| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Feb 2023 | DESK-MX8M-L-2.0.0 release | |
Contents
Peripheral USB-CEdit
SBC ORCAEdit
In SBC Orca two USB-C ports were mounted, that is:
- USB-C 1
- USB-C 2
USB-C 1Edit
The USB-C 1 port is used to power-supply the board and for the transfer of data by Downstream-Facing Port (DFP) mode.
In U-Boot you can use this port only to power-supply the board and not for data transfer.
In Linux you can use this port for data transfer.
For more information, refer to the example in USB1 OTG.
The connector that is inserted in this port works in both verses.
USB-C 2Edit
The USB-C 2 port is used for data transfer.
In U-Boot you can use this port to transmit data with an external device and to use the UUU functionality of NXP.
In Linux you can use the dual-role data mode (DRD).
For more information, refer to the example in X.
The connector that is inserted in this port works in both verses.