RX+ | - |
| - | SH1 | Shield | - |
| - | SH2 | Shield | - |
SOM CONSUMPTION MONITOR - JP2[edit | edit source]
JP2 is a 5x1-pin, 2.54mm pitch header, pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | Ground | - |
| 2 | 2V8-4V5_SOM | SOM Power Supply | - |
| 3 | KEY_ROW3/I2C2_SDA | I2C2 Data | - |
| 4 | KEY_COL3/I2C2_SCL | I2C2 Clock | - |
| 5 | VCC_PM | Power Monitor Voltage Supply | - |
NVCC_CSI selection - JP3[edit | edit source]
JP3 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | - | - | Connetted to pin 3 |
| 2 | DGND | Ground | - |
| 3 | - | - | Connetted to pin 1 |
| 4, 6, 8, 10, 12, 14, 16 |
NVCC_CSI_EXT | - | - |
| 5 | 2V8-4V5_SOM | Power Supply | - |
| 7 | VGEN1 | Power Supply | - |
| 9 | VGEN2 | Power Supply | - |
| 11 | VGEN6 | Power Supply | - |
| 13 | VGEN4_1V8_I | Power Supply | - |
| 15 | NVCC_AXEL_I/O_3.3V/1.8V | Power Supply | - |
NVCC_EIM selection - JP4[edit | edit source]
JP4 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | - | - | Connetted to pin 3 |
| 2 | DGND | Ground | - |
| 3 | - | - | Connetted to pin 1 |
| 4, 6, 8, 10, 12, 14, 16 |
NVCC_EIM_EXT | - | - |
| 5 | 2V8-4V5_SOM | Power Supply | - |
| 7 | VGEN1 | Power Supply | - |
| 9 | VGEN2 | Power Supply | - |
| 11 | VGEN6 | Power Supply | - |
| 13 | VGEN4_1V8_I | Power Supply | - |
| 15 | NVCC_AXEL_I/O_3.3V/1.8V | Power Supply | - |
NVCC_SD3 selection - JP5[edit | edit source]
JP5 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | - | - | Connetted to pin 3 |
| 2 | DGND | Ground | - |
| 3 | - | - | Connetted to pin 1 |
| 4, 6, 8, 10, 12, 14, 16 |
NVCC_SD3_EXT | - | - |
| 5 | 2V8-4V5_SOM | Power Supply | - |
| 7 | VGEN1 | Power Supply | - |
| 9 | VGEN2 | Power Supply | - |
| 11 | VGEN6 | Power Supply | - |
| 13 | VGEN4_1V8_I | Power Supply | - |
| 15 | NVCC_AXEL_I/O_3.3V/1.8V | Power Supply | - |
NVCC_LCD selection - JP6[edit | edit source]
JP6 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | - | - | Connetted to pin 3 |
| 2 | DGND | Ground | - |
| 3 | - | - | Connetted to pin 1 |
| 4, 6, 8, 10, 12, 14, 16 |
NVCC_LCD_EXT | - | - |
| 5 | 2V8-4V5_SOM | Power Supply | - |
| 7 | VGEN1 | Power Supply | - |
| 9 | VGEN2 | Power Supply | - |
| 11 | VGEN6 | Power Supply | - |
| 13 | VGEN4_1V8_I | Power Supply | - |
| 15 | NVCC_AXEL_I/O_3.3V/1.8V | Power Supply | - |
MIPI CSI - JP7[edit | edit source]
JP7 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | CSI_D3P | Data3 + | |
| 2, 5, 8, 11, 14, 16 |
DGND | Ground | - |
| 3 | CSI_D3N | Data3- | |
| 4 | CSI_D2P | Data2+ | - |
| 6 | CSI_D2M | Data2- | - |
| 7 | CSI_D1P | Data1+ | - |
| 9 | CSI_D1M | Data1- | - |
| 13 | CSI_CLK0P | Clock+ | - |
| 15 | CSI_CLK0M | Clock- | - |
EXPANSION CONNECTOR - JP8[edit | edit source]
JP8 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 2 | DGND | Ground | |
| 3 | CPU_RGMII_TXC_CONN | - | |
| 4 | CPU_RGMII_RXC_CONN | - | |
| 5 | CPU_RGMII_TX_CTL_CONN | - | |
| 6 | CPU_RGMII_RX_CTL_CONN | - | |
| 7 | CPU_RGMII_TD0_CONN | - | |
| 8 | CPU_RGMII_RD0_CONN | - | |
| 9 | CPU_RGMII_TD1_CONN | - | |
| 10 | CPU_RGMII_RD1_CONN | - | |
| 11 | CPU_RGMII_TD2_CONN | - | |
| 12 | CPU_RGMII_RD2_CONN | - | |
| 13 | CPU_RGMII_TD3_CONN | - | |
| 14 | CPU_RGMII_RD3_CONN | - | |
| 15, 16 | VGEN4_1V8_I | Voltage Power Supply |
EXPANSION CONNECTOR - JP9[edit | edit source]
JP9 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 2, 5, 13 | DGND | Ground | |
| 3 | ETH0_CLK125_NDO | - | |
| 4 | NVCC_AXEL_I/O_3.3V/1.8V | - | |
| 6 | ENET_RXD0=//DDR_1V5 | - | |
| 7 | ENET_REF_CLK//VDDCORE | - | |
| 8 | ENET_RXD1 | - | |
| 9 | ENET_RX_ER//VDDSOC | - | |
| 10 | ENET_TXD0//BB_3.3V/2.5V | - | |
| 11 | ENET_TX_EN/GPIO1_IO28 | - | |
| 12 | ENET_TXD1//1V2_ETH | - | |
| 14,16 | VGEN4_1V8_I | - | |
| 15 | VGEN4_1V8_I | Voltage Power Supply |
JP10[edit | edit source]
JP10 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 2, 10, 11, 14, 15, 16 |
DGND | Ground | |
| 3 | PMIC_SDWNB | - | |
| 4 | RTC_32kHz | - | |
| 5 | PMIC_INT_B | - | |
| 6 | RTC_RSTn | - | |
| 7 | CPU_PMIC_STBY_REQ | - | |
| 8 | RTC_INTn/SQW | - | |
| 9 | TEST_MODE | - | |
| 12 | TAMPER | - | |
| 13 | GPIO_18/PMIC_INT_B | - |
MIPI DSI - JP11[edit | edit source]
JP11 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 2, 7, 8, 12, 13, 15, 16 |
DGND | Ground | |
| 3 | DSI_D1M | Data1 - | |
| 4 | DSI_CLOCK0M | Clock - | |
| 5 | DSI_D1P | Data1 + | |
| 6 | DSI_CLOCK0P | Clock + | |
| 9 | DSI_DOP | Data0 + | |
| 10 | NVCC_AXEL_I/O_3.3V/1.8 | - | |
| 11 | DSI_D0M | Data0 - | |
| 14 | SW4_xV/1.8V | - |
Schematics[edit | edit source]
- ORCAD: http://www.dave.eu/system/files/area-riservata/axelevb-lite-0.9.3-XELK-dsn.zip
- PDF: http://www.dave.eu/system/files/area-riservata/axelevb-lite-S.EVBA1000C0R-0.9.3.pdf
BOM[edit | edit source]
- AxelEVB-Lite: http://www.dave.eu/system/files/area-riservata/axelevb-lite_BOM_S.EVBA1000C0R_0.9.3.CSV_.zip
