AURA SOM/AURA Hardware/Power and Reset/JTAG
< AURA SOM | AURA Hardware
Revision as of 09:24, 13 September 2023 by U0007 (talk | contribs) (Created page with "{{subst:JTAG | nome-som=AURA}}")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| ID# | Issue Date | Notes | |
| Day/Month/Year | TBD | ||
| Day/Month/Year | TBD | ||
On board JTAG connector[edit | edit source]
TBD: sostituire con le informazioni del connettore e del pinout
JTAG signals are routed to a dedicated connector on the AURA PCB.
The connector is placed on the top side of the PCB, at the upper-right corner (please see the picture below).
TBD:CONN-REF - Connector's pinout[edit | edit source]
TBD:CONN-REF footprint mates with TBD:CONN-TYPE connector. The following table reports the connector's pinout:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | - | - |
| 2 | JTAG_TCK | - | - |
| 3 | JTAG_TMS | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 4 | JTAG_TDO | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 5 | JTAG_TDI | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 6 | JTAG_nTRST | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 7 | CPU_PORn | - | - |
| 8 | N.C. | - | - |
| 9 | N.C. | - | - |
| 10 | JTAG_VREF | - | 3V3 (BOARD_PGOOD driven signal) |
